Our friend Lou S loves sports cars. You may have already seen his phenomenal 3.2L FairladyZ, FD RX-7, and vintage Mazda RX-4.  Lou has always wanted a Viper and recently acquired this 2002 GTS Final Edition model:

Final Edition means that Dodge produced only 360 cars.  This one is #320, one of the last GTS Vipers built and it only has 4400 miles on the odometer!

The Viper is pristine and Lou already has a few mods in mind like a header-back exhaust, Stoptech BBK, 3.55 gears, and wheels.

As usual when a new toy comes to ZCG we strap it on to the dyno!

 

 

Remember ladies and gentlemen this is a bone stock 2002 GTS with 4400 miles…factory crank hp figures are 450hp/490tq.  On the ZCG dyno the Viper put down an impressive 408hp/431tq to the wheels!

Congratulations Lou! We look forward to seeing the Viper in action, and we know the Z is in good company 🙂

The Vintage Auto Salon was held today at the San Leandro Marina and it was yet another successful show from the minds of Ivan and James of HJCG. They even arranged for special guest visits from Diane Krey-Wesley (“Mary” of the Ken and Mary Nissan commercials) and the famous Yoshiya Watanabe, founder of the Rocky Auto shop in Japan. Mr. Watanabe also hand-picked the award winners for the day!

What I love about the HJCG shows is the variety of cars from totally restored to works-in-progress and everything between. At each of their past shows I have been stunned by at least one rare, collectible JDM car. This year I was completely taken back by this incredibly gorgeous, impossibly-rare, jaw dropping Silvia:

This classy beauty exudes cool. Check out the split rear bumpers, jewel-like tailights, impressive front grille and a contrasting cream-colored interior:

The lowered stance and staggered Watanabe wheels against the pale green paint made this car almost too yummy for me to bear!

The Silvias were built on the Datsun Roadster’s frame employing the very same R16/4-speed drivetrain. Even the gauges and toggle switches were carry-overs. I had a hunch that this wasn’t a bone-stock Silvia though so I peered under the chassis and found a NISMO competition aluminum oil pan! I tracked down the owner and begged him to pop open the hood so I could quell my curiosity and behold…it had the mighty U20/5-speed with Solexes from a Datsun 2000. This elegant lady also packs a punch!

Z-car fans unite! Plenty of S30 action with some S130 love as well.  RHD S30 alert! This car now sports beautiful Watanabe wheels(left). Eric drove his TurboZX-powered S30 from Modesto:

You don’t have to be a Datsun/Nissan fan to appreciate the Skyline. Heads turned as three early, GC10 “Hakosukas” and even a 80’s DR30 Skyline came to the show…both coupes were shades of silver and sported flares, triple-carbed L-series motors, cherry interiors and spoilers:

Everyone’s favorite 4-door “Skyrine” also lives with this DR30 Skyline…hello 80’s!

Engine swaps are always entertaining to see and this show had transplants that ranged from “expected” to almost “bizzarre”…
Rotary die-hards this has got to be the ultimate “pissed-on” swap:  A Honda S2000 (F20C) drivetrain into a 1st gen RX-7. Complete with that requisite must-have for any F20-swapped car: the S2K gauge cluster. Yup:

Also rotary-related but nothing shockingly new are rotary swaps into Datsun 510s and Toyota Corollas. The green car is immaculate and won Mr. Watanabe’s heart. The orange 510 sports a roots-style supercharged (!) rotary!

Speaking of Datsun 510s, there were lots of clean SR/KA swapped cars and some amazingly stock examples as well:

 Cool trucks too!  Our roadster-friend Mark completed a KA24E engine swap into his 521 pickup (right)…

Gotta love those vintage wagons. Notice the almost “Chopped” look of the 610? Slim windows make for a cool profile…stock! The red Honda Civic had a boosted B-series. Several Toyota Coronas were present:

It was refreshing to see more Hondas at the show. The white EF Civic was super clean with an OCD-level of detail in the engine bay. We like it:

Have you ever seen a Toyota Sports 800 in person? Super tiny. Super rare!

More sweet Toyotas…I love the 1st gen Celica’s. I always thought the exterior and interior(dash) were ahead of their time:

 Wheels! Wheels! Wheels! Another way to get your JDM-wheel fix is to attend these shows!

We will end with my favorite car, the Datsun Roadster. There was a good showing with 6 roadsters at one point including Mike A’s ’68 SPL/SR20 (He drove up from Pomona!), my ‘67.5 SPL/SR20, Dave P’s ’67 SRL, Will C’s ’69 SRL and a red SPL:

 Our very own Dave P won the award for “Best Restored”…Mr. Watanabe and Rocky Auto approved! Congratulations Dave!

We want to give a big Thank You to James and Ivan for hosting another fun event. HJCG rules!

Lots of pictures in the gallery below so don’t forget to click after the jump!
…[read more]

Rich R is long time customer and loves to run with the Lockheed-Martin autocross group. He wanted stiffer ride without compromising ride height or going to full coil-overs. We installed Koni dampers with NISMO coil springs.

Enjoy the Ride Rich!

Mark G came to ZCG to have his NISMO Z33 wheels re-finished, T/C bushings replaced and get an UPREV tune. Since his Z was a base model it didn’t have the fancy multi-function steering wheel…UPREV tuning maps can be selected via the steering wheel mounted buttons so we did a complete gauge cluster/steering wheel swap.  The clutch switch was also replaced for the cruise control “cancel” button:

On the dyno, Rob’s UPREV tuning yielded +10hp/10tq  for a total of 270hp/253tq to the wheels. Check out the significant gains from mid-range to redline:

Here is another great Datsun family story that Z Car Garage is proud to be a part of.  John B’s mother actually bought this 240z brand new! The Z has been in their family ever since and eventually John became the owner. Unfortunately it had been sitting for a long time as the family changed residences and needed lots of work. ZCG to the rescue! We restored the brakes and suspension which were badly corroded/seized:

The front end was treated to new rotors and turned drums, new calipers and T/C rods from Techno Toy Tuning (3T). 3T is a company that helps keep vintage Japanese cars on the road by creating sweet suspension/chassis pieces. We love their products and continue to use them as seen on Grant’s 240z. Here are the old vs new calipers finished in black:

The hard, brittle tires and groovy slotted mags were replaced with fresh Bridgestone rubber and 16×7 Panasports. These are the “new” style Panasport castings with a brilliant anodized lip:

It is amazing what a little cleaning and some Panasports can do 🙂

Underhood, the engine had a severe exhaust leak. Actually, the entire exhaust system was badly rusted…

A full ZCG exhaust system from the MSA 6-2-1 header back to our trademark slash cut tip:

More engine bay work…the gnarly carbs were fully refurbished and dialed-in. We de-smogged the engine, restored the radiator, replaced the water pump and coolant by pass hoses:

Water pump:

More deteriorated rubber found in the fuel system:

A final touch we are proud of is the refinished cowl piece. ZCG  powdercoats it a matte-black finish that looks fantastic:

Dyno tuning produced a robust 140hp/152tq to the wheels:

With the engine bay in tip top shape John is ready to hit the road in this family heirloom Z!