New products continue to enter aftermarket for the 370Z, here is Rob to tell you about a new supercharger kit for the 370z!

ZCG was traveling south to the JCCS show we decided to take a detour and visit Rancho Cucamonga to visit GTM to check out their new Supercharger kit for the 370Z. Sam was nice enough to meet with us on a Saturday afternoon and give us a tour of the facility and it was impressive. The shop is amazing with late-model Nissans everywhere!!

This shop also includes an in-house machine shop, dyno, and alignment rack. After showing us around Sam allowed me to take the Shop Demo car for a ride. Having installed a Stillen supercharger already it was nice to check out Stillen’s competitor in the Forced Induction battle. First impression was quiet, nice driveability, and nice torque once the engine hits its sweet spot.
The boost takes over and seems like it keeps getting stronger as the rpms increase. Sam was surprised when I requested we throw it on the dyno.
Here is a short video Alvin took of the dyno run:

 

With the engine heat soaked and the temps in the shop close to 100 degrees the Z put down some good numbers: 380hp/305tq

Sam also shared some plots of pervious pulls with cooler temps, with readings of ~425hp/340tq.
Nice power and big torque.

Impressed! Excited to install one of these soon! Any takers?
Long live the Z
Rob

 

The first time I saw this pretty Datsun 510 was at the BlackHawk Nissan show last year, but I never met the owner. Fast forward to the TurnZ event in June. Finally spoke to owner, Matt G about his car very briefly. And only 2 weeks ago we hung out at the JCCS show and drove back up to Norcal together for almost 400 miles…I had to share his 510 and the story behind it with you.

This 510 was purchased on eBay in 2005, and during the 4 years following has undergone a complete restoration. Virtually every nut, bolt, bushing or seal has been replaced with new or like new used parts. The normal body rust that existed was
replaced with like metal, welded in place and rust proofed. The body was then seam sealed and rust proofed from the inside out and professionally prepared and painted by William’s Auto Body. All work done by Matt except for a few things!

 

The drive train and brakes were improved over stock equipment and a 1995 240SX 2.4L(KA24DE) engine and transmission where swapped in and a Greddy turbo kit added. Matt prepped the engine with oversize 9.0:1 forged WiseCo Pistons,  Forged Connecting Rods, and the head received a mild port and polish and early 1992 Intake and Exhaust Cams (longer duration).  ARP Head and Main studs, and a Cosmetic Metal head gasket keeps things tight.

 

The Greddy Turbo Kit(12psi) is made for the 240SX.   Custom piping, a proper recirc’d BOV, custom BMIC(that’s right bottom mount!) Bell intercooler with super trick air scoop (spring loaded for driveways, speed bumps, etc). The exhaust system is 2.5”  done in stainless by none other than Dan Gallmeister of DGR Fabrication and is finished by a dual-tipped Magnaflow muffler. Fuel duties are handled by custom bent 3/8 “ aluminum supply and return Lines, 300zx in-tank pump, Aeromotive regulator, and Nissan 370cc injectors.

 

Matt’s hard work paid off when he dyno’d the 510 at ZCarGarage on one of it’s Dyno Days. It made good power, spinning the rollers to the tune of 262hp/264tq to the wheels!

~300hp in a 2000lb car must be fun:)

 

To put all the power to the ground Matt modified the suspension both front and rear. Up front there are Energy Suspension bushings, 280ZX Struts with Tokico adjustable coilovers and adjustable camber plates.
In rear,  a penultimate rear crossmember with Proshock adjustable coilovers.
Braking is accomplished with 4-wheel discs, 280ZX fronts with vented rotors and 280zx rears with solid rotors. A 280ZX 15/16” master cylinder and custom e-brake handle complete the setup.

When we drove down from JCCS show I noticed the awesome stance on Matt’s 510. Great job restoring it and driving it because DATSUNS are driven!

 

That is what the license plate reads on this 240z that belongs to Mark and Michelle G. Although the Z may have ate money it has been loved and fully supported by the family for about 10years. The Z is at ZCarGarage getting a full mechanical restoration before going to Williams Auto Body for body/paint. It is being built for the street with occasional track use, so brakes and suspension had to be upgraded. ZCG installed a full Arizona Z Car suspension from front to rear including robust control arms, sway bars, and bushings.  The entire underbody was also prepped and undercoated:

The 200rwhp L31 engine features triple Mikuni 44 carbs, a rare Clifford 6-2 exhaust header, and a ZCG triple-carb heat shield. The stock transmission was replaced with a 240sx gearbox with a JWT flywheel and heavy duty clutch. In back an R200 LSD diff along with a Porsche 930 CV conversion round out the drivetrain modifications:

 

The rear portion of the exhaust was made to be removeable making adjustments/work easier:

 

The Z featured Porsche 993 Twin-Turbo calipers at all four-corners and though it is an incredible braking system it needed some work/proportioning so ZCG did some fine tuning.

 

Soon these gorgeous brakes will be encased by shiny new custom made 17″ Panasport C8 wheels!

Finally, a nice touch that is both functional and good-looking are some new pedals. Let the Heel/Toe boogie begin!

 

Stay tuned for more updates after the Z comes back from Williams with fresh body and paint!

Lots of detailed pictures of the suspension below:
…[read more]

The Japanese Classic Car Show(JCCS) was held on Sunday 9/12 in Long Beach, CA and it was incredible. This show started in ’06 at the Queen Mary, moved to a park venue in Irvine for a few years and returned to Long Beach where I hope it stays.

We left the Bay Area at 8am Saturday morning and spent the night aboard the Queen Mary(Hotel). This is an experience in itself and I highly recommend staying here not only for the convenience.

Sunday morning Rob and I gave the roadster a quick wipedown before driving a few hundred feet to the staging area of the show. The JCCS staff really have their act together and made parking a breeze. At first I thought it was impossible to fit all participants in as there were 200+! I parked with 18 other Datsun Roadsters under a tree lined area. We were right across from what turned out to be 61 Datsun 510s! Nissan/Datsun had a strong presence for sure.

Grabbed my goody bag from the registration booth and we started checking out all the J-tin in a semi-orderly fashion. No lawn chair lounging for us! We spoke with Ron Carter, Les Cannaday and John Morton near the MOTUL booth where the BRE 240z and BRE Roadster were being displayed. Morton treated show-goers with a long autograph session. It was great to see him in good spirits!

If there was any doubt about the growing popularity of Japanese vintage cars all you had to do was look at how many spectators lined up for the show, some waited more than 1hr! This is great for JCCS and all of us classic car owners. Having a good venue doesn’t hurt either 🙂

Make sure to check out all of the pictures below at the end. The bar is contantly being raised and the level of detaiI/restoration of the cars these days is tremendous! I can’t possibly discuss all of the awesome cars but here are a few that caught our attention:

Randy Yee’s 240z with an RB26 drivetrain. Super clean, track-day resto. Flat black wrinkle powdercoating.  Simple interior. And what made me go gaga was the BRE-style exhaust system…why don’t we see this more often? Maybe it’s too loud 🙂

Wheels, wheels and more wheels! A JDM-wheel fanatic would appreciate the variety on display. From Volk’s new TE37Vintage wheel, various WORK and SSR wheels, ultra-rare Sakuras(the pink ones), Compmotive, TRD, even CCW showed up on 510s! Lots of Rota RB-R too:

This Nissan Patrol pickup truck was imported from Saudi Arabia!

61 510s, and it seemed like over half had some kind of engine swap. In a sea of SR20s and KAs this Dime built by Mario of TSR really stood out. John Morton was enamored with the engine bay! Lots of attention to detail in this one. Check out the welding. I love 510s

The Nissan 200sx or Silvia (S12 chassis) is often overlooked stateside. These cars were modded out and looking great.Yes, One had an RB26!

The Honda N60 models are coming out of the woodwork. There were about 10, all with mild to wild mods! Lots of CVCCs too.

Toyota and Mazda had a strong showing. Several 1/2Jz-swapped cars, Rotary pickups.

From L to R: This 18RG-powered Toyota looked boosted with period parts. I always liked the lines and B-pillarless body of the Celicas(RA). Fender-flared, wide-tired and mean Starlets are always welcome

This Mazda RX-4 wagon had FD Rx-7 running gear, front suspension bits and a linked Ford rear end…wicked:

I always like to see and hear car stories from owners. Interesting stickers also catch my eye, here are some highlights 🙂

It was an awesome weekend. We traveled 860 miles to see the show, and we did it in a Datsun. The sheer number of spectators and participants at JCCS 2010 reminds us that Japanese Classic Cars are still gaining popularity and recognition. Here’s to JCCS 2011!
UPDATE: ZCarGarage built the 1st place-winning Datsun Roadster in the “Modified” category!

For more information on 2010 Winners from all categories check the JCCS website

Full photo album below so click and enjoy!
…[read more]

Over the last few years ZCG has been listed as a top tier Vortech dealer. Every few weeks we get calls to install Vortech kits on non-Nissan cars but we rarely get the chance to do this since the shop is usually packed with Z projects. Once in a while though we have the opportunity to build and drive some of that V8 muscle that we all hear so much about.

A few weeks ago ZCG received a call from Jeff in Fresno. He was having trouble getting called back by his local hot rod shop. He owned a 2010 Camaro SS, which is no slouch to begin with but he wanted more power.
Rob and Jeff spoke on the phone about his power needs. We were familiar with the Vortech product and as long as he didn’t mind his American muscle being surrounded by Nissans ZCG was in to help. Jeff placed his order and a few days later his buddies towed the Camaro to ZCG. The car was very nice and we baseline dynoed it that day! It made a solid 374hp/382tq at the wheels.

The next day Fred went to work on the install. Once again Vortech has stepped up to the plate and made a Supercharger kit with great directions and seamless install parts.
One of Rob’s favorite parts of the install was when Fred used his ZCG-style to remove a bracket (as per directions) but going one step futher by finding a matching paint code for the yellow engine bay. Fred removed the bracket, sanded, and made it look like it was never there:

The intercooler looked big enough to cool down two Z engines. Once the install was complete we went back on the dyno for some really amazing results: 495hp/457tq at the wheels!

The next day ZCG and Jeff met in person for the first time. “By the way he held on to the passenger door handle as I gave him his first ride in his Boosted ‘Maro I believe he was pleased,” says Rob.

For more info on the supercharger kit click HERE