Many of our clients perform work on their Z cars by themselves, and we love to help when they are ready. Kai N installed a bunch of parts on his 1972 Datsun 240Z and got to the point where he didn’t feel comfortable taking it further. He took his Z to several local shops and was not getting it sorted so he visited Z Car Garage. We got him dialed in by sorting out his Weber carbs, brakes and fuel system. Our ZCG Heat Shield also graces his induction setup.

 

“A while back I installed triple DCOEs, headers and exhaust. I got some professional help to get the car running, but it was not quite right, so I knew my next call would be to ZCG. But before I made the call the pandemic hit, I found myself with a bit more free time and started working on other bits of the car. I ended up working on the cooling system (new radiator, electric fans), fuel system (electric fuel pump), new brakes and suspension.”

 

Z in the Family

Kai shares his Z history:

“The Z belonged to my Uncle Donnie until the late 90’s. He sold the car to our local mechanic. I’ve always wanted a Z and my Dad always reminded me where I could find Uncle Donnie’s old Z if I was ever ready to own one. When I was finally able to acquire my dream car in 2017, I asked the mechanic a few times if he would sell me the car while I was shopping for a Z, but he was on the fence about it. BTW I think he had 2 or 3 Zs at the time. After a few months of me bugging him, a generous offer and my uncle (along with his friends) putting in a few good words on my behalf, he was finally convinced to sell me the car.”

“I will never forget that after I purchased the Z, my Dad told me a story. Before my uncle sold the car to the mechanic; Uncle Donnie had asked my Dad if he wanted the Z. I was a few years from being old enough to drive and the Z could have been my first car. Of course, my Dad declined the offer. I got my Z, it just happened 20ish years (and a lot of $) late.”

 

Mechanical Sorting

  

Kai wanted us to address a list of items and we knocked each one out. Littles things like installing a temperature sensor, replacing motor and transmission mounts, re-wiring his fuel pump and new rack bushings were taken care of. We also sorted out his braking system and nut/bolted the entire suspension followed by a full alignment.

 

The engine bay was cleaned up, drive belt replaced and we sorted the Weber carbs. Kai purchased one of our Z Car Garage Heat Shields and we modified it to work with his throttle cable linkage:

 

More info on our ZCG Heat Shield below:

ZCG Heat Shield

We are excited to offer the Z Car Garage Heat Shield for your triple-carb’d L-series Z car. This is a one-piece 304 stainless unit with laser-etched serial number. Proven on all of our L-series engine builds and dyno testing.

  

This heat shield will fit Mikuni, Weber, Dellorto and Jenvey induction with several intake manifolds like the Harada:

  

Dyno Tuning

 

The triple Webers were dialed in on the dyno. With Rob’s tuning the Z went from running poorly to running well, making 141hp/141tq to the wheels:

 

Listen to that L-Series music on the dyno:

Kai is really happy with the work we performed:

“It’s a completely different car. It still needs work, but I can finally enjoy the car. I didn’t want a track car or a pristine show car, I simply wanted my Z to be something that I could enjoy. ZCG brought the joy. My Z’s journey isn’t done, it will continue to evolve and I’ll be counting on ZCGs help. I approached ZCG without much of a plan. I think Rob and crew formulated and executed the perfect plan for me (and my budget). The car is fun and safe, while having potential for more growth.  I had not driven the car in 2 years, So I’m sure you can imagine how happy I was.”

 

What’s next for Kai’s Z? He’s driven Mrs. Butters, our 1971 shop 240Z and he is returning to ZCG for our ZCG Big Brakes!

“My experience at ZCG has been amazing, I’m pumped for the next step in my car’s journey. ZCG BBK is next for me! Also being at the shop is cool too, there is always something there that blows my mind (like the BRE Z or the IMSA).”

 

Thanks for your support Kai, we are honored to be a part of your Z car journey!

 

Gentry Stein visited Z Car Garage from Chico, CA for dyno tuning on his V1 Nismo 370Z.  We specialize in UPREV and EcuTek Tuning to maximize power gains from individual modifications like intake and exhaust upgrades. Gentry contacted us before searching for the right Nismo Z34 and eventually found this super clean V1, #528:

 

On the dyno, Rob Uprev tuned the Z making great mid-range to redline gains. Peak gains of 9hp/7tq for a total of 322hp/267tq at the wheels:

Gentry is thrilled with the power gains:

“My experience at ZCG was absolutely awesome! Rob’s passion for Z’s can truly be felt while at ZCG. I felt confident knowing my car was in the best possible place it could be to get dyno tuned. Rob even took videos of the car for me while it was on the dyno. The car made great power throughout the whole powerband, and it’s even more of a blast to drive now! The throttle feels alive, and the torque gain is really felt from 4K-6.5k RPM. I’m excited every time I sit in the drivers seat of my Z.”

 

Yo-Yo World Champion

Fun fact: Gentry is the World Champion of Yo-yo. He provides some insight into his desire for a 370Z and career in Yo-yo playing:

“In early 2020 I was specifically looking for a V1 Nismo Z34 in white. I wanted a car that I could daily drive and also take through canyons and coastal roads. I don’t care about a fancy interior with luxurious amenities. I wanted something that looks sexy and is fun to drive, and to me that’s an exact description of this car. Ive driven some other popular cars, but this car feels rewarding on a different level. I love what they did with the body kit of the Nismo too. You know you have the right car when you can’t help but look back at it every time you get out of it.

 

My Z story really starts with my love for Japan. I’ve had the pleasure of visiting Japan 5 times over the last 6 years for work and play, and have developed some incredible friendships that have allowed me to experience Japanese culture and values. I started playing with yoyos when I was 8 years old, which is when I met one of my mentors who is from Japan. From then to now as I’ve turned that passion into a career, much of my success is due to what I learned from that mentor as well as my other connections and experiences in Japan. The month preceding winning my first World Yo-yo Championship was spent training in Nagoya and Tokyo. I experienced the special level of care that goes into everything in Japan, whether it’s design, food, human interaction, work ethic, etc… This has played a major role in inspiring me and helping me develop into the person I am today. This level of care is also felt in their Z cars when looking at and driving them. I have such a respect and appreciation for Japan and their culture, and I feel proud to drive a car that was born from the same place as many of the building blocks to my own life success.

 

As for my goals with the Z, I plan to continue to drive the hell out of it. I’ve put 15,000 miles on the car in my first 10 months of ownership. It’s literally been 15 thousand miles of fun and I’m looking forward to more of that. I’m pretty content with the way the car is setup. The car is riding on KW V3 suspension, has a Wavetrac limited slip differential, polyurethane differential bushings, K&N drop in air filters, Motordyne Shockwave exhaust, and special sauce from the fresh Z Car Garage tune. I also just did a full paint correction and ceramic coat myself to keep the car looking as good as it drives.

Thanks Z car garage for being part of my car’s story!”

 

Follow Gentry on Instagram and check out his instructional videos over on YouTube. When you are ready, you can even purchase a yo-yo at his shop.

 

Contact us for tuning!

Z Car Garage offers the ARC (Advanced Racing Controls) license. This add-on service to the existing UPREV Flash allows you to have adjustable launch control, burnout mode, and flat-foot shifting. This is for cars with manual transmission, VDC/cruise control. Call Rob for more details and to schedule your Z/G tuning appointment.

 

 

Our customer Randy Jaffe’s 1970 Datsun 240Z Safari Tribute is featured on the latest episode of Hoonigan Autofocus with Larry Chen. This Z is based on the original car that won the East African Safari Rallies in 1971 and 1973.  Watch Randy and Larry discuss the foundation for the build and little details that remain faithful to the original. There are many other Nissans and Datsuns in Randy’s collection with more features on the way. Enjoy!

 

 

Stay tuned for a full zcarblog.com feature where we will take a closer look at our work on this cool Z.

LONG LIVE THE Z!

 

 

Vince S called Z Car Garage after he scored this 1973 Datsun 240Z from our friends at Bring a Trailer. After we got the Z up here from SoCal we found that it needed some work for Vince to really Enjoy The Ride. Our Z Car Garage Big-Brakes and Z Car Garage CV Axles along with a full suspension refresh and engine tuning make it just right.

 

Z Destiny

Before we explore the upgrades, let’s take a look at how Vince found his Z car…

“I’m incredibly lucky to own my Z. It was sold new in Decatur, IL on August 10, 1973. The car was supposedly purchased from the 2nd owner who reportedly had it for over 30 years in 2018 by a dealer in Oakland who then sold it to the collector I bought it from. I first saw the car in 2019 parked in my neighbor’s driveway. At the time, I was looking for a 240Z to buy. In high school I had a 1978 280Z that I took to college but it was prone to overheating and I blew a head gasket and didn’t have the money to fix it. I sold it in 1990 and regretted it ever since. So, when I saw a 1973 240Z sitting in that driveway, I knocked on my neighbor’s door and asked if he wanted to sell it.”

“Turns out the Z didn’t belong to him. He was transporting it from Oakland to Carmel and then on to L.A. for a friend who was a collector. The friend already owned two 240Zs (he has one of the 37 Zs that were part of Nissan’s Vintage Restoration Program) and he wanted my Z for it’s a/c components and other bits to complete one of his cars (he later decided it was too good of a car to use for parts). Although I couldn’t buy my Z that day, my neighbor let me go for a quick drive around the block. Fast forward to April 2020 and that very same Z is being auctioned on Bring a Trailer.”

 

  

Chassis and Suspension Upgrades

 

With Vince’s Z finally at the shop we proceeded with upgrades to make it a fantastic, reliable driver. For our clients that are cruising with occasional “spirited” driving we installed our “Stage 1/light street” suspension.  New parts from Techno Toy Tuning included adjustable T/C rods and rear lower control arms. We really appreciate Gabriel and his staff at T3. They make some of the best suspension parts out there for Z cars.

A full front suspension rebuild included new rack bushings, front control arm bushings, ball-joints, tie-rods, new wheel bearings front and rear (OEM genuine Nissan seals/parts), KYB strut inserts, Eibach lowering springs trimmed Macpherson bumps stops for full travel and a ST sway bar set.

   

ZCG Big-Brakes and CV Axles

Brakes: every vintage Z car that we build here gets the ultimate setup: our Z Car Garage Big-Brakes for small wheels.  Everyone that drives our 1971 Series 1 240z shop demo car is sold on our Z Car Garage Big-Brakes  and Z Car Garage CV Axles! Butters has a way of doing this to our customers 🙂 Read below for a brief description of these parts:

     

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with engineers at Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel (and some 14″ wheels) and retaining factory emergency brake lever! A few details below: Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized) Rotors: 280mm x 20.6 with Alum 7075 hats Pads: Stoptech 309 sport street pads Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE. A few closer detail shots of the calipers, rotors and hardware:

  

We removed Vince’s brakes and installed our ZCG Big-Brake kit with a new brake master cylinder from Nissan, rebuilt brake booster and parking brake assembly.

 

New brake master cylinder from Nissan and stock vs Big-Brakes:

  At the rear, the factory drum brakes were replaced with our ZCG Big-Brakes. Factory handbrake functionality IS retained!

 

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 90 CV axle kits on customer cars and we are stoked with all of the positive feedback.

  

Vince has CV Axle set #341. Stock half shafts (L) and ZCG units:

   

ZCG CV axles installed:

 

Panasport Wheels

Complementing the new springs and shocks on Vince’s Z are Panasport wheels! We replaced the stock steel wheels (kept for shows) with 16×7 Panasports and Continental Extreme Contact Sport tires in 225/50/16.

 

 

Twenty years in the waiting, but the Classic Sports Racing Group (CSRG) is returning to Laguna Seca this weekend, June 5-6! They are hosting a (FREE) car corral in the paddock of Laguna Seca with a limited number (30) of parking spots available for your vintage car. This event is not open to the general public, only parking corral participants! To get your car corral parking spot please contact Geoff at CSRG: race.director@csrgweb.org
Get ready for some B-Sedan Racing action!

 

Here is a map of the paddock with car corral parking area and race schedule. You will need to fill out the following form HERE
This info will be provided to Laguna Seca for use on the gate list. NOTE: One driver and one passenger per car, masks on, and no pets please. This is all part of Laguna’s COVID-19 protocols.

 

Z Car Garage will be racing and supporting our clients. Rob Fuller, Kelvin and Tom will be racing their Datsun 510s in Group 9:

 

Rob will also be racing the #49 Mazda Miata in Group 8: