This weekend at Sonoma Raceway (October 4-6) CSRG is hosting the Charity Challenge featuring the John Morton Cup. The race is for Historic B-& C Sedans and includes our hero and legendary driver John Morton. Don’t miss this event it promises to be an epic gathering of vintage Datsun racers! Check out the schedule below, Group 9 is the one to watch for B-Sedan action:
The Historic B & C Sedan Challenge will be joining The John Morton Cup (through CSRG), and it was created by our friends and fellow racers Glenn Chiou and Dave Stone. Check out their site for more info on the series HERE
Z Car Garage Supports Five Datsun 510 Race Cars!
We will be providing race support for the following five Datsun 510s this weekend, enjoy this video preview of them below:
There will be a field of 38 B-sedans with 12 Datsun 510s mixing it up at Sonoma Raceway. John Morton is Grand Marshall and will also be racing a Datsun 510!
#7 Rob Fuller
ZCG owner Rob Fuller will be piloting the #7 Bay Area Datsun Dealers car
#51 John Morton
John Morton will be driving the #51 car owned by Taz Harvey. You might find this 510 familiar as it was built by our friend Troy Ermish and the previous owner was Wayne McAttee! Car is currently being prepped at ZCG!
#80 Howard Swig
Howard Swig is driving the #80 Red Farmer car (also owned by Taz). Swig is an Auction Manager at Bring a Trailer and this 510 was purchased via a BaT back in 2014 (link). Car is currently being prepped at ZCG!
#72 Tom Dockery
Tom Dockery is driving the Ex-Norm Balzer 510. This car made its debut in May and we are excited to share its full story and profile Tom’s journey into racing soon.
#52 Alex McDowell
Alex will be driving the 1967 Bluebird Coupe.
510 Friends!
Many notable Datsun 510 racers will be in the group, gunning for the trophy. We look forward to the challenge!
#33 Glenn Chiou
Glenn will be driving the Ex-Finn/Harris U2.5L Trans-Am ’68 510. This car made its debut in May at the SVRA event at Laguna Seca. Glenn did an admirable job (as always) getting this historically significant 510 back on the racetrack!
#93 Dave Stone
Dave Stone will be driving the #93 Ex-Frellsen 1973 National Champion 510. Dave is fast!
#52 Jim Froula
Race car driver and restoration specialist Jim Froula of Racecraft is running the Ex- Harry Stewart Datsun 510. Can Jim’s large shoe size give him the advantage this time?
Join us at Sonoma Raceway this weekend for the John Morton Trophy race and enjoy some B-sedan action!
Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.
Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.
Nissan/Datsun experience is NOT a requirement, you just need to have passion.
Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.
Z Car Garage prepared and supported many race cars for last year’s Rolex Reunion and this year we are excited to attend once again August 15-18! You can get discounted tickets AND preferred parking through The Z Owners of Northern California (ZONC). They are hosting a Nissan-only parking corral at Weathertech Laguna Seca Raceway and it’s the best way to park and enjoy the event. For more details please see the ZONC press release below.
ZCG cars accepted!
Alex Mcdowell will be racing his 1967 Datsun Bluebird Coupe and 1979 Jim Fitzgerald Datsun 280zx at the RMMR. Re-cap of these two in action from the 2018 event below:
(R) Photo: Mark Hutchinson
Alex raced with notable 510 drivers Troy Ermish (#9), Jim Froula(#52), Dave Stone(#93), Glenn Chiou(#21), Taz Harvey (#51) and Datsun Roadsters Mike Anderson (#38) and Steve Link (#23). Watch this extended in-car video below of Alex piloting the Bluebird. Alex finished the race 12th/50 cars with a best lap of 1:48.1. Lots of action in this one!
Alex’s Datsun 280zx
Alex ran the Jim Fitzgerald 280zx in Group 7B: IMSA GTO, GTU with some wild rotary and Trans Am cars. He was having too much fun in the Bluebird so did run the car in the final race. The Z ran well throughout the Pre-Reunion and qualifying where Alex was running 1:44s. Here is a short video of the Z in action:
Datsun and Nissan Revisit IMSA at 2019 RMMR By Ann Devor
Following on the heels of last year’s fantastic Rolex Monterey Motorsports Reunion, twelve Datsuns and Nissans have been chosen to compete in three races in 2019’s RMMR at WeatherTech Laguna Seca Raceway. The 2019 RMMR is celebrating IMSA and will feature three classes of IMSA racecars over the four-day weekend from August 15 through August 18. David Martin’s 240Z, Alex McDowell’s 280ZX and Rob Morgan’s 280ZX will be racing on Saturday August 17 in Race 5A (1973-1981 IMSA, GT, GTX class). Almost equally exciting will be the IMSA prototype Race 7A on Saturday where you will see advanced racing performance and styling not seen in the production-based cars.
On Sunday in Race 6B (1981-1991 IMSA GTO/GTU racecars), Craig Bennett will drive a 1991 300ZX competing against John Murray in a 1989 Nissan 240SX, Philip Mendelovitz in a 1989 240SX and Michael Parsons in his 1990 300ZX. We’ll also see Datsun roadsters on Sunday in non-IMSA Race 5B featuring 1961-1966 GT cars under 2500cc including Alex McDowell’s 1967 Bluebird, Phillip Mendelovitz’ 1967 311 Roadster, Ross Merrill in his 1966 Fairlady Roadster and Steve Smargiasso in a 1966 Datsun 311 Roadster.
Here’s what we have planned so far exclusively for Datsun and Nissan fans:
We have a private corral with 20 reserved paved parking spaces. Datsun-Nissan race fans who wish to park in our Datsun-Nissan special parking area must purchase theircorral passes and admission tickets only from ZONC. If we sell out our 20 corral spaces we will try to get more, but there is no guarantee. Corral passes ($45) are good for the entire 4-day weekend.
ZONC is again offering a discount on admission tickets.
Individual Ticket Pricing
Regular Price
ZONC Discounted Price
4-Day (Thurs/Fri/Sat/Sun)
$170
$145
3-Day (Fri/Sat/Sun)
$150
$130
2-Day (Sat/Sun)
$120
$105
Thursday only
$ 40
$ 35
Friday only
$ 70
$ 60
Saturday only
$100
$ 85
Sunday only
$ 70
$ 60
For more information or to be added to our special mailing list for updated information, please contact me at anndevor@gmail.com. Don’t hesitate, don’t be late, and get ready to have a great time at the 2019 RMMR!
At Z Car Garage we love dyno tuning vintage race cars that are being brought back to life in addition to event veterans. Stan T came up from Socal on referral from fellow racer Steve Link to get his Datsun 1200 back on the race track.
The Datsun 1200
A few words on the 1200 for the uninitiated, as this small but feisty little Datsun surprised many. The car was Nissan chassis code B110, sold in Japan 1970-1972 and in North America in 1971-1973. Known in the states as a “1200” from its 1.2L engine size and referred to as “Datsun Sunny 1200” in Japan, The 1200 had a rich racing history with success both here and abroad with much of it prowess coming from a lightweight chassis and potent A12 powerplant.
Stan bought his Datsun about 10 years ago as a barn find, tired SCCA H Production racecar. The SCCA logbook that came with the car showed only two races ever entered. It was mostly stock, with a bolt-in Autopower roll cage. Stan tells us about his build and desire to build it with period parts wherever possible:
“Back in the day, one could literally build a Datsun 1200 racecar out of the pages of the Datsun Competition parts catalog. Everything from engines to gearboxes to LSD rear ends was available. Factory teams and independents flocked to the Datsun nameplate, using the available go-fast bits and pieces. My thought with this project was to build up a tribute car in the vein of the original SCCA C Sedan class cars from the 70s, using parts from the Datsun Competition catalog as much as possible. No later, larger engine. No bigger rear axle. Everything was to be as close to period as possible, everything was to be restored with an eye towards authenticity and durability. No Tilton or Wilwood braking systems…I re-fabricated the braking system using historical pictures as a reference.”
“I’ve searched for several years gathering bits here and there from around the world. It was a tedious process – racers naturally use up parts, parts which were not plentiful to start with, and the stockpiles of available pieces had grown smaller over the years. The F5C56A close ratio 5-speed transmission came from New Zealand. A quick shifter and some engine parts came from Japan. Reproduction tail lamp housing gaskets came from a fellow 1200 enthusiast in the Pacific Northwest.”
What about that cool two-piece rocker cover?
“The one-off alloy rocker cover was CNC milled by a genius 1200 owner who took pity on my plea for a two piece unit that would make valve clearance adjustments considerably easier in the pits and back at the shop.”
Race prep advice came from retired 1200 racers who provided a treasure trove of knowledge. The engine was built by master machinist John Edwards in Costa Mesa who, when he was an automotive shop teacher, persuaded Nissan to donate dozens of the A12 engines to the school district for training purposes.
“This engine is an old SCCA warhorse that was run for years in the San Francisco region. The engine features a ported GX head and a slew of NLA Nismo bits along with trick “modern” pieces like ARP head studs & rod bolts and B-Projects rocker arm collars. It is being resurrected for vintage racing, using a bit more moderate state of tune for longevity and reliability. (if 12.8:1 compression can be called “moderate”)”
Below is a video showing Stan’s A12 motor on the R&D SimTester. It has a variable speed electric motor connected to the flywheel end of the crankshaft, spinning the motor. An oil line connected to the inlet side of the oil pump pressure feeds clean oil to the engine. The tester allows a ‘clean room’ run in of the freshly built engine to bed all the assemblies in, check for oil leaks, find weak/stripped bolts, ascertain clearances of rotating bits at various speeds etc. without generating heat and racket:
Stan adds the final steps of his build before dyno tuning:
“Final assembly and fabrication was done by Vinny Torres at Steve Link Racing in Anaheim. While the parts chase was going on, I stripped the body down to a bare shell and had it soda blasted back to bare metal, then repainted it the way it was when I bought it. During that phase, heavy rust was discovered in the cowl area which demanded attention, and after the heavy undercoating was stripped off, it was found out that the front clip of the car had been replaced at some point in an amateurish fashion, requiring a trip to the body shop alignment table to tug things back into some semblance of square.”
Dyno Tuning
With the car on the dyno Rob and Josh went to work checking things over in the engine bay. They set the timing correctly, worked on the A/F ratio and fixed a few items in the engine bay.
The car made fantastic power screaming to 8500rpm:
It was a win/win and Stan was more than pleased:
“1st dyno run (blue) showing how poorly the engine ran when I brought it in, then the last dyno run (red) showing the Helen Keller Miracle Worker version, where at the end of that run we all high-fived each other and shouted “Done!” Watching Rob & Josh work together was like watching a couple of master musicians in a recording studio bouncing musical ideas off of each other, with each building on the other’s talents until all of a sudden everything clicks, and a hit is born. They make it seem almost effortless until one steps back and realizes the personal database of tuning knowledge they have has been amassed through thousands and thousands of dyno runs and hundreds of days at the track all feeding back on each other. All the while I stood there awestruck, just happy not to get in the way and to learn a few things while watching the masters at work.”
Thank you Stan for bringing your 1200 to ZCG. We look forward to your next race!
Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.
Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.
Nissan/Datsun experience is NOT a requirement, you just need to have passion.
Interested or know someone who might be a good fit? Please contact rob@zcargarage.com or call us at (408)452-0350.
