Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team with two open positions available. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.
Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.
Nissan/Datsun experience is NOT a requirement, you just need to have passion.
Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.
Mike R acquired this gunmetal (KH2) 1991 Skyline GTR last August from our friend Sean and his team at Toprank International Vehicle Importers. It goes without saying, if you are in the market for a vintage Skyline (or any JDM car) IVI is the place to go.
Z Car Garage is familiar with the Norcal Skylines group and fellow Skyline R32 owner Kurt W. referred Mike to us in addition to an endorsement from Top Rank:
“One of my main concerns in purchasing a 25+ year old vehicle that was never manufactured in the US, was support. Who can work on this thing to perform maintenance and upgrades? I spoke with Top rank about it quite a bit prior to purchase and they had recommended Z Car garage. The car was in great condition and mostly stock when I got it. With the goal of being an all around fast street car, I started acquiring parts and placed a call to ZCG to start the first round of upgrades.”
Chassis
We discussed installing a big-brake kit, suspension, Haltech and a few others issues we handled for Mike. Here is the Project Mu 4-wheel big-brake kit:
We also installed the Ohlins DFV coil-overs, shown below are the stock R32 calipers:
With a few modifications the Project Mu kit was installed:
Some close-ups of the Project Mu setup:
We adjusted his coil-over setup and set the ride height followed by corner-weighting the car according to his weight. Further suspension mods included Whiteline Sway bars, Cusco strut bracing and SPL titanium HICAS eliminator kit. All interior panels were trimmed for a clean finish with full alignment services.
Performance
Mike was also interested in replacing the factory ECU so we upgraded to a Haltech Elite 2000 with the R32-plugin adapter. The full installation also included a wideband controller and smoke-testing the car in preparation for dyno tuning:
Greddy FMIC:
The Haltech combined with Apexi intakes, Nismo downpipe, Tomei Titanium exhaust, Greddy FMIC and PRP R35 Coil kit, netted 340hp/284tq at the wheels with Rob’s tuning on 91 octane:
Enjoy the dyno video below:
Since his last visit, Mike has added R34 GT-R Seats, and a sweet set of Volk Racing TE37 SL custom gloss black wheels (18×10.5 +15), wrapped in Michelin PS4S tires measuring 265/35/18.
Mike also relocated the battery to the trunk to make space for a Leaskspec radiator overflow tank and Radium dual catch can setup:
In addition, a Haltech IC7 digital dash was added to monitor vital engine parameters. The IC7 dash ties into the CAN box of Elite system:
More Power
Mike has been happy with the upgrades we made but like many of us the desire for more power inevitably hits:
“The car has been running flawlessly and the goal with these mods is to support the addition of a single turbo kit that Zcar will be installing this August. The turbo kit consists of a Full Race Twin scroll T4 manifold that will be mated to an EFR 8474 turbocharger. Twin Tial 44mm external wastegates will bleed off the excess exhaust gasses.”
Along with the turbo kit, we will be adding: PWR radiator, Samco radiator hoses, Tomei Type B Poncams, fuel pump, Radium fuel rail, fpr, ID 1050X fuel injectors, along with a custom intake and custom intercooler piping with a Tial q50 BOV. The goal for this round of upgrades is 500whp on low boost and 91 octane fuel.
“All of the work performed at Zcar had exceeded my expectations so far (and I’m very picky). Looking forward to the start the build and make some power of the next few months.”
We really enjoy taking care of many Norcal Skyline owners. Welcome to ZCG family Mike and thanks for trusting us with your R32! Enjoy The Boost until you return!
More pictures in the gallery below:
Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.
Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.
Nissan/Datsun experience is NOT a requirement, you just need to have passion.
Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.
We love to see our products being installed and used on customer cars. Datsun enthusiast Pat S is running our Z Car Garage CV Axles in his 550whp RB26-powered Nissan Skyline 2000 GT-X.
Pat installed our CV Axles himself on his 1973 Kenmeri Skyline and reports that it went smoothly. Here are a few pictures he sent us:
We were stoked to hear Pat report the improvement over his standard half shafts:
“Testing out my new axles from Z Car Garage…no more clunking, no more vibrations, just smooth as glass. Strong as hell too”
Here is the video of Pat “testing” out the new CV Axles, enjoy!
Pat is also a member of the Wild Cards, a group of enthusiasts based in Southern California. You may have seen their crew featured on the Hoonigans:
As if the Rb26 wasn’t enough, the extremely rare Riverside Super River wheels re-finished by Izanami captivated us:
Here is a fun fact about Pat: we were both participants at the All-Datsun Meet at Mt. Shasta back in in 2004! This 3-day event featured a full track day at Thunderhill Raceway before heading up North. Pat drove his SR20DET-powered Datsun 510 (blue, front row):
We enjoy helping Z cars owners get their cars in top shape to Enjoy The Ride. David P purchased this 1975 Datsun 280z on the East Coast and the exotic shop it was at had difficulty with it. David moves between San Francisco and Massachusetts and wanted us to sort his Z out before hitting the roads here. Our Z Car Garage Big-Brakes and Z Car Garage CV Axles along with tuning and aesthetic upgrades transform this Z.
Affectionately called “Triple Six”, the Z arrived at our shop from the East Coast via Masney Auto Transport (Thanks David). David had not seen the Z in person yet since purchasing and it needed some attention, Z Car Garage style.
The car was not running upon arrival and Rob had many suggestions after the initial assessment. From David:
“When Rob called to tell me that my car had made it there I said ‘Ok great. Can I tell you what I want done?’ to which Rob replied ‘Nope’. He said ‘I want you to come down here, drive my car and then say to me, OK I want you to do to my car whatever it was that you did to yours’, and after driving his car I did say those exact words.”
ZCG Big-Brakes and CV Axles
Indeed, we had David test drive “Mrs. Butters”, our 1971 Series 1 240z shop demo car with full suspension and our ZCG Big-Brakes:
“I drove Rob’s unassuming, Safari Gold 240Z, that he appropriately named Butters, and God damn was it fun! I was surprised when he told me it had 275 horsepower, not a small number for a car that’s so small and light, its just that it felt much more powerful than I ever thought a sub 300 hp car could feel.”
After the test drive he was sold on our Z Car Garage Big-Brakes and Z Car Garage CV Axles! Butters has a way of doing this to our customers 🙂 Read below for a brief description of these parts:
As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with engineers at Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel (and some 14″ wheels) and retaining factory emergency brake lever! A few details below:
Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)
Rotors: 280mm x 20.6 with Alum 7075 hats
Pads: Stoptech 309 sport street pads
Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.
A few closer detail shots of the calipers, rotors and hardware:
We removed David’s brakes and installed our ZCG Big-Brake kit. Up front:
Our Big-Brakes utilize the OEM brake master cylinder and booster along with the factory hydraulic system. We installed a new master cylinder for David and fixed the wheel/hub area:
At the rear, the aftermarket disc setup was replaced with our ZCG Big-Brakes:
Factory handbrake functionality IS retained! A few close-ups of the front and rear setup:
Panasport Wheels
Complementing the new brakes on David’s Z are Panasport wheels! We replaced the generic aftermarket wheels with 16×7 Panasports and Bridegstone S007a tires in 225/50/16.
The new brakes fit nicely behind the new Panasports: We dialed in the spring set on the coil-overs and adjusted them for the best ride quality.
Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 100 CV axle kits on customer cars and we are stoked with all of the positive feedback.
David received axle set #324. Stock half shafts (L) and ZCG units shown below with more pictures in the gallery:
Details
To ensure that David could pick up his Z from us and start Enjoying The Ride immediately, we performed clean-up work on the interior and sorted the turn signals and headlights. Aesthetically he wanted to change a few things like the front end. We installed a Euro front bumper with Josh fabricating some brackets to make this 280Z look great:
David was blown away by the suspension and braking upgrades:
“I was completely convinced that Rob was not only the right one, but probably the only one that could bring my 1975 280Z up to its fullest potential. I say the only one because of the custom built Z car garage suspension and brakes that Rob uses. We agreed on a comprehensive upgrade to my Z that would be completed in two stages. The first stage was completed this past March. The 45 year old suspension was, to say the least, upgraded. Because Rob believes in a holistic approach, the suspension work also included the proper brakes, wheels and tires. All of the components were specifically chosen to work together in order to produce a car that handles phenomenally and almost unbelievably well.”
Engine
The triple-Weber L28 simply received an ignition timing set, making 161hp/160tq at the wheels:
Enjoy this dyno video below with sweet L-series music:
Part Two
David reports that his Z went from junk to handling better than a 911. Here he is (above) Enjoying The Ride on Skyline near Alice’s Restaurant. What’s next for Triple Six? Full engine upgrade!
“The second stage, that we will be starting soon, will be the engine work. The goal is to get 300hp out of the old in-line six. Rob’s love the cars that he works on is evident in the quality of his builds. A true craftsman in every sense of the word.”
We look forward to working with you David, LONG LIVE THE Z!
