It really makes our day to see a client still enjoying their Z years later after visiting Z Car Garage. Last weekend we saw Michael D’s 1972 Datsun 240Z at the 34th Annual Z Car Convention (ZCON) in Colorado Springs, and it reminded us how we’ve worked with him since 2007. Let’s take a closer look at this Nissan RB25DET-powered S30 featuring our Z Car Garage Big-Brakes, Z Car Garage CV Axles, full suspension and Panasport C8 wheels.

Photo: Bryan Delohery

 

Go Green Inspiration

 

In 2005, Rob Fuller performed an RB25DET engine swap into his 1970 240Z, affectionately named Go Georgia Z (GO GA Z = Go Green Georgia Z). The RB is a turbocharged inline-6 engine from the Nissan Skyline (R33) GTS-T in Japan, requiring new drivetrain mounts and supporting modifications to work in the S30 chassis. Once completed, Rob drove his Z all over California, attending several long distance car shows like Motorsport Auto in SoCal and the All-Datsun Meet at Mt. Shasta.

 

 

Rob’s RB-swapped Go Green Z gained notoriety and around 2007 is where our relationship with Michael began. He wanted ZCG to do an RB25DET swap similar to Rob’s in to his super clean ’72 240Z:

Photo: Bryan Delohery

 

As we know it’s always been tough to keep up with demand at ZCG. Mike is a great guy and kept offering us his business but Rob wasn’t ready to take on the project. Instead, we focused on preparing his car to handle the RB swap. Driveline upgrades included a ZCG-prepped 4.38 R180 LSD (since replaced with R200 3.55 Quaife LSD), restored hydraulic/brake lines and our ZCG Big-Brakes and CV Axles.

 

After the RB swap was completed in 2013 at another shop, Michael returned to Z Car Garage to sort a few more items. We did not like how the fuel system wasso it was redone by us. We also sold him our custom ZCG (Z31) motor mounts and tunnel bracket reposition for the OEM RB25 OEM transmission.

 

A few specs on Michael’s current setup: RB25DET rebuilt with RB26/Neo/N1 parts, BorgWarner EFR 7670 turbo, GTR coil set, Bocsh 1000cc injectors, TIAL 50mm BOV, McKinney Pan and Radiator, Wiring Specialites Harness and a LINK Ngtr+ EMS. With 525whp/480ft-lbs, the suspension and brakes were upgraded. We installed a full Ground Control coil-over suspension (remember this was in 2008) and Michael reports great performance still:

“In regards to the performance of the suspension upgrades, coil-overs, Tokico struts/shocks I was considering T3 and Arizona Z control arm suspension replacements. My suspension performs so well with the stock A-frames etc that it didn’t make any sense to change them. I would add, without spoilers my 240z stays very grounded at 130 mph and I know what I am talking about after having owned a ’14 R35 GTR for 7 years.”

 

Z Car Garage Big-Brakes and CV Axles

 

To cope with the power of the RB25DET, Michael has our ZCG Big-Brake kit. Not to be confused with our current Z Car Garage Big-Brakes (for small wheels), this Big-Brake kit was our initial setup from over a decade ago. This 328mm sized kit requires 17″ diameter wheels and the massive ST-42 calipers are finished in bright red. We actually did all the R&D in-house for this setup…using a 280ZX master cylinder and our own mounting brackets.

 

Since it was in its infancy we did not market or sell this BBK to the public, installing it only our clients vehicles. There are about 20 sets of these early, 328mm BBKs on client Z cars like James’ Turbocharged L-Series 240Z, Scott’s 260z, Gary’s Datsunworks-Powered 240Z and Lou’s RHD FairladyZ:

 

Panasport Wheels

 

Michael also got a set of our custom Panasport Racing C8 wheels. These 3 piece, 17×9 wheels allowed fitment of a 255/40/17 tire under stock fender flares.

 

When ZCG was starting to build a series of RB-powered S30s, Rob brought in a pallet of C8 wheels destined for the builds. Michael wanted a set so we hooked him up with a silver spoke finish. They look great on his Z:

 

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 130 CV axle kits on customer cars and we are stoked with all of the positive feedback.

  

We built Michael a set of CV Axles, shown below:

 

Interior

 

Michael is proud of the interior on the Z, keeping it aesthetically close to stock with updated materials and comfort in mind. A Restomod A/C unit keeps things cool. A very special thanks to Luis at Vargas Auto Upholstery:

“Sewed in centers of original seats, Auto Meter digital speedo and tach to modified to look original in original housings, the dash which is impossible was done with requirement to minimize stitches and never cross a stitch, stereo housing was built to match the faceplate of original, has remote electric windows and locks, power steering, hands free phone, android auto for maps, and seats that hold you in while providing comfort for 8+ hour drives.”

  

Enjoying the Ride

 

Michael contacted Rob in 2003, just after he purchased his 60k-orignal mile 1972 Z to get the upgrades started. He’s driven it since 2004. Here is what it looked like when he picked it up, and a current photo:

Michael’s goal for the build, aptly named “TRBUTEZ”…

“It is called TRBUTEZ.: A tribute (act, statement, or gift that is intended to show gratitude, respect, or admiration) to the many under $3k  starving student Z’s I owned that carried me through life with unconditional loyalty, performance, and dependable reliability. This one is for you. Thank you!  My goal is to upgrade the build of the car for an even better personal experience while maintaining the respect this car deserves through preservation of every original detail possible.”

 

We were stoked to see Michael and his Z at the ZCON event on Colorado Springs. After all these years he’s still Enjoying The Ride!

 

When you think it couldn’t get better…he won (4) awards!

Thank you to ZCON organizer Christopher Karl and Meghan Fuller for the show photos! More in the gallery below.

 

 

…[read more]

 

Road & Track magazine just published an article about the Datsunworks KN20 cylinder head! You can view it HERE. It is a great read with interviews from founder Datsunworks founder Derek Minetti and Z Car Garage owner Rob Fuller:

 

The article provides origins of KN20 as we as technical information. Z Car Garage is excited to collaborate with Datsunworks as we build and test more KN20-powered Z cars. To see and hear the KN20 in action visit our previous post HERE

 

  

 

On Sunday 6/13 we attended the Morning Motors Cars & Coffee event hosted by DrivingWhileAwesome (DWA) in Santa Cruz, CA. The event impressed us again with a fun vibe and superb variety of cars. One of the many perks of DWA Morning Motors is its location surrounded by the best driving roads. This morning however, I ran solo in my Datsun Roadster straight to the venue in front of the Old Wrigley Building.

 

It’s smart to arrive before 8:30am to grab a shaded parking spot and coffee/donuts (thanks DWA!) before they run out. The event is so close to downtown Santa Cruz and HWY 1 I invited my family to enjoy the cars and visit our favorite beach afterwards.

 

Mandatory Nissan/Datsun

I was happy to see so many Nissans and Datsuns at Morning Motors.

 

There were a three Datsun 510 wagons and one 510 2-door! This is Mark G’s 510, a client we’ve been lucky to work with, you can see more details about his Dime HERE

 

 

Our very own Nick F. in his 1972 510 wagon on SSR wheels:

 

Ray’s Hakosuka Skyline, now sporting  our Z Car Garage CV Axles! We look forward to seeing Ray for more upgrades on this already stunning Skyline that gets driven everywhere:

 

Pall’s R32 Skyline in (AH3) Pearl Red. Pall K acquired this Pearl Red (AH3) R32 from our friend Sean and his team at Toprank International Vehicle Importers. We love the gorgeous paint color and Volk TE37SLs. He is also a ZCG client!

 

Todd’s R32 Skyline GTS-T. I just saw him on the Breakfast Club Rally yesterday!

 

Another ZCG client, Eric’s Infiniti FX35 sporting upgraded suspension and R35 GT-R wheels.

 

350Z and G37 sedan on Z34 wheels:

 

I counted five (!) Nissan 240SX in both S13 and S14 trim. This S13 was my favorite:

 

 

S14 with “Silvia” badging:

 

Lone Z32 (NA), Q45 and a bagged Q60:

   

In Search of J-Tin

Morning Motors did not disappoint if you are Japanese Classic fans. Honda S800:

  

NA Miatas!

  

 

EG Civic, EM1 Civic Si and S2000 CR:

  

90’s icons…Supra and NSX and FD RX-7 (on FIKSE wheels)!

   

So much variety! Enjoy this short video:

Euro Classics

Yearning for Porsche’s? Or something a bit less “mainstream”? DWA CnC did not disappoint. Rosso Dino 246:

 

308, 4C and Chris’ “Rat Alfa” GTV:

 

Spotted my first, local Porsche 911 by Singer. It was impressive with so many details to enjoy:

 

 

Sweet 993 C2S with sexy multi-piece Turbo Twists:

 

 

Naveed’s new 964 911 GT3 RS (991)

  

A trio of cool BMW 2002s, one powered by an M20 6-cylinder!:

  

American Muscle

From 60’s to 80’s. Mike Garret’s familiar purple Mopar with late-model drivetrain and really wild Plymouth Fury race car tribute:

 

Eclectic

  

DWA CnC is definitely my kind of cars and coffee. It’s a great venue with amazing driving roads nearby and the cars were so diverse. We highly recommend checking it out! Thanks to the DWA crew for hosting. If you haven’t already, listen to their podcast and make sure you give them a follow on Instagram.
More pictures in the gallery below!

 

…[read more]

 

Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team with two open positions available. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.

Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.

Nissan/Datsun experience is NOT a requirement, you just need to have passion.

Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.

 

  

 

 

 

This 1971 Nissan Skyline has been in the Z Car Garage family for several years and currently resides in Georgia with owner Randy Jaffe. Randy has built a few notable cars with ZCG including the Rocketbunny Series1 240Z and #46 BRE Datsun 240Z driven by John Morton:

How did he end up with this JDM beauty? Randy has always loved the stance and looks of these early, “Hakosuka” Skylines and wanted to experience right-hand drive (RHD). Timing was perfect as our customer Alex McDowell was willing to part with his 2000 GT-X:

 

Under Alex’s ownership ZCG maintained the car for many years. It did not need much to prepare for delivery to Randy. We performed a full tune-up, sync’d the triple carbs, changed the fluids, handled minor cosmetics (like straightening the bumper) and it was shipped off to Georgia:

 

Randy’s Way

 

If there is one thing about Randy we admire, it’s his attention to detail. Ok, we like his sense of style too 🙂 Upon arrival he mounted fresh set of chunky Toyo tires on those iconic Watanabe wheels. Inside, he removed the carpet and replaced it with original style GT-R vinyl covering. The tan seats were reupholstered to red.

 

The car was originally a white GT-X and when I asked Randy of any future mods he replied:

“I am thinking about dropping one of the Parkinson race motors in it to give the car more power – the original 2.0 is sluggish compared to what I enjoy driving. If I do that I will pull all of the A/C parts off of it and clean up the engine bay. To be continued!”

Randy applied the Hakosuka racecar-inspired livery:

 

Here is a walk-around of the Hako, with more pictures in the gallery below.

 

We are happy to report that Randy is Enjoying The Ride and even won an award at the local Caffeine and Octane show:

 

More to Come

 

You may have noticed some really cool cars in the background. Randy has several Nissans/Datsuns in his collection that we are excited to share with you in upcoming blog posts! For now, LONG LIVE THE HAKOSUKA!

 

…[read more]