On Saturday, September 24 we attended the Tokyo Calling 2 event hosted by Breakfast Club Rally. Z Car Garage participated with a group of client cars and enjoyed a wonderful day of driving through the foothills of Northern California. The event also featured 200 Japanese classics and 90’s-era wonders to appreciate during the morning social gathering and rest stops. Enjoy our report with mega-photo gallery and video!

  

Breakfast Club Rally

 

The Breakfast Club Rally (BCR) started just over 2 years ago. What started out as a small group enjoying weekend drives blossomed into a full-on Cars and Coffee (still unofficial) meet just before rally participants head out according to run group. The monthly BCR is always free/open to all makes and I highly recommend it for anyone looking to enjoy the beautiful Northern California roads and scenery. You can see my previous BCR reports HERE!

 

The initial BCR Tokyo Calling event held back in March was a success. We did not want to miss this all-Japanese, mostly-vintage rally so I assembled a group of Z Car Garage clients and friends to participate in TC2. We left the shop at 6:30am heading to San Rafael, here is a preview of our cars:

 

Gary’s 1971 Datsun 240Z

Rob Fuller drove our client Gary’s S30 with the Datsunworks KN20 twincam cylinder head. Supporting the 3.1L engine are our Z Car Garage Big-Brakes, Z Car Garage CV Axles, Jenvey ITB EFI with Haltech Elite management, Nissan 6-speed CD009s transmission and OS Giken 4.11 LSD.

 

While ZCG has performed many tests with the KN20 engine this was the first time we were able to do a 300-mile trip and really wring its neck. It just keeps getting better and better…watch the video below and turn those speakers up!

Datsunworks in action

Vince’s 1973 Datsun 240Z

 

Vince’s 1973 Datsun 240z is Enjoying The Ride with our Z Car Garage Big-Brakes (for small wheels) and Z Car Garage CV Axles.  He scored this Z from our friends at Bring a Trailer and regularly drives on rally events.

Mrs. Butters

 

Leading the caravan was yours truly in Mrs. Butters, our Series 1 shop 240z. This Series 1 S30 features a 3.2L with triple-Mikuni induction, Z Car Garage Big-Brakes, Z Car Garage CV Axles, ZCG Heat Shield, 6-speed transmission and full KW suspension (releasing soon).

Jim’s 1971 Datsun 240Z

 

Jim’s 1971 Datsun 240z is now sporting a Rebello 3.2L with triple-Mikuni carbs on a Harada intake, Recaro Specialist seats, CD009a 6-speed transmission, our Z Car Garage Big-Brakes (for small wheels) and Z Car Garage CV Axles!

 

Linda’s 1972 Datsun 240Z

Linda Williams drove her 1972 Datsun 240Z OMS Pace Car Duplicate. Z Car Garage revived this historically-significant Z from its slumber to make it a nice driver for Linda while retaining its survivor status. She loves driving it everywhere.

 

Henry’s supercharged Nissan 370Z

Henry drove his Stillen-supercharged 370Z. This was his first time attending a vintage rally and he had a blast! Henry recently visited ZCG for a re-tune and upgrades, making even more power stay tuned for an update! Rolling photo by Gregory Veizades:

  

Mr. C, a 1970 Datsun 240Z

Our guest Herbert P piloted  “Mr. C”, our stock, one-owner Series 1 Z. We put some 14″ Panasports on this time as the stock hubcaps have a habit of coming off during spirited driving!

 

Our morning caravan of cars enjoyed cruising up I-280 through the Golden Gate Bridge. Nothing beats driving with fellow Z car owners!

 

Tokyo is Calling before the Rally!

 

Our crew arrived at the rally start in San Rafael and it was already filled with fabulous J-Tin. BCR hosted a “social gathering” from 8-9am (usually 1 hr) so we could take in all the glorious cars. The vibe was tremendous, and as usual it went by too quickly. Let’s go through some of the highlights, with more photos in the gallery below!

 

Tom K’s Nissan Fairlady Z432 stunned the crowd. This rare, RHD gem is powered by the unicorn-status S20 engine:

 

I am always on the lookout for Nissans and Datsuns, and roadsters always get my attention. There were at least 8 in attendance including two genuine 1967 2000s. One of the most sought after Datsuns, these “half-year” models were introduced mid-1967 offering a 5-speed transmission and 150hp twin-Mikuni carb’d 2L engine…hot stuff for the era.

Ian’s SRL is #601 (out of ~1000 cars) and it was fully restored years ago by Les Cannaday in San Diego. Ian is meticulous about maintaining this car, but it is no garage queen. The (655) Off-white paint with red interior is one of my favorites. Yes, it even sports a factory Nissan hardtop with all the stainless trim!

 

Our client Erik drove his hot-rod R16 stroker-powered ’70. We dyno tuned this little beast recently, check it out HERE:

  

There were handful of Datsun 510s in wagon and sedan form. Our client Jay installed a set of our Z Car Garage CV Axles on his Green 510. Jay is a hardcore rally driver (just completing the Faultline 500) and also brought his mint wagon with family! Check out his sweet set of Devil Shadow wheels:

   

Our very own Nick F drove his 510 wagon and went full rally-style with intercoms:

 

Back to Z cars, and with many cool examples like this pair of S30s with classy Campagnolo and 432s-style wheels:

 

Our client Kevin’s Slicktop Z32 on WORK XD9 wheels and Stoptech brakes. A pair of clean Zenki Z31 300ZX, one LS-powered:

 

Leo’s Nissan Pulsar GTi-R

 

We were pleasantly surprised to see Leo and his Nissan Pulsar GTi-R at Tokyo Calling 2. This RHD, JDM hot-hatch is known as “Baby Godzilla”, sporting all-wheel drive and an SR20DET drivetrain. What’s wild is that this Pulsar used to be owned by our very own Gary at Z Car Garage! Leo purchased it back in 2017 and drove it all the way from Reno, NV.

 

Leo is an avid Pulsar fan having owned several and he really kept this one in pristine condition. He added a few upgrades including Stoptech Big-Brakes. He ven kept the Z Car Garage license plate frame!

 

A pair of S13 240SXs:

 

It was great to see our R32 Skyline clients Mike’s R32 (TE37 wheels), Miles (Rays wheels) and Kurt W. (in his GC8 Subaru) and . All will be getting zcarblog udpates:

 

So many cool cars please check the gallery for more photos! Next, let’s check out some non-Nissan/Datsun action…

Kei Classics

Autozam AZ-1 and Suzuki Cappuchino mesmerizing the crowd with their size and neat features:

 

Honda

 
Honda was well-represented including late model DC2 Integras and S2000s. A few NSXs, CRXs and EF/EG hatches rounded out the display:

Toyota

 

Supra (A60 and A80) and even first gen MR2s, turbocharged Beams-powered Celica and AE86s!

    

Enjoy this walk-around of the pre-rally social hour at Tokyo Calling 2:

 

Trucks and Vans

Let’s not forget the Japanese classic trucks and vans!

 

The wildest car I found was this Nissan Leaf with motorcycle engine:

 

Rally On!

The rally started at 9am and I was tasked with leading our group. There was no cell phone reception but I was armed with a turn-by-turn rallye printout. I enjoyed hustling Mrs. Butters through the backroads:

 

One of the perks of BCR events is their team of professional photographers at various stages capturing epic rolling and detail shots so people can focus on enjoying the drive. I encourage you to visit each of these photographer’s photo albums to see shots of your rides: Alex Nibyt, Gregory Veizades, Everett Lederer, and Zack Hubbell.

   

Arriving at Point Reyes was another opportunity to see cars I missed at the starting point. Folks took a snack/coffee break here in the quaint town. I was just admiring each vintage ride cruise by…like this Nissan Figaro!

 

Henry’s 370Z and an FD RX-7

  

After chatting we resumed the rally. This final stage was my favorite with winding roads going through Petaluma. This is where the KW Suspension, ZCG Big-Brakes and 6-speed transmission in Mrs. Butters really shine. Every gear shift, squeeze of the throttle and confidence of the brakes makes for a sublime driving experience.

   

The rally concluded in Tomales. Total mileage for our San Jose crew thus far was 200 miles. BCR arranged for lunch at William Tell House as their clever motto is #DoneByNoon. The intersection here was yet another car show with J-Tin everywhere. It was a superb venue to enjoy cool cars and great company.

  

Our client Kevin’s Slicktop Z32

 

People got a kick out of the Behemoth:

 

Thanks BCR!

 

Many thanks to the organizers, we had a blast and I urge you to register for their next event, especially if you are in the South Bay area like me and want to see what driving bliss lies North.  Here are a few thoughts from Rob re-capping the Tokyo Calling 2 event:

“Loved TC2 and my favorite part is connecting with people, seeing their passion and all the other cool cars…I’m a huge Miata fan and NA/NBs were out in full force. Subaru XT…I really wanted one as a kid. Little fun fact…that rear end bolts into a Datsun 510. The Leaf with motorcycle engine was wild. Great to see our clients also on the drive. Got to see Leo and get reunited with the GTi-R, chat with Mike Young…”

“…Such a proud feeling of driving up 280 through the city and looking over to see Linda Wiliams in the OMS Pace Car, Vince S and Jim and Herb driving Mr.C. and Alex in his Sunny. The amount of community we have is tremendous. Loved how organized BCR is, so well thought out. The last 20+ years of my life I’ve been doing car meets/car adventures…the BCR guys got it down….from the registration stickers to rally directions. Little things like making sure there is enough room for folks at the meetup points…or always having clean restrooms available…these are details between enjoying yourself in a vintage car or not. The roads were incredible and scenery unreal. Sounds of L-series everywhere! Cant wait for next Tokyo Calling.”

 

 

The Drive Home

Our adventure was not over as we had to travel another 100 miles South to the shop. We caravanned back, traveling through the iconic Golden Gate Bridge and through San Francisco. I’m sure traffic had a field day with our group of Datsuns/Nissans:

 At the shop, Rob gave everyone rides in the Datsunworks-powered Behemoth. It was fun to see the permanent smiles on passengers’ faces after returning:

After a full day of driving Mr. C, our stock Series 1 240Z,  we gave Herbert the keys to take Butters out for spin:

    

Thank you to all of the Z Car Garage clients that made the journey with us. Huge thanks to BCR for extending their hospitality to our crew, everyone was thrilled. Here’s to the next rally and always, always #DoitInADatsun!

 

…[read more]

We have the pleasure of continually developing Dirk’s 1973 Datsun 240z to help achieve his vision of a Z car that is adept on the street and track. Improving the driving experience are our Z Car Garage Big-Brakes, Z Car Garage CV Axles, Silvia 6-speed transmission and a host of chassis and driveline upgrades.

 

Dirk shares his experience working with us:

“Collaborating closely with Rob and ZCG has elevated the optimization process. Rob will frequently talk me out of a bad idea, or into a good one (like the OS Giken LSD). Sometimes I talk him into a bad idea and it turns out to work really well, like the S15 gearbox. The most fun is when we brainstorm stuff together like turning the catch can setup into an improvised simple PCV system, eliminating all hints of oil fumes from the car while running.”

Datsun 510, 620 and Z car love

Since our last iteration, Dirk as been back to Z Car Garage for a few major projects. Let’s take a look at his Datsun story first. Dirk bought his first Datsun in 2014, a 1970 510, to learn how to work on cars himself. After learning more about the history of Datsun, and the significance of both the 510 and the 240Z in establishing Japanese cars in the American market, he knew he had to own a Z as well.

  

A year later, the right Z showed up on eBay in Texas, a 1973 in silver gray. After pouring over the photos and talking to the seller, Dirk bought the car sight unseen. The idea was to have a nice Z to enjoy and drive, while continuing to work on the (sometimes not) rolling restoration of his 510. The car was lovingly restored by a dad and his children and in mostly stock condition. Dirk also has Datsun 620 work truck complete with dual-Mikuni’s:

  After many more tweaks, different induction setups, spring rate changes, rebuilt stock brakes, and 24K miles of driving including a few track days, Dirk’s Z was inching closer and closer to his vision.

 Photos: Dito Milian/Gotbluemilk.com 

“After installing a Datsun Spirit STR-3 engine with a set of Nismo Mikuni PHH44 carburetors, the biggest weak spots left were the rest of the drivetrain (especially the stock 4-speed transmission, but the Subaru diff had also developed some bearing issues), the stock brakes, and of course the loose nut behind the wheel – but sadly that last component typically takes too much money and time to modify thoroughly.”

  

After comparing the Z to his Subaru BRZ on the track, it was clear the Z was better at everything except for shifting gears. Since his engine made a healthy amount of torque, but not enough to warrant a CD009 (350z) transmission, Dirk kept looking for alternatives. He also wanted something with slightly closer gear ratios to better suit the engine’s power band. An S15 Silvia 6-speed seemed like the perfect fit and we installed it back in 2019.

S15 6-speed transmission

  

The first S15 box had some weak synchros, so Dirk sourced another one that was installed with OE trans fluid, as well as a set of fresh OE motor and trans mounts to help with shifter feel and reduce vibrations in the car.

“The S15 transmission fit surprisingly well. ZCG built a custom crossmember to locate it, and the shifter lined up almost perfectly. No transmission tunnel mods were necessary. The modern shifter looked out of place, so ZCG built a custom unit that would look stock, and work with the Datsun competition shift knob. A small 6-speed shift pattern sticker modeled after the one used in the Silvia is the only clue there’s something different going on under this car. And of course the driving experience.”

Making the S15 shifter look factory, we are happy with the result and Dirk’s subtle shift pattern sticker:

   

The Datsun Comp shift knob complements the steering wheel:

 

Chassis and Driveline Upgrades

First, there was work to upgrade the steering geometry and suspension. With the car being lowered quite a bit, despite having 1″ RCAs installed, it had a ton of bump steer. Rob installed DP racing adjustable tie rods, removed the front springs, and completely eliminated the bump steer on the alignment rack while moving the suspension through its full range of motion.

New DP Racing tie-rods and in-house alignment:

 

We also refurbished Dirk’s steering rack with fresh parts from our stash:

 

With the Z back in the shop for bodywork we took the opportunity to make more suspension changes. New Koni Race shocks from T3 were installed, which were a much better match for the 300# and 350# spring rates than the Koni Sport shocks they replaced (as Dirk initially ordered the coil overs with lower spring rates, he never replaced the shocks after adjusting the spring rates, and the car always felt underdamped, particularly on the not-adjustable compression stroke):

 

ZCG Big-Brakes and CV Axles

    Dirk visited ZCG and drove “Mrs. Butters”, our 1970 Series 1 240z shop demo car and he was sold on our Z Car Garage Big-Brakes (for small wheels) and Z Car Garage CV Axles! Butters has a way of doing this to our customers 🙂 As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

A few closer detail shots of the calipers, rotors and hardware:

   

We removed Dirk’s stock brakes and installed our ZCG Big-Brake kit.

 ZCG Big-brakes replacing stock setup up front:

   

At the rear, the factory drum brakes were replaced with our ZCG Big-Brakes. Factory handbrake functionality retained!

    Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 70 CV axle kits on customer cars and we are stoked with all of the positive feedback.

  

Also visible on Dirk’s Z are the excellent adjustable lower control arms from Techno Toy Tuning.

  

3 Liter L-Series Power

Unfortunately, the Datsun Spirit engine developed rod knock which was the impetus for a big drivetrain upgrade. Several other parts of the car where refined as well.

 

The L28 engine was pulled, sent to Rebello, and built into a 3L powerhouse. Dave bored out the 44PHH venturis to a custom 38.5mm, to hit the perfect compromise between peak power and drivability. We also installed a fresh water pump, alternator, new fan blade, OEM fan clutch and fresh air filters. The beautiful DP Racing oil pan remained. More photos in the gallery below:

 A custom stainless 2.5″ mandrel-bent exhaust mates with a new set of coated Pacesetter headers and Z Story Street muffler (in a search for a reduction in volume while keeping a nice note). Dirk discusses the clutch/flywheel combo below:

 

“The STR-3 already was able to slip the Exedy clutch and we were never fans of the Chromoly steel flywheel. A Jim Wolf Technologies clutch and flywheel combo was installed after first trying a newly developed Kameari single plate street clutch kit, which we both found too loud and racy for this street car. While the JWT pressure plate yielded a different pedal feel that took some getting used too, it was not too heavy and perfectly comfortable to drive in traffic. More importantly, it never slipped under any kind of abuse.”

The clutch hydraulics were replaced to work with new alumimum flywheel/JWT HD clutch combo:

  

We installed a ZCG-built 4.11 OS Giken limited-slip differential in the R180 along with a custom aluminum driveshaft:

   

Dyno Tuning

 

The previous L28 made 202hp/194tq at the wheels with Rob’s tuning. Now with the fresh 3L it baselined at 245hp/226tq with more area under the curve:

 

Rob tuned the car further on the chassis dyno, setting it up with a very lean idle at Dirk’s request (to minimize gasoline fumes at idle). With A/F optimized and Nismo Mikuni carbs massaged, Rob unlocked another 20hp yielding a stout 265hp/232tq to the wheels:

  

With gains of 62hp/37tq at the wheels over the L28, Dirk is very happy with the new 3L:

“While the Datsun Spirit engine had a very peppy mid-range and made more delicious induction noises, there’s no argument that the more powerful Rebello engine elevated the car to the next level of performance and fun. The entire setup worked incredibly well together, and we hit an impressive 265hp at the rear wheels, or 60hp more than the engine made in its previous iteration, putting it in the 100hp/liter ballpark at the crank. Not bad for a dinosaur engine on California pump gas!”

Enjoy the dyno video and L-series music!

 

Sorting

The little things are what we excel at and Dirk had a list for us to knock out. While at ZCG, we replaced the heavily sandblasted OE windshield, and did some rust remediation in the cowl area, as Dirk had started noticing water making it into the interior fan assembly after washing the car. More photos in the gallery below:

  

The heater and blower motor assembly was refurbished with new ducting seals and lubed linkage:

 

The headlight switch had also developed some issues where sometimes the lights would turn off completely when switching between low and high beam, and was replaced with a good used example from the ZCG parts stash.

“The headlights now worked reliably, the new engine didn’t consume any significant amount of oil, and the whole drivetrain worked together even better than before with the new clutch and flywheel combo.”

 

Unfortunately, 7 months and many miles later, Dirk was back after a minor nighttime crash that took out the left fender, front bumper and valance, and dented the hood. After bodywork and paint from our man William from William’s Auto Body, we installed a euro front bumper, used turn signal assembly, cleaned up electrical wiring from alternator through firewall and sorted his Speedhut GPS speedo box.

  

To improve safety, comfort, and avoid future crashes, Dirk upgraded his headlights to a new set of Holley Retrobrights, and GTR Carbide 2.0 turn signal bulbs front and rear from Headlight Revolution.

“The headlights are a world ahead of the old Maxxima LED units, which themselves outperformed the Sylvania Halogen sealed beams, while staying very under the radar, with their sealed beam-inspired looks. And the turn signals are now highly noticeable, even in the brightest daylight.”

 

Enjoying the Ride

Dirk’s been driving his Z-car pretty much every day since the latest upgrades, and it’s been working phenomenally well:

“The drivetrain + brakes make it as happy to accelerate as it is to stop, and with the quick, closely spaced shifts and eager engine, it’s fun to do a casual grocery run, and to drive quickly. With the electrical systems and all fumes well under control, it’s truly a car you can do anything with, and probably more reliable than my BMW.”

 

We loved to see Dirk driving his Z on rallies and fun runs this year. Most recently we joined fellow Japanese vintage car owners on the Tokyo Calling event hosted by Breakfast Club Rally:

 

Dirk also joined us for a New Year’s Day drive through our favorite Bay Area Backroads:

 

We enjoyed working with you Dirk and it was rewarding to help improve your Z.

“Some say good is the enemy of great, but that’s true if you think you’re done. I don’t see my Z car less as a “build” that’s done. I’m always developing it, just like continually developing a race car (e.g. my Lemons car, http://instagram.com/bittersc243) to stay competitive. In this case the competition is merely for making the Z into the most fun driving experience I can imagine, and the journey of continuous refinement and improvement is a big part of the fun for me.”

 

While Dirk works through a few interior projects (new carpets, stereo upgrade) on his own, we’re getting ready to further revise the front suspension/steering, and wider wheel + tire options. Enjoy more photo documentation of our work in the gallery below. Thanks for your support Dirk and LONG LIVE THE Z!

 

 

Our Z Car Garage Big Brakes have been winning over Z-car enthusiasts locally and globally. Jay recently purchased a set for his 1972 Datsun 240Z and performed the installation himself at home in South Carolina. Last year Jay also purchased a set of Panasport wheels from ZCG and he’s been enjoying the ride. Before we go into his Big-Brake experience let’s hear his Z-story…

“The car was from California and made its way to Gainesville FL and was put in storage. I had been looking for a good 240 and this one was taken by the owner to a shop owned by a friend of a friend. The guy wanted to get it running and sell it. That triggered a phone call to me while on a anniversary trip with my wife to Italy, we were living in St Augustine Florida at the time. My buddy sent me some pics and a quick video and he grabbed the car for me. It was all there and very little rust. I had not really considered a Blue one, much less one with white interior.”

 

Z Car Garage Big-Brakes

     

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

A few closer detail shots of the calipers, rotors and hardware:

  

Big-Brake Kits Available For DIY Install!

Z Car Garage is proud to offer our Big-Brake Kit to Z-Car owners that want to perform the installation themselves. We can ship worldwide and each kit contains everything needed with a comprehensive (40-page) installation guide. Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE. Enjoy these pictures of Jay’s beautiful S30 and his ZCG Big-Brake installation:

 

As mentioned, our ZCG Big-Brake kit ships with everything needed to install and retains the factory parking brake. Jay successfully installed the BBK on his Z along with a full suspension rebuild:

 

“The kit was packed and labeled extremely well, everything was included except for brake fluid.  The manual Rob sent me was very good. If you are looking for a great bolt on brake solution for your S30 with no need to cut n paste parts to make it all work, look no further than Z Car Garage. Great quality and Great folks to deal with. I had a small hiccup and Rob jumped on the phone and had me fixed up. Very happy with my purchase!”

   

Jay used OEM bushings and parts for his suspension refresh and full exhaust system from Zstory:

 

Beyond ease of installation and quality components, our Big-Brakes perform by offering superb pedal feel…everyone that drives our demo Z confirms! This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. Jay was very happy as well with great feedback:

“The performance of the brakes is awesome. My car is essentially a stock L24 but I live in the Blue Ridge Mountains and we have a lot of great driving roads and frankly the stock brakes sort of didn’t inspire confidence. This allows me to drive the car a lot harder with no worries. Super happy with the fit, finish & performance of the brakes. Thanks to you guys for making parts that take these old cars to the next level.”

 

Enjoying the Ride

 

Jay has been braking deeper and with more confidence on those Blue Ridge mountain roads, we love that this Z gets driven! Enjoy the short video Jay sent us the Z in action:

 

Z Car Garage is proud to offer 13×7 Panasport racing wheels for your Datsun 510. These are +3 offset and perfect fitment for your B-Sedan/TransAm series Datsun 510 running vintage-class spec 205/60/13 Hoosier R7 (and other) tires. Price is $250 per wheel.

 

Shown above: Rob Fuller and Masayoshi Kobayashi, President of Panasport/Mag Formula Inc at Laguna Seca with the 13×7 Panasport wheels we run on our Bay Area Datsun Dealers 510. Here are the 13×7 Panasport wheels featured on a few client 510 race cars:

Kelvin’s Ex-Ted Gruner TransAm 510

 

Gabe’s B-Sedan:

 

Todd’s Far Performance 510

 

Ed’s 510

 

More photos of the wheels can be seen in the gallery below

 

Contact us: rob@zcargarage.com or call 408-452-0350 to order your set!

 

Panasport wheels for your Spec Miata!

 

Yes, when Z Car Gargage is not supporting and racing Z’s or 510s we are avid Spec-Miata fans. ZCG now sells 15×7 +35 offset Panasport racing wheels for your Spec Miata. Price is $250.00 per wheel.

 

Panasport wheels for your Z car

     Treat your Z to a brand new set of  Panasport Wheels! We special order this offset to enable fitment of a 225/50/16 tire on the 1970 to 1978 S30s. Price is  $325.00 per wheel

Contact us: rob@zcargarage.com or call 408-452-0350 Limited availability (pallet pictured)

Wondering how a set of Panasports would look on your Z car? Please enjoy pictures below of ZCG customer cars in just about every color imaginable with Panasport Wheels:

…[read more]

 

Very cool history of the S30 Z (and Fairlady Z432) on the latest episode of Revelations with Jason Cammisa:

 

Pretty cool to see my Datsun Roadster and our friend Glenn Chiou’s 1972 Fairlady 240Z-L make cameo appearances too!