Our friend and fellow Datsun enthusiast/racer Glenn Chiou recently acquired this R32 GT-R. Before we describe what brings this Skyline to Z Car Garage let’s hear how Glenn found the dream car of his youth:

“As a teenager growing up during the Fast and Furious days it was not hard to get caught up in the import car craze. Amongst the boy racer fantasies of owning RX7’s, Supra’s and R34 Skyline GTR’s, I developed a strong interest in the R32 GTR. The simple design, yet brute power intrigued me. It was always a car that was unobtanium to me. After hearing that I would be able to federal legalize one after 25-years I had to pursue one. Although the car was technically legal in the United States, the wonderful state of California hindered ownership. It was then I learned about International Vehicle Importers run by Skyline aficionado Sean Morris. On a whim, I headed down to IVI in Long Beach, California to take a peek at what they had to offer…”

“As with all my cars, I always look for a unique factory offering during the selection process. After further research I learned that there was a version homologated for racing – the NISMO edition. Nissan built a total of 560 NISMO BNR32 models for homologation purposes to compete in the FIA’s Group A racing class. A total of 60 of the 560 cars were destined for Group A racing in Japan and Australia. NISMO models included twin steel fan turbos (opposed to ceramic), an additional lip spoiler, front brake cooling ducts, side skirt aero splats, removed ABS, and a rear wiper delete. Being a racing junkie, I knew this was the car for me. I took delivery of the car #459 in November 2016 and could not have been more excited. The car provided a unique experience like none other. As an owner of both vintage and modern cars, I was amazed at the fact that this car was designed and built in the late 80’s!”

 

After a year of ownership Glenn was yearning for an even more enjoyable driving experience. He decided to take a period-correct approach of modification using high quality parts from the era when possible. Shown below are a full Trust Titanium exhaust, authentic NISMO steering wheel and the crown jewel of period-mods: 400R-spec NISMO LM-GT1 wheels! Sized 18×10 with stickier tires all around paired with Ohlin DFV’s coilovers:

 

 

Fast forward to November 2017. Glenn was prepping the Skyline for the R’s Day track event at Laguna Seca. With the 12/9 date fast approaching we discussed his GT-R and switching over to the Haltech Platinum Pro Plug-in for engine management. Glenn was excited and Godzilla visited Z Car Garage:

 

  

Whenever we install the Haltech Platunum Pro on a GT-R we switch from a mass air flow (MAF) to a manifold absolute pressure (MAP) based setup. The dyno graph shows how we were able to make more power and area under the curve while keeping the car safely tuned on 91 octane:

“To put the cherry on top, we had Z Car Garage work their magic with a Haltech ECU and tune. In short, the car WOKE up. The superb handling coupled with the drivable power made for a perfect track day car and canyon carver.”

 

Where better to test the R32’s newly found limits than on the race track? We had a blast driving with Glenn and friends at R’s Day in December. He was stoked:

“The car performed beautifully and stuck like it was on train tracks! The car was incredibly predictable and just all-around very enjoyable to drive fast. I look forward to more improvements to the car in the near future, as it will serve as my fun toy between vintage race days!”

Thanks for letting us tune your special R32 Glenn! If you haven’t experienced R’s Day here’s a neat video and coverage from Speedhunters.

UPDATE: Glenn’s Datsuns

 

 

Glenn is an avid Datsun enthusiast having owned and raced several cars. You might remember his VIPS 240z vintage race car from the Rolex Monterey Motorsports Reunion last year where he ran the Z alongside our hero John Morton. We also dyno-tuned the Z in preparation for race week. Look for #39 at various events this year!

  

Next up for restoration, Glenn has located IMSA GTU/Trans Am 260Z, chassis # 000024, formerly driven by Greg Sorrentino of Different Drummer Racing. We know Glenn will do it justice by the amazing work he performed bringing back the Loren St. Lawrence Z:

  

Glenn loves his vintage race cars and he recently added this B-sedan Datsun 510 to his stable! We should be dyno-tuning it soon. Look for it on the track at this year’s B-sedan races with SVRA:

Let’s not forget Glenn’s street car, his RHD 240z-L is well known in the Datsun community and the subject of a nice feature film on Petrolicious.

 

The Z has a powerful Rebello stroker motor with triple-mikuni’s and runs perfectly sized Watanabe wheels. On that wheel-related note, we are really excited to report that Glenn will be running our ZCG Big Brakes for small wheels behind those magnificent 15″ Wats! Look for a full report soon. You can catch Glenn putting it through its paces on the 2018 Coastal Range Rally hosted by the good folks at DrivingWhileAwesome.

 

 

Good luck at the races this year Glenn!

 

SEMA was a blur this year—but that’s really no different than any other year for the most intense sensory overload in car show form on the planet. This trade-only show features all of the latest and greatest builds, technology, and creativity in our industry. While the show has historically been populated by American marques and their aftermarket support, in recent years the influx of Japanese metal (Nissan included) is undeniable.

  

We only attended the show for one day and while the crowds were as appalling as ever in the Las Vegas Convention Center, the quality of cars made it all worth it. It wasn’t just “cars” that got us excited, it was the astonishing number of vintage Datsuns/Nissans! The variety was astounding. We counted 16 cars from a 1972 Datsun 510 to 1983 Skyline and everything in between.

 

Year of the Datsun!

Our Datsun-hunting at SEMA started with Datsun 510s. Pro-drifter Chris Forsberg built this hot-rod 510 wagon for his wife. The Mazworx-built SR20DET is backed by an automatic transmission and even sports air-conditioning. Deep-lipped SSR MKIII wheels fill out the box-flares that are part of the “Hakobird” kit from Carbonsignal. This might be the closest thing to Hakosuka Skyline wagon!

 

Our friend and fellow 510 racer Troy Ermish built this ultra-clean 510 2-door for actor Daniel Wu. We dig the bronze Watanabe wheels and subtle paint color. A built L-series breathing through dual-Mikuni’s and stock-ish interior also makes us happy. You can learn more about the build from our friends over at JNC.

 

Our final 510 sighting was the legendary Pete Brock’s personal car in Braille battery booth. Affectionately known as “Datzilla”, we remember first seeing this 450hp small-block V8 beast back in 2008 at the MotoringJ Style show.

  

Z Car Fever

A total of NINE S30 Z cars were at SEMA this year. That may not seem like many, but consider just 3 years ago only two Z cars were present. It was hard to pick a favorite but we were impressed with the Gas Monkey Garage 280z and the ChasingJs 240z built by Big Mike and Dominic Le, respectively.

The Gas Monkey Garage 280z

 

Big Mike was commissioned to design/build this 280Z 2+2 for the TV show Gas Monkey Garage. We loved how he took a often un-loved chassis and created a unique car that Datsun fans and American-iron alike can appreciate. Some quick details that caught our eye: the huge void found in front of the 4-cylinder SR20DET was filled with an OEM-like air filer box. The stock interior features vintage buckets with matching rears. The body color choice was perfect against bronze Volk TE37V wheels. Watch for two episodes covering the build airing on Fast n Loud TV on the Discovery channel!
…[read more]

Last week our friend Eric Straw visited us for tuning on his incredible RB26DETT-powered 1984 DR30 Skyline. You might remember Eric stopping by the shop last year on his way down to the JCCS show, where the DR30 put down 462hp/348tq on our dyno. Eric expressed interest in more power without sacrificing reliability:

“The only plans I have for it at this point is a pair of GT2860RS, new injectors and Haltech Platinum Pro Tuning by Z Car Garage in spring”

  

So spring arrived and Eric collected his parts including new GT2860RS turbos, Radium Engineering fuel supply, Injector Dynamics ID1050x injectors, and a Haltech Platinum Pro from ZCG. Rob began dyno tuning sessions and road data-logging.

 

Eric wanted the Skyline to run on Oregon’s readily available pump gas, and the result was 532hp/389tq to the wheels on 92 octane. Power delivery is very linear and Eric’s fastidious chassis-prep harnesses the power so well it is hard to believe you are riding in a 80’s Japanese car!  Here is video of the DR in action:

 

Our good friend Michael Spreadbury accompanied Eric on the roadtrip down from Oregon. Michael was instrumental in the DR build and is a well-known Datsun-guru building some killer SR20-powered roadsters from his shop at Spriso Motorsports. While the two were in town Rob shared the Nissan Patrol and had the boys put some miles on the DR30 after the fresh tune.

  

On Saturday 4/15 we had a great opportunity to take the DR30 to Laguna Seca and watch
Patrick Chio race in the USTCC and our customer Kevin B enjoy a track day. I had to join in on the fun with my roadster 🙂

 

The Skyline was impressive to watch on the freeway. From inside it feels like it is carved from billet with surprising balance between ride stiffness/NVH. Oh, and that RB26 is velvety-smooth with thrust for days. We think Eric is quite happy look at that RHD smile!

   

Laguna Seca was filled with plenty of eye candy. We even saw a few BAYZA Z32s/Z31s! Always fun to see owner’s solutions to the ever-changing sound restrictions:

 

Laguna Seca also makes a fantastic backdrop for photos.

 

 

At the end of the day we snuck into the garages to capture some “pretend” race-day shots:

 

The trip home was exhilarating. The DR30 has some glorious 80’s lines and those after-burner tail lights glow just right at dusk:

 

We had a rad time with you Michael and Eric!  Enjoy The Boost!

More pictures in the gallery below

More pics in the gallery
…[read more]

 

Eric Straw is a long time friend of the shop and hails from Oregon. Last year he visited Z Car Garage on the way down to the JCCS show where he debuted his latest masterpiece, this 1984 Nissan Skyline RS-X. Most Americans are familiar with the classic 70’s Skylines and later GT-R series, but this 6th generation (R30) chassis remains unknown unless you are a JDM-nerd. In Japan the R30 sold well and had a great following with Nissan enlisting the famous actor/racer Paul Newman to appear in ad campaigns. The R30 also formed the basis for the insanely cool SuperSilhouette race car:

   

The details of Eric’s R30 are endless. I don’t want to reveal too much as it deserves a major media feature first. It would be easy to write thousands, if not ten thousand words about the character, the touches, and the simple uniqueness that make the “Straw30” one of a kind. Where I fall short of storytelling, I hope photos suffice.

To get an appreciation of Eric’s talent as a fabricator and his build aesthetic take a quick look at his other Datsuns, a 1969 Datsun Roadster and 1971 Datsun 510:

 

  

Both deserve their own feature but can you see a theme starting to build here? Eric has a penchant for white paint and red valve covers…and turbocharged Nissan powerplants!

 

Finding A Skyline

It all started with an ad spotted on our good friend’s site, Bring A Trailer for a 1984 Skyline without an engine. This appeared to be the perfect specimen with the distinctive Tekkamen or “Iron Mask” front end compared to pre-facelift models with a conventional grille. Fellow Datsun enthusiast/restorer Michael Spreadbury of Spriso Motorsports joined Eric on the trek to Washington to pick up the R30.

 

As with most of these vintage Japanese cars, rust was a hidden issue as Eric discovered:

“When I first saw the car I wanted to make a really fun driver with lots of power and for sure RB powered. I didn’t plan on restoring the body when I bought it. After digging in, it was obvious I had to do a complete restoration as there was a lot of rust.”

Chassis restoration

What begun as an engine swap turned into a full blown bare metal restoration. Eric’s work simply goes beyond an OEM restoration. There are so many areas of custom fabrication throughout the chassis. We simply have not seen this level of care and love executed on an R30.  Here is Eric putting in work:
…[read more]

 

Over the years Z Car Garage has worked on almost every chassis of Nissan Skyline from the early GC10, R33, R34, and current R35 platforms. We love the R32 model and recently had the chance of helping one get back on the road. David C is the lucky owner of this beautiful black R32 Nissan Skyline GT-R. He acquired it through the internet and had it towed to a shop where it unfortunately remained sitting. David had even purchased an entire RB26 front clip to get the R32 running again but there was no progress. After hunting for a shop that could handle the task of waking Godzilla from its slumber David contacted Skyline guru Sean Morris who then referred ZCG….challenge accepted!

 

David and Rob spoke over the phone and agreed to tow it to the shop. Within a few hours of getting the Skyline our very own Josh C figured out the culprit. The fuel delivery system had been modified by the PO and fuel pump bypassed. Thanks to Josh, Godzilla fired right up and David was able to drive his GTR for the first time in 3 years! Unfortunately the engine was not healthy as cylinders 5 and 6 had low compression. David decided it was time for a change and sold his front clip in favor of rebuilding the existing RB26.

Teardown: Godzilla’s heart is quite complex!

 

The bottom end was built with Rebello consisting of forged JE pistons, and Eagle Rods. Mild headwork and stock turbos make up the top end:

The freshened powerplant along with a new clutch/flywheel are reunited with the chassis.

 

A new, OEM coil plug cover adorns the mighty RB and we also installed a few ancillary parts like this remote oil filter/oil cooler:

 

With the drivetrain buttoned up the engine was carefully broke-in by Rob. The PowerFC that came with car shorted and caused running issues so we switched to a Haltech Pro Platinum. We were impressed with the ease of tuning and base map of this plug-in-play solution.  The GTR was  dyno tuned conservatively on 91 octane making a silky smooth 384hp/305tq to the wheels!

 

With the Skyline running strong David treated it to full suspension to make those open track days enjoyable. Front/Rear coil-overs, sway bars, T/C rods, camber/control arms and a host of goodies from Cusco and Powertrix:

 

 

When was the last time you saw an R32 with Stoptech brakes at all four corners?  R32s are relatively heavy cars and with 400hp it’s easy to overwhelm the stock the setup. Large, 332mm vented rotors F/R will ensure fade-free braking duties:

  

The uprated brakes are housed in beautiful Forgestar wheels, running a square 18×10 with 265 tire setup:

  Adjusting the coil-overs for ride height before/after, we think it sits just right:

We love that David immediately started Enjoying the Ride in his GTR not just on the street but on the track! Here he is attacking Thunderhill Raceway:

 

This Skyline is Driven! Thank you David for letting us be part of your project, your R32 is wicked!

Check out more detailed pictures in the gallery
…[read more]