We are excited to offer the Z Car Garage Heat Shield for your triple-carb’d L-series Z car. This is a one-piece 304 stainless unit with laser-etched serial number. Proven on all of our L-series engine builds and dyno testing.

 

This heat shield will fit Mikuni, Weber, Dellorto and Jenvey induction with several intake manifolds like the Harada. Also available for 4-cylinder L-series applications as well! Utilized on both race cars and street cars. Shown below are ZCG clients running the heat shield on their cars, starting with JDM Legends’ epic S30 build:

   

We love to see our products being installed and used on customer cars. Race car driver and restoration specialist Jim Froula of Racecraft is running our ZCG Heat Shield in this vintage 260z race car! Volume up and enjoy!

 

 

Richard’s 1971 Datsun 240Z:

  

 

Khang’s EFI L-Series with Jenvey ITB and Z Car Garage Heat Shield:

Vincent’s 1973 Datsun 240Z:

 

More Z cars running the ZCG Heat Shield:

      

The ZCG Heat Shield is available for purchase for $169.00 with product information below. View this product and other ZCG parts on the new “products” page of our website HERE

 

 

 

We love to see owners installing our Z Car Garage CV Axles in their vintage Nissans and Datsuns. Adam D is running a set on his 1971 Datsun 240Z with an RB25DET drivetrain.

 

Z Car Garage is proud to offer a CV axle conversion kit for your Datsun S30 and 510. We have sold over 200 sets of axles globally, with customers installing and enjoying them on everything from street cars to full-blown IMSA racers. These CV axles will help transmit power to the ground and ensure smoother operation compared to your standard half shafts.

  

For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft. These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars. Each axle has a serial # for peace of mind and the kit comes with everything you need to install on your car.

 

Datsun 240Z Dreams

 

Adam shared his Z car history with us:

“I heard about Z car Garage on YouTube. I own a 1971 240z with a Series 1 RB25det and it’s been my dream build since I was a teenager. My neighbor growing up had a 240z and he made his look so sporty I had to have one. I always loved Hondas and Evos which I’ve owned and built,but the 240z for me was my all out build as far as performance since it’s a classic car and I don’t have to worry about emissions. I’ve been building this car since 2013 when I bought it as a rolling shell with the RB for $7500 off Craigslist...”

 

“I first had the body work done paint and body by Mikes Paint and Body in Fullerton. He molded in my fenders. Then I found Nissan RB engine specialist vendors (Rawbrokerage) built the motor with Animal auto. I recently had fabrication to make custom titanium and other metal work by humble engineering.”

   

“The car has full T3 suspension and arms with Z Car Garage Axles. I chose these axles since I wanted over kill if I want to push more power. I run a Garret Gen 2 g35 .82 ar. The car runs on a Haltech stand alone rated at 530whp. I am highly satisfied with the axles and I like how when I called and had questions Rob took time to talk to me. Future work is more cosmetics and interior .”

        

 

ZCG CV Axles

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. These are 100% bolt-in replacing your half-shafts and does not use aluminum adapters commonly found in aftermarket units. We have over 200+ CV axle kits on customer cars and we are stoked with all of the positive feedback.

   

For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft.

  

Designed and manufactured locally with KAD Models, the ZCG CV axle kit works in both R180 and R200 configurations.

  

These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars (powershifting, clutch dumps, etc.). Each axle has a serial # for peace of mind:

 

The CV axle kit is available now from ZCG for 1595.00 + freight and they come with everything you need to install on your car. Contact us at 408-452-0350 or send Rob an e-mail rob@zcargarage.com to purchase. Installation is just like doing a half-shaft: there is even a marking that shows you where to line up bolts and special hardware:

The ZCG CV Axles in action

The video below demonstrates the “looseness” associated with aftermarket CV axles that use adapters compared to the ZCG axles without adapters. Several customer race/street cars running our CV axles are also shown. Enjoy!

 

Enjoy this video made by our client Hazel. She installed our ZCG CV Axles on her Hazel’s 1970 Datsun 240Z

 

Over 200 sets of our ZCG CV Axles are installed in client’s cars all over the world:

Supermachine in Tokyo, Japan is running our Z Car Garage Big-Brakes and Z Car Garage CV Axles in their Series Datsun 240Z:

 Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!

 Racer Brad H is running ZCG CV Axles in his IMSA GTU race car:

 Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:

Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:

 Set #247 – installed April 2018 on the 260z

 Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.

 

 

We have great news for clients that have purchased our Z Car Garage Big Brakes. The calipers recently left the forging company and they are now being machined at Stoptech. Once calipers are anodized they will be ready to ship in the coming weeks, fulfilling all back orders. We apologize as parts supply issues have caused delays. Thank you all for your patience, believing in us and supporting ZCG.

 

The Last Stop in Braking for your Z

 

Z Car Garage Big Brakes are one of the best systems available for your S30 Z Car with over 140 kits sold worldwide and unanimous positive feedback. See our ZCG Big-Brakes on client cars HERE and enjoy the photos below:

   

 

 

 

We love to see our products being installed and used on client cars. Tobi is running our ZCG Heat Shield in his 280ZX!

 

Close-up of the ZCG Heat Shield, this piece is serial #00276:

  

Tobi is a relatively new S130 owner and started modifying it in no time!

“I got the car in the fall of 2020, it definitely needed some love, but it came with a N42 head so that was a big plus for me! While browsing through Instagram I saw a lot of guys in Japan would switch from EFI to a DCOE setup, while some told me it would be a bad idea, I loved the sound of a carb’d L28 too much. I got to work on the conversion during the winter months of 2020 and went with triple-Webers on a Canon intake manifold. While I had the car apart I added T3 front and rear suspension, MSA victory spoiler, and a set of MSA twice pipes. I was super excited when I fired it up for the first time.”

 

During the summer he  took it to car shows around town and enjoyed ripping it around, but he was having some clearance issues with the heat shield, so he purchased our Z Car Garage Heat Shield:

“I couldn’t have been happier. The build quality on the shield when I unboxed it was amazing and it went on my manifold like butter, it also fixed my clearance issues too. My future plans for the car are to save up for some  Z Car Garage CV Axles and a 240sx gearbox swap in hopes of taking the car to the track.”

ZCG Heat Shield

  

We are excited to offer the Z Car Garage Heat Shield for your triple-carb’d L-series Z car. This is a one-piece 304 stainless unit with laser-etched serial number. Proven on all of our L-series engine builds and dyno testing.

 

This heat shield will fit Mikuni, Weber, Dellorto and Jenvey induction with several intake manifolds like the Harada:

 

The ZCG Heat Shield is available for purchase at $169.00 with product information below.  View this product and other ZCG parts on the new “products” page of our website HERE

 

Thank you for your support Tobi we are happy to see our product on your 280ZX!

 

We love to see our products being installed and enjoyed on customer cars. Classified Motorsports in Kelowna, BC is running our Z Car Garage CV Axles in this Datsun 510 race car.

 

The CVs are being installed in a R200 with OS Giken Super Lock LSD:

 

This 510 is powered by Chevy V8, you can see it action below:

 

You can see more of the 510 on Classified Motorsports’ Instagram. Thank you for supporting us and enjoy the Z Car Garage CV Axles!