On Saturday, June 12 I attended the Breakfast Club Rally. This was my second time at the monthly event and I highly recommend it for anyone looking to enjoy the beautiful Northern California roads and scenery. I took my Datsun Roadster and left San Jose Saturday morning, driving 80 miles North to the starting point in Mill Valley. I spotted this MGA buzzing along the freeway, and many more vintage cars were on their way. Enjoy this report from the event.
Cars & Coffee? Yes Please!
The Breakfast Club Rally (BCR) started almost 1 year ago, now running its 15th rally event. What started out as a small group enjoying weekend drives blossomed into a full-on Cars and Coffee (still unofficial) meet just before rally participants head out according to run group (rally map available to pre-registrants only).
I arrived at 8:30am to an already packed parking lot. BCR is mostly vintage, “brand agnostic & 100% anti-snob”…and the scene was just as advertised. Cool cars everywhere. Of course, yours truly is always on the lookout for Nissans and Datsuns:
First up, this 1967 Datsun 2000, owned by Ian S. One of the most sought after Datsuns, these “half-year” models were introduced mid-1967 offering a 5-speed transmission and 150hp twin-Mikuni carb’d 2L engine…hot stuff for the era. This is SRL #601 (out of ~1000 cars) and it was fully restored years ago by Les Cannaday in San Diego. Ian is meticulous about maintaining this car, but it is no garage queen. The (655) Off-white paint with red interior is one of my favorites.
Met a fresh Datsun Roadster owner! This is Michael’s ’70 2000. He purchased and drove it from SoCal to San Francisco.
Two vintage Datsun Z cars. (top) is BCR founder Graham’s personal 280Z:
Two Datsun 510 wagons and Nissan 720 truck!
This was a total surprise…our client Mike’s R32 Skyline GT-R! Fresh from our shop with turbo, fueling and exhaust upgrades he is out Enjoying the Boost! Watch the video below for the sounds this beast makes…full report soon.
So many cool cars please check the gallery for more photos!
Rally On!
The rally started at 9am and somehow all of the cars gracefully exited the lot, heading towards the coast to Point Reyes Station. Weather and terrain changes abound and even a few route changes kept things interesting. Crazy machinery was always fun to see!
Arriving at Point Reyes Station was another opportunity to see cars I missed at the starting point. Folks took a snack/coffee break here in the quaint town. I sat down near the sidewalk, just admiring each vintage ride cruise by…like this Ferrari 250GT!
This is a grand, picaresque part of Northern California with rolling hills, pastures and Eucalyptus-lined blacktop. Coastal fog could be seen creeping into valleys and gentle rivers meandering through hillsides had me fighting to keep my eyes on the road!
One of BCR’s clever mottos is #DoneByNoon, and we eventually found our way to downtown Petaluma for lunch. I joined fellow roadster owner Ian (with his son) and Graham at Brewster’s Beer Garden in the historic district. Good food on the patio with great company.
Another perk of the BCR is the many talented photographers they have enlisted to capture rally goers in action. Your ride may have been immortalized so check out their work HERE! As we parted our ways, I snapped some rolling shots of Ian’s ’67 Datsun 2000 on the freeway. It’s hard not to take many photos of this roadster, it’s that pretty.
I headed back home to San Jose to complete the almost 270-mile trip. Driving across the Golden Gate Bridge and through San Francisco is always a treat.
A short video capturing the day:
Thanks BCR!
Many thanks to the organizers, I had a blast with Breakfast Club Rally. I urge you to register for their next event, especially if you are in the South Bay area like me and want to see what driving bliss lies North. #DoItInADatsun
We promised our readers a full, zcarblog.com report on Trevor’s 280Z after it was featured on Hoonigan Autofocus with Larry Chen. Let’s take a closer look at this fantastic daily driver+canyon carver showcasing our Z Car Garage Big-Brakes, Z Car Garage CV Axles, CD009 Six-speed transmission and more.
The Next Big Thing
It’s no secret that S30 chassis values have skyrocketed in the past few years. While the 240Z commands top dollar it has become out of reach for many enthusiasts. Not to worry, Datsun offered the 260Z/280Z models and both are great, attainable chassis in the S30 world. Trevor shares how he found his 280Z:
“I met my Z in almost completely stock form with 94k original miles. I travel for work, ending up in a new town every 6 months or so. As soon as I had an inkling of where I was going to be sent next, I would start hitting the internet classifieds for a 280z. While the 240z had seductive weight savings over the later versions, my attention turned to the 280z for its fuel injection (with constant travel I didn’t want to have to tune carbs), it’s price/ availability, and they are easier to find with air conditioning.” Below, left is the night Trevor bought his Z:
“I found my silver Z in Phoenix, Arizona. The only things it had on it that weren’t original from the Hiratsuka factory were the wheels, springs, and Toyota 4×4 front brake calipers. The rest of it was stock, and most importantly, complete. I did a little work to get it running smoother, basically replaced all maintenance items and swapped out a few sensors that weren’t working, and then drove it as much as I possibly could.”
Trevor was looking for a shop to take care of his 1978 Datsun 240z and heard about ZCG from a shop tour with Larry Chen on this episode of Hoonigan Autofocus (Thanks Larry!). Trevor brought the Z in last summer and we performed a full inspection before upgrades.
“I chose to send my Z to Z Car Garage after watching Larry Chen’s Autofocus episode on the shop. I could really tell that Rob had a ton of passion for what he does and I knew I could have confidence with him at the helm. Before I had showed up at the shop, Rob and I had talked on the phone about doing the brakes, control arms all the way around, and a couple of other smaller things. I wanted it to handle as best as it possibly could and that meant stopping when it should and having the adjustability in the control arms to set up a proper alignment. ”
ZCG Big-Brakes and CV Axles
We handed Trevor the keys to “Mrs. Butters”, our 1971 Series 1 240z shop demo car and he was sold on our Z Car Garage Big-Brakes (for small wheels) and Z Car Garage CV Axles! Butters has a way of doing this to our customers 🙂 Read below for a brief description of these parts:
As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with engineers at Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel (and some 14″ wheels) and retaining factory emergency brake lever! A few details below:
Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)
Rotors: 280mm x 20.6 with Alum 7075 hats
Pads: Stoptech 309 sport street pads
Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.
A few closer detail shots of the calipers, rotors and hardware:
We removed Trevor’s existing brakes and installed our ZCG Big-Brake kit. The stock suspension (with Tokico struts/Eibach springs) was replaced by Apex Engineered parts, as supplied by Trevor. Shown below are front/rear control arms and T/C rods being installed, more pictures in the gallery:
Front control arms and TC rods:
ZCG Big-brakes replacing the Toyota 4×4 caliper setup:
At the rear, the factory drum brakes were replaced with our ZCG Big-Brakes. Factory handbrake functionality IS retained!
Trevor is impressed with the braking performance:
“I quickly found out that even after just a short spirited mountain drive, the Toyota brakes would get hot and fade. It didn’t help that after getting a taste for driving her quickly, I wanted to do a few track days in the future. I knew I wanted a brake upgrade, one that I would only have to do once. After getting back to Southern California I was really able to put the car through its paces on the canyon roads. The ZCG Big-Brakes proved their worth and were consistent and didn’t fade even after a few good rips up and down the mountains. This car sticks to the road insanely well. With the alignment and new tires it just carves.”
Z Car Garage CV Axles
Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 130 CV axle kits on customer cars and we are stoked with all of the positive feedback.
Trevor has CV Axle set #335. Stock half shafts (L) and ZCG units:
More pictures of the ZCG axles installed, also visible is the ZCG Exhaust system:
Panasport Wheels
Complementing the new Big-Brakes on Trevor’s Z are Panasport wheels! We replaced the aftermarket wheels with 16×7 Panasports and sticky Bridgestone RE-71R tires in 225/50/16. The Z was fully aligned:
Engine
We knew the car would be stopping and handling better than before, so we installed a Moroso oil pan and Koyo aluminum radiator to keep temperatures in check. Other than cooling and fuel system work, the engine was largely untouched to maintain factory reliability.
We replaced intake and exhaust manifold gaskets with factory Nissan parts and few ZCG tricks including a certain exhaust nut and exhaust stud.The exhaust manifold was replaced with a Pacesetter header ( to clear six-speed) leading to our ZCG exhaust system with stainless resonator and slash-cut tip.
Dyno Tuning
Rob dyno tuned the L28 with OEM EFI. Baseline was 133hp/149tq and with Rob’s tuning it made 143hp/159tq at the wheels:
Enjoy the dyno run video below:
Driveline Upgrades
We built Trevor an OS Giken LSD, a perfect upgrade for anyone doing spirited driving.
“As with the brakes, I figured the best way to do the driveline was once so I also went with an OS Giken LSD and Z Car Garage CV axles.”
We changed the final drive, installing a R180 4.11 OSG LSD built in in-house:
The clutch hydraulics were replaced to work with new aluminum flywheel/JWT HD clutch combo:
Six Speed Transmission
Next on the update list, we were really excited to install a Nissan 350z 6-speed manual transmission behind the L-series in Trevor’s Z. You read that right! S30 owners can now bolt-in this robust, 6-speed manual behind their L-series engine! You might remember our first application of Austin Hoke’s custom 6-speed adapter kit on the OS Giken TC24B1Z-powered 240z:
Using the 6-speed conversion kit from Hoke Performance we installed a new CD009a transmission from the 2003 -2008 Z33 in Trevor’s 280Z:
Here is the brand-new transmission from Nissan being unboxed:
The kit necessitated exhaust header changes and after testing a variety of headers we found the Pacesetter 6-2-1 unit provided enough clearance. Serial 9 provided the shifter relocation assembly and we are really happy with its performance. Also shown is the aluminum driveshaft.
It fits! More installation pictures in the gallery. It’s a very discreet look from the cockpit…until you feel the amazingly direct and precise feel of the CD009a!
Trevor is in love with the six-speed, we are as well:
“I had done my absolute best to convince myself that I didn’t need a transmission swap and my wallet and I were on the same page as I went to drop the Z off at Z Car Garage. Where my wallet and I started to have a disagreement was after Rob let me take Butters for a spin. After feeling the CD009 perform there was zero chance I was going to get my car back without one on the back of my L28. However, the more I was driving the car in the twisties, the more I started to become unhappy with the uneven gear ratio gaps between shifts.”
Details
We sorted out little things for Trevor like making his Speedhut tach and speedo functional. The car was fully detailed:
The Z was cut/buffed with a detail from JB mobile detail. We’ve worked with Veto at JB for years and he’s a big Z car enthusiast:
Driving is Believing
When Trevor picked up car, he was blown away:
“The car I got back is a totally different machine from the one I had dropped off. The result of the perfect combination of driveline parts is a sore face caused by either smiling the entire time or from your face almost leaving your head as Rob shows you just how well the brake kit works. Rob also threw her on the dyno and finally got the stock system performing perfectly. I’m sure it’s making more power than it did even new back in ’78.”
The Z was recently featured on Hoonigan Autofocus with Larry Chen. Larry and Rob discuss the work ZCG performed and take it for a spin. Watch the video to get an idea of the six-speed and power from Trevor’s280Z:
We enjoyed working with Trevor and he’s been Enjoying The Ride in his Z:
“I had flown up from the LA area where I was working to the shop in San Jose. My plan was to drive the car back down the PCH to get a feel for my new machine. I couldn’t believe how much fun the car was to drive on curvy roads. The CD009 feels great behind my L28. The shift pattern is short and precise, it’s fantastic. The rear end has no play and pairs nicely to the race feel of the CD009. One of the best parts of the combo is how easy it is to drive. It feels like you have a race car transmission but with the ease of use of a street car.”
“She’s back at Z Car Garage right now as my job has me in Omaha for the rest of the year. I have been talking to my wallet about coil overs and maybe an engine build while the car is in San Jose. My Z and I are apart right now but I cannot wait until I’m able to eat up more miles with her. She is a wicked joy.”
Thank you for entrusting us with your S30, Trevor. We are so fortunate to work with owners that appreciate the Z and believe in our ability to make them better! LONG LIVE THE Z!
Our customer Randy Jaffe’s incredible Nissan/Datsun collection is featured on the latest episode of Hoonigan Autofocus with Larry Chen. Join Randy and Larry as they walk through his collection and discuss street and racing cars from the past. This is a diverse collection you won’t want to miss, enjoy!
Filed under: 240z
by Alvin G @ 4:21 pm on June 16, 2021
Our customer Randy Jaffe’s 1972 Datsun 240Z is featured on the latest episode of Hoonigan Autofocus with Larry Chen. This is a special, “Vintage Z” that is 1 of 37 examples that Nissan had restored and sold as new back in 1997. Watch Larry and Randy discuss the history of the Vintage Z program and what makes them highly collectible cars. Enjoy!
Our customer Randy Jaffe’s 1970 Datsun 240Z Safari Tribute is featured on the latest episode of Hoonigan Autofocus with Larry Chen. This Z is based on the original car that won the East African Safari Rallies in 1971 and 1973. Watch Randy and Larry discuss the foundation for the build and little details that remain faithful to the original. There are many other Nissans and Datsuns in Randy’s collection with more features on the way. Enjoy!
Stay tuned for a full zcarblog.com feature where we will take a closer look at our work on this cool Z.
