Mike R acquired this gunmetal (KH2) 1991 Skyline GTR from Toprank International Vehicle Importers in 2019. Z Car Garage is familiar with the Norcal Skylines group and fellow R32 owner Kurt W referred Mike to us in addition to an endorsement from Top Rank. Mike’s first round of upgrades included a Project Mu Big-Brake kit, Ohlins coil-over suspension, Haltech ecu, Greddy FMIC, sorting and dyno tuning. All of this work is documented in our 2020 blog post:

 

More Upgrades

Following that initial visit, Mike added R34 GT-R Seats, and a sweet set of Volk Racing TE37 SL custom gloss black wheels (18×10.5 +15), wrapped in Michelin PS4S tires (265/35/18). A Haltech IC7 digital dash was added to monitor vital engine parameters, tying into the CAN box of Elite system:

Add More Boost

Mike was happy with the upgrades we made but like many of us the desire for more power inevitably hits:

“The car has been running flawlessly and the goal with these mods is to support the addition of a single turbo kit that ZCG will be installing this August. The turbo kit consists of a Full Race Twin scroll T4 manifold that will be mated to an EFR 8474 turbocharger. Twin Tial 44mm external wastegates will bleed off the excess exhaust gasses.”

(Below)Borg Warner EFR 8474 0.92 with T51r mod and Full Race T4 twin scroll Exhaust manifold:

Remade in USA throttles and Nismo plenum. Fully built cylinder head with GSC S1 cams, SuperTech valves, springs, retainers, guides:

PRP crank trigger kit, Radium Dual Catch cans, Custom Intercooler piping with Tial q50 bov and Nismo oil cooler:

HKS Super Turbo Titanium exhaust:

Mike’s R32 came back to ZCG in 2022 for a few more items including:

ATS Carbon twin disk clutch (shoutout to @wubbs18)
New oem timing belt and pulleys
PRP alternator kit
Kansai Service Towhook
OEM Valley cover powder coated with R34 ornament plate
Mines Alcantara shift boot, parking brake handle and boot

VIDEO

Enjoy this video of Mike’s R32 GT-R in action with dyno runs, in-car and drive-by footage. Volume up!

Dyno Tuning

Several dyno tuning sessions were performed during the upgrade period. 515hp/437tq on 91 octane was achieved with significant mid-range gains:

 

Mike was pleased:

“Big thanks to @zcargarage for seeing this project through to the end and making the car come to life. We had a lot of headaches and setbacks over the past 11 months, but they did an incredible job end result speaks for itself! Couldn’t be happier. 🤘”

E85 Fuel

“Ethanol delivery is handled by a full Radiumengineering fuel system. Fuel hanger surge tank using twin 525lph to feed the rail and a 340lph to feed the hanger. All new hoses with a -8 feed line. Radium fuel rail with Rail mounted adjustable fuel pressure regulator. All feeding Injectordynamics ID1700XDS injectors. Haltech Flex fuel Sensor and Bosch Fuel pressure/temp combo tied into Haltech Elite to bring it all together.⁣”

On the dyno with E85 the R32 put down 624hp/479tq at the wheels, and Mike continued to enjoy the car:

“So the car has been on flex fuel for a few months now. Made 600 whp and 480tq. Still just keeping the boost around 20psi. Tons of room left in the setup. Been enjoying the shit out of the car is it currently sits. Maybe some minor cosmetic stuff in the near future, but for now….just drive.”

Enjoying The Ride

We were happy to see Mike Enjoying the Boost and spotted his R32 in action at the Tokyo Calling and Breakfast Club Rallies in Northern California:

 

Catch more of Mike’s R32 on his Instagram. Overview of major work is below with more photos in the gallery. Thanks for your support Mike!

. Custom 4” intake
. Full Race T4 twin scroll Exhaust manifold
. Borg Warner EFR 8474 0.92 with T51r mod
. Turbosmart gen4 twin port IWG
. Custom Intercooler piping
. Greddy 29f Intercooler
. Tial q50 bov
. Nismo plenum
. @remade_in_usa_ restored throttles
. Radium fuel filter, fuel rail, afpr, and pulse damper
. ID1050x injectors
. Hellcat fuel pump
. Fully built cylinder head
. GSC S1 cams
. SuperTech valves, springs, retainers, guides
. Greddy adjustable Cam gears, timing belt
. PRP crank trigger kit
. Fluidamper
. Two six engineering power steering pump kit.
. RHD Auto power steering reservoir
. Nismo Oil Cooler
. PWR radiator with Samco hoses
. Haltech Elite 2000 pnp
. Haltech WB1 canbus wide and 02sensor
. Haltech IC7 digital dash
. Haltech 3 port boost solenoid
. Radium Dual Catch cans
. HKS Super Turbo Titanium exhaust

At Z Car Garage we are fortunate to be a part of our client’s sports car journeys. We first met Derek Y in 2014 when we worked on his 2005 Infiniti G35 back. A few years passed by and he visited us with his latest Nissan, this 2015 GT-R:

The R35 had only 11k miles and ZCG installed a host of power upgrades from AMS, EcuTek, SpecialtyZ, Turbosmart and more. You can read about this work from 2019, including the E85 flex-fuel and exhaust upgrades all in this previous blog post.

More Power and a New Look

Derek latest visit was earlier this year for dyno tuning, interior items and AirLift installation. When it arrived at the shop this R35 sported a complete Varis Kamikaze-R Ver. 2 widebody “Super Sonic” kit and Varis Kamikaze-R Ver. 2 Vented Carbon hood. The Air Lift 3H air suspension strut kit was installed with polished 5 gallon tank.

We ran all of the air lines, checked ride height and clearances for the slick Advan R6 Candy Red wheels (20×11 +15 front – 20×12+20 rear) with Toyo R888R tires (305/35/20 Front – 325/30/20 Rear), more installation photos in the gallery below:

We also installed a new, Overtake 100-V Saikou Exhaust:

A few minor items like a new battery, TPMS sensors in the new wheels and a final health check for Derek’s VR30DETT…but first we performed a re-tune with Ecutek for even more power.  Our last dyno session yielded 612hp/604tq to the wheels and it left with 640hp/622tq. What’s impressive is that this remains a supercar that’s easy to to drive:

Enjoy these dyno runs:

Interior

Derek had several interior items for us to install including: Mines Steering Wheel, Nismo Cluster, Nismo cluster shroud and shiftter paddles:

Derek is happy with the latest upgrades to the R35:

“I have been going to Rob for a while now, he worked on my car october 2019 (bolt on and e85 work done) and again recently with a new tune and air suspension and some interior mods. The work is always great its making more power now and more responsive linear power.”

Here are the SpecialtyZ 3″ intakes and AMS front-mount intercooler being installed:

More engine bay work including the AMS crankcase breather setup, ID 1300cc injectors (plus DW fuel pump upgrade), Turbosmart BOVs and a SpecialtyZ Flex-Fuel kit:

AMS crankcase breather being plumbed:

Stock vs Turbosmart BOV:

On the lift, AMS cat-less downpipes are installed:

At first glance it is difficult to catch all of the power upgrades in the engine bay, Stock (L) vs Modified (R)

Derek also needed new tires so we mounted fresh Michelin Pilot Sport4S sized 245/40/20 and 285/35/ 20.

Dyno Tuning

Back in 2019 , Rob dyno tuned the GT-R using an EcuTek flash and Derek also received a USB dongle for datalogging. Baseline power was 495hp/446tq with final numbers of 612hp/604tq to the wheels on E85:

A few plots showing the tuning session: Baseline to 91 octane tune with gains of 65hp/93tq (Left), and the final E85 tune for even more gains of 52hp/51tq (Right):

Video of the R35 on the ZCG dyno:

Thanks for letting us work on your GT-R Derek and enjoy the boost!