Yesterday we attended the DrivingWhileAwesome (DWA) Cars & Coffee event in Santa Cruz, CA. The event impressed us again with a fun vibe and superb variety of cars. Before the 9am meeting our group of enthusiasts enjoyed a brisk driving session en route to Santa Cruz. I was lucky to drive the ZCG shop car, a 1970 Datsun 240z. We started at the junction of HWY 92 and Skyline with a nice gathering:
Leading the pack was Naveed in his Hot Rod Porsche 912. You can follow the build of this 911 6-cylinder powered rocket over on Speedhunters.
Pall’s R32 Skyline in (AH3) Pearl Red. Pall K acquired this Pearl Red (AH3) R32 from our friend Sean and his team at Toprank International Vehicle Importers. We love the gorgeous paint color and Volk TE37SLs. He is also a ZCG customer!
Jeremy’s BMW 5-series Touring with a GM LS3 E-rod crate engine:
Matt’s G-body 911 with 17″ Fuchs and center exit exhaust…my newest P-car crush?
Andrei’s E36 M3
One of the many perks of DWA Morning Motors is its location surrounded by the best driving roads. Leaving the 92/35 junction we headed towards Alice’s Restaurant and HWY 84. Down to Stage through Cloverdale and finally Gazos Creek carrying us to HWY1 along the coastline to our destination. We arrived at 9am on the dot, thanks Naveed!
Mandatory Nissan/Datsun
I was happy to see a few more Nissans and Datsuns at MorningMotors. 260z!
There were a three Datsun 510s! Mark’s has been at the shop so stay tuned for a full report:
Dustin Frisk’s KA24-powered 510 on Longchamp XR-4 wheels:
A nearly-stock appearing 4-door 510:
Another ZCG customer, Eric’s FX sporting suspension and R35 GT-R wheels. Full report soon!
Two 300zx (Z32) NAs and G37 Sedan:
R32 Skyline 4-door, 350z, R35 and Infiniti Q45:
In Search of J-Tin
Morning Motors did not disappoint if you are Japanese Classic fans. Looking splendid were these white, boosted 80’s Hero’s: a DSM Conquest and Isuzu Impulse with snazzy interiors!
NA Miatas!
Turbo B-series DC2 Integra and a pair of EM1 Civic Si’s!
Honda S600 with a Motocompo!
Mazda FC RX-7 Turbo sitting on rad Panasport G7 wheels:
RHD, turbo diesel Land Cruiser!
So much variety! Enjoy this short video:
Euro Classics
Gen’s 911 Turbo S2 (964)
Outlaw 356 and lots of BMW 2002s:
Retro Sporting’s Mk2 Escort with tons of fab work. They are hosting a vintage car-only track day April 10th, check it out HERE
British
American Muscle
From 60’s to 80’s
This G-body Monte Carlo SS was badass!
Vette’s:
Eclectic
DWA CnC is definitely my kind of cars and coffee. It’s a great venue with amazing driving roads nearby and the cars were so diverse. We highly recommend checking it out! Thanks to the DWA crew for hosting. If you haven’t already, listen to their podcast and make sure you give them a follow on Instagram.
More pictures in the gallery below!
Filed under: 240z,Events
by Alvin G @ 6:51 pm on January 8, 2020
Last Sunday we attended the DrivingWhileAwesome (DWA) Cars & Coffee event in Santa Cruz, CA. Our group of friends left from San Jose and headed up HWY 17 on a chilly morning with myself, Rob and Meghan in our Datsun Roadsters, Geoff in his BMW 2002 and Ty in the 991 Porsche:
We were stoked to see Rob’s Datsun 2000 on the road with refreshed Mikuni-Solex carbs and it sounded wonderful. Full report soon!
In Search of J-Tin
The venue has moved since we last caught the DWA gathering in Davenport. Sunday’s event was held at the new location across from the Old Wrigley Building in Santa Cruz. By 9am the parking lot filled rapidly with a great diversity in marque and era.
Although attendance was mostly Euro/Italian, many Japanese gems showed up. Let’s start with the Nissan/Datsun showing. Ray’s Hakosuka Skyline was a pleasant surprise.
The last time we saw Ray was at the Golden Week Kyusha Festival where I learned that this Hako was from our friends at JDM Legends! We look forward to seeing Ray for some upgrades on this already stunning Skyline.
VQ-powered S30, R32 Skyline, S14 240sx and Infiniti Q45:
More J-tin goodness! Lloyd’s Corolla was a crowd favorite (mine as well) sporting a 4AGE fed by ITBs, Levin front end and perfect Volk TE37s. This AE86 coupe complements his F20C powered AE86 Hatch.
Making our Datsun Roadsters look big was this Honda TN7 “Kei” pickup:
Euro Classics
Yearning for Porsche’s? Or something a bit less “mainstream”? DWA CnC did not disappoint.
Two Panteras:
Geoff’s 2002 and an E28 M5:
Pretty Alfas:
VWs: Scirocco and a LSx-swapped Caddy!
Austin Healey:
Porsche Galore: 914s, 944s, swb 911s, 991s
American classics as well! Here is a Plymouth Belvedere and International Harvester Travelall:
DWA CnC was definitely my kind of cars and coffee. It’s a great venue with amazing driving roads nearby and the cars were so diverse. We highly recommend checking it out! Thanks to the DWA crew for hosting. If you haven’t already, listen to their podcast and make sure you give them a follow on Instagram.
More pictures in the gallery below!
We met Greg in 2015 when he purchased a set of Panasport wheels for his S30. He returned later in 2019 for our Z Car Garage Big-Brakes and Z Car Garage CV Axles along with upgraded suspension and triple Mikuni carbs. Greg is a pilot residing in Reno, NV and when he is not flying passengers all over the US he is a 100% gearhead with an award-winning 1970 Dodge Charger. He has owned the ’73 Z for 42 years and we love the story behind it:
“I bought this Z from the original family (two owners, same family) just weeks after I graduated from high school in June of 1978. I had previously owned a 1970 Sublime Green Dodge Charger R/T, but I thought it just wouldn’t be cool to show up to college in a ‘lime green’ car, so I went on the hunt for something that had great looks, and great performance to match. I kept my pursuit of a 240Z a secret from my high school sweet-heart (now my wife of 40 years), who was two years behind me in high school, until I had actually purchased the car and had a chance to give it a good detailing. When I pulled up that first evening with the new Z, she was very surprised! See didn’t know what it was, but she thought it was just “So Cool!”
“We dated in the car for another two years until we married in 1980. One of the best memories we have of the car is taking my now wife to her High School Senior Prom in the car. We both also really enjoyed cruising the back mountain roads of Arizona on the weekends during the year I spent in Air Force pilot training outside of Phoenix. The car was my daily driver until 1987, when it received a new paint job and then became more of a “nice day” car.”
As life went on Greg moved from Idaho to Reno and the car ended up getting stored for about 20 years. When their re-acquired ’70 Charger did not make it back from a resto-mod in 2015, Valerie suggested getting the 240z running to enter in Hot August Nights in place of the Charger.
“After sitting for 20 years it needed some work – we called on Dave Rebello for a 3.0 stroker L-28 engine (SU carbs), and while the engine was being built my son and I got busy. We pulled the fuel tank, dipped it, and refreshed it with a new sending unit, as well as all new hoses.”
In 2015 Greg purchased a set of 16×7 Panasport wheels from us and though the Z was really nice it was time to take the next step.
Taking the Z to the next level
After months of planning, last July Greg and Valerie drove their Z down from Reno to Z Car Garage. They spent the day with us while we installed new parts, made a few repairs and cleaned up the engine bay.
The Rebello 3L was treated to a fresh set of triple Mikuni PHH44 carbs on a Harada intake manifold (Rob’s favorite intake). We anodized the linkage from blue to black to suit Greg’s taste.
Out with the old SU carbs. A new 6-into-1 MSA coated exhaust header (merged to existing exhaust system) and ZCG heat shield were installed:
Greg also wanted the fuel hoses and AN fttings black which is becoming common from our vintage racing builds like the Rocketbunny Z. Finishing it off is our favorite fuel rail from Japan.
The engine bay received lots cleanup. We wanted Greg’s attention to detail to match his Mopar’s. Before/After, triples are hard to beat!
Dyno Tuning
After the addition of triple Mikuni carbs and an updated MSD ignition we went through the car to ensure it ran well. With Rob’s dyno tuning we greatly improved the way this Rebello 3L drives. Baseline was 186hp/189tq and after tuning it made 215hp/203tq to the wheels:
Listen to those triple Mikuni’s sing on the dyno. Also watch for a test drive with Rob running through the gears making sweet L-series music!
We sorted a few additional items like repairing the parking brake, replacing a lazy tachometer with a nice unit from Rob’s stash and fixing his shift boot.
Greg was pleased with modifications and repairs:
“One of the not-previously talked about items that I was most pleased with was the Tension Rod Bushings that Rob replaced. After I installed the new front-end parts a few years back, the car still had a tendency to follow slight grooves in the road. I had written this off as non-stock wider tires, but when Rob took the car he noticed it in his test drive and replaced those for us as well. The car now literally drives and handles better than new, and the triple carbs with Rob’s tuning magic REALLY brought out the beast in the Rebello motor! The car’s performance now is quite simply stunning!!!”
As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:
Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)
Rotors: 280mm x 20.6 with Alum 7075 hats
Pads: Stoptech 309 sport street pads
Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.
A few closer detail shots of the calipers, rotors and hardware:
We went ahead got Greg dialed in with the ZCG big-brake kit for small wheels with parking brake and a new 240z brake booster/master cylinder. More pics in the gallery!
Front brake installation:
At the rear, the OEM drums brakes were replaced with our ZCG Big-Brakes. Factory handbrake functionality IS retained! They also look great behind the Panasport wheels:
Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 70 CV axle kits on customer cars and we are stoked with all of the positive feedback.
Greg received ZCG CV Axle set #282.
Enjoying The Ride
After their visit to ZCG, both Greg and Valerie continued to enjoy the Z at several Hot August Nights shows. It appears they enjoy driving it more than the Charger 🙂
“The Hot August Night Virginia City meet this year. We had intended to take the Z Friday, and the Charger on Saturday, but we had so much fun driving up and down Geiger Grade with the new ZCG triple Mikuni‘s and the ZCG Big brakes that we took the Z both days!!!”
Valerie driving the Z to a local ‘Ladies only’ car show. We love her “all blue” theme! (Right) Their 1970 Dodge Charger:
“Valerie and I are very happy with the service and modifications ZCG has completed on our ’73 240Z. I doubt anyone else has the experience, the knowledge base, and most importantly, the PASSION for working on Z Car’s that Rob Fuller and the staff at the Z-Car Garage have!”
We really had a great experience working Greg, thank you both for letting us make your Z car an enjoyable sports car! More pictures in the gallery below:
The fifth annual HSR Classic 24hr race at Daytona International Speedway was held November 13-17. Racing legend John Morton and co-driver Rob Fuller piloted the #46 BRE Datsun 240z owned by team manager Randy Jaffe.
.
Enjoy our report from the event with pictures, video and commentary from Rob and Randy!
Hallowed Ground: #46 Debuts at Daytona Speedway
When the BRE 240z was not accepted into the 2019 Rolex Monterey Motorsports Reunion team owner Randy Jaffe was anxious to find a Fall event. Thanks to Michael Eberhardt of Vintage Racing Co. we were able to run the Classic 24 and share a garage with him at Daytona. It was an amazing feeling sharing the same hallowed grounds where all the pros raced for years.
Rob:“This is a relatively new event and HSR’s efforts to make it larger were clear: the Classic 24 had people from all over the world (1/3 from Europe), and famous drivers and cars everywhere: Gunnar Jeannette, Derek/Justin bell, Jochen Maas, Daytona prototypes, LMP cars, vintage IMSA cars, 935s and big-boy hardware.”
Paddock pictures from top left to bottom right: AC/DC lead singer Brian Johnson with Rob Fuller, Gunnar Racing Team, VM columnist Jochen Maas and a 1955 300SL, 1985 Porsche 962 HR1 piloted by team of Derek Bell, Justin Bell, Rodrigo Sales, and Gunnar Jeannette.
Enjoy this video of the sights and sounds at Daytona:
Racing at Daytona
The Classic 24 race features six race groups with 4 (1hr) sessions and cumulative time deciding the winner. Each session has a 3-minute pitstop with mandatory driver exit during fueling. There were many challenges facing the ZCG team as we prepped the BRE 240Z for big banking of Daytona:
Rob:“Josh Corwin prepped gear ratios for the diff and we went there armed for any scenario. At 3.56 miles, Daytona is much longer than our West Coast tracks so we built a 3.54 and 3.36. After one practice session we realized the 3.36 was needed.”
It was an incredible sight to see the #46Z out on the high banking with serious race cars like the Smith Motorworks 1980 Porsche 935 K3:
To aid driving during night sessions the Z was fitted with LED lamps:
Despite heavy rain the team carried on, making changes to the car and improving with each session.
Rob: “There were 12 cars in our group with a bunch of 911s and 914s. The Z worked flawlessly. We made a last minute carb change, sent pics of the spark plugs to Dave Rebello, and we were pumped for it. The sheer size of the stands and banking was overwhelming but we welcomed the challenge!”
Randy:“As you drive into the infield at Daytona and look at that 31% banking it’s super intimidating and as Rob stated you cannot look straight out of the car as it’s always bending left and he has never experienced that before. Rob did an amazing job of adapting to not only the car but to the track within 2 to 3 laps as he had cut down six seconds plus. John Morton has not run Daytona in over 20 years and he got right in the car and turned a great time which is what professional race drivers do! At 77 years old it’s just amazing how he is so calm and so smooth around these tracks!”
Remember those those mandatory pitstops? Thanks to the ZCG team (Josh/Keith) all stops were nailed and we actually had to wait because we were under time. We also had help from Randy’s friend Barney to help with fueling, and Chris Karl from SCCA. A rally of people excited to see the Z at Daytona all pitched in.
The bad weather and lack of track experience didn’t hold John or Rob back. We started 10th in class in the 1st session and by the end of the 1st leg we were in 3rd place.
From 10th to 3rd in one session is impressive with John and Rob turning near-identical lap times. Rob was ecstatic not only about the Z’s performance, but also being able to co-drive with his hero:
Rob: “Ben from Retrosport with Alan Terpins’ 1979 Porsche 935 MOMO car kicked ass and won their class. They were clocked on the front straight under braking at 188mph. The BRE Z did 156mph top speed and our lap times (Morton and Fuller) were within a .1 of each other. I can’t describe the feeling of going from total fanboy to being a co-driver with John Morton. All of this comes from Randy Jaffe’s generosity, drive/passion to celebrate this car and era. These heroes that were making history and didn’t even know it 50years later. All while a new crop of people that love and appreciate this car. Watching people from all over the world come over to find John Morton to have him sign something, shake his hand, tell him a Datsun story. It’s surreal.”
Unfortunately our hopes of a first or second place finish in class were cut short at the second session. John Morton got an epic start and as they all went into turn 1 on the first lap (at night) a Lola T 70 lost its grip, then a Chevron panicked and cut hard right in front of John. There was nothing he could do and the car was so low that it flipped us up in the air and onto the roof:
John Morton was able to exit the Z safely, without any injuries. The Z was towed in, covered and our race ended. We all had hashbrowns and coffee late night at Waffle House. The next morning Josh and Rob set the tow on the front of the car, took plugs out and turned it over. We actually got to drive it around paddock Sunday morning, knowing we would be back again to take a run at the high banks of Daytona.
Randy: “Most historic race cars have been wrecked so many times and put back together and we will do the same after this Daytona accident. Just a slight bump in the road but we will come back stronger as we have learned and we will continue to write more current history with John at the wheel. We can’t wait until Daytona next year where Rob and John can finish the 24 hour that we started this year.”
Here is a video with in-car footage of both John Morton and Rob Fuller. Enjoy the triple-Mikuni carb’d music and wild banking of Daytona! At the end is multiple-angle footage of the crash:
The BRE 240Z will be rebuilt at Z Car Garage
We welcomed back the #46Z to ZCG for a rebuild after damages from the Daytona crash. Stay tuned for progress updates:
Randy: “The car is being shipped to Z car garage on December 13th for repairs and to prep the car for the Walter Mitty races in Atlanta in April. The most amazing part of the fun we’ve had with this car over the past three years is the excitement that Peter Brock and John Morton have shared with all of us to turn back the Hands of time! I think because of social media John Morton may actually be more famous now than he was back in the day and he often thanks me for the efforts to make his accomplishments recognized over and over which he certainly deserves! What 77-year-old race car driver do you know still flies airplanes and rides dirt bikes, jeeps and works out!! Of course none of this would happen without Rob Fuller and Josh Corwin they have been the glue behind us entire program and I would’ve never done any of this without them. Rob takes control of many situations that could be stressful and makes things easier for me!”
At 77 years of age John Morton is still formidable behind the wheel!
Randy was and continues to be supremely enthusiastic about the Z, John Morton and BRE. His words from Daytona:
“Per usual our pit area always had fans coming up and wanted to know where John was to talk to him and get an autograph as he had raced with many of these legends for the past five decades! I really love the story about Peter Brock and the BRE team and what John accomplished in a short period of time and still lives in high racing lore! Every piece of history from this time s fun for me to gather and collect as all of it is a part of the story!”
Randy and the BRE 240Z Build
While many have seen the BRE 240z at racing events and shows, there is a great story behind this car as told by owner Randy Jaffe:
“I met John somewhere around 2012 and told him I was going to build a tribute to his championship 240 Z car and I’m sure he’s heard that hundreds of times and he was kind of bored with the conversation. Then I started sending him and Peter Brock emails to build it correctly then after I spent several years at an attempt to do a tribute I was with both of them one night and asked about the real story on the remains of the original car. Both of them looked at each other and back at me and I was like – what was that look for? They went on to tell me that the story I had heard for years about the car being totally destroyed and no longer around was not true. Dan Parkinson who lived about a hour and a half north of Los Angeles had the remains of the car that he had re-bodied after a 1977 ball joint failure at phoenix motor Speedway. Casey Mollett – another Datsun racer back in the day was a few hundred yards behind Dan Parkinson when he hit that wall and he was part of the teardown and reassembly to the 1977 to 80 Z that Nissan gave Dan to rebuild a car. They were going to repair the original 46Z which now wore the number five livery of Dan Parkinson but the painter said it would take a month and a half to two months and they had to race in a few weeks so they use the 1977 280 Z that Nissan gave Dan.”
“The long and short of it is that they raced the 1977 shell for a few years and retired the car and racing in 1979 and all of those parts just sat there until 2016. Dan and I have had conversations for over a year and many many people were trying to buy these parts because they knew what they were but for some reason he felt comfortable and asked me one day do I really want all the stuff and of course I said yes. John Morton actually said since he owned the original chassis plate which he had taken off the car when he installed the remote Traco oil filter back in 1970 he kept that Vin plate in his toolbox until he gave it to me at the Petersen Museum in 2016. I had already completed my car as a tribute to the BRE team and John Morton when Dan sold me all of the surviving pieces. I then ripped the entire car apart and installing every little piece I could that had integrity and that’s when Rob Fuller stepped in to finish the car build like it was back in the day.”
Pictures from the race prep of Randy’s Z at Z Car Garage:
A sampling of the original parts is shown below including the exhaust header with megaphones, SW gauges, and BRE remote oil filter/cooler. Original BRE heat shield and fuel block pictured above. All assembled by the crew at ZCG prior to testing:
Randy’s fanatic attention to detail and our team’s prep culminated in John Morton enjoying the Z at several race events:
“So many of the remaining pieces along with the 1971 championship motor is on display at my shop. After going to a few shows with John Morton in the car I told him I wanted to race it and he kind of smirked and said it’s a show car not a race car and my reply was we’re gonna race it will you drive it and he Sylvia was nonchalant and said yeah maybe… when we signed up and got into the first Rolex reunion in 2017 Rolex Monterey Motorsports Reunion.”
“John wasn’t really excited about racing the car Rob and I could see that even when he got belted in the car. When he came back after 6 to 8 laps a different man had returned he immediately walked over to Sylvia and said what are my times – He knew he was turning really fast laps and was getting really fired up! He told Brock down at the Carmel car show that the show car was truly a fast racecar! That weekend he terrorized all kinds of Porsches including 935s and was running up front in the top 10 out of a group of 40 to 50 cars. This became really fun so we’ve done it now at Road Atlanta Laguna Seca and now Daytona!”
Big thanks to Randy Jaffe, Sylvia and John Morton, the ZCG team Josh and Keith Corwin, Meghan Fuller, Michael Eberhardt and Vintage Racing Company and HSR this was a memorable event we can’t wait to come back to next year. More pictures in the gallery below:
Rommel came to Z Car Garage in 2014 to have work done on his 2013 Nismo 370z. He’s a big car enthusiast with a Camaro ZL1 and Viper ACR and after a few years he reached out to us about his 1971 Datsun 240z.
The Z had an EFI setup with Megasquirt and would not start. He made an appointment with us and got the car towed here where we found an ECU failure. Rob and Mel discussed doing an upgrade to Haltech and fixing all the things wrong with the car from sorting the suspension, better braking and engine bay cleanup.
Mel was hesitant to do everything all at once, yet we wanted to avoid future trips back to the shop. Jokingly, Mel said what “I’d really like are some ph44 Mikuni’s.” Ask and you shall receive as Rob had a set ready to go. So we cancelled the tow truck and made a plan to go back to vintage.
All of the existing EFI parts were removed from the car. We hooked Mel up with a Harada intake manifold, triple ph44 Mikuni carbs correctly setup for his 2.8 engine, a ZCG heat shield and corrected all fuel system issues:
Often utilized on vintage race cars, the fuel lines were plumbed from a junction block on the firewall. Black AN fittings on black fuel lines supply each carb:
We think the new triple Mikuni’s look much better than the old setup!
The existing fuel pump system (Left) was removed and a cleaner Holley setup installed:
Dyno Tuning
Aside from the exhaust header, this is a stock 2.8L engine running Mikuni ph44s. With timing and A/F adjustments we picked up more power making 150hp/167tq to the wheels:
Listen to those triple Mikuni’s sing on the dyno:
Minor Sorting
The rear fenders were cut badly to fit flares, revealing an inner fender gap that would allow air/fuel vapors to entire cabin:
We pulled it back, welded the metal and sealed everything up. The exhaust was also rubbing at the rear valance so re-fitted it.
Chassis
The chassis was treated to a suspension refresh. We installed lower adjustable control arms and T/C rods from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff. They make some of the best suspension parts out there for Z cars. Lower control arms replacing OEM parts:
As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:
Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)
Rotors: 280mm x 20.6 with Alum 7075 hats
Pads: Stoptech 309 sport street pads
Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.
A few closer detail shots of the calipers, rotors and hardware:
We went ahead got Mel dialed in with the ZCG big-brake kit for small wheels with parking brake and a new master cylinder. More pics in the gallery!
Front brake installation:
The ZCG brakes fit under the 15×9 Atara Racing wheels:
At the rear, the existing old-school disc setup was replaced with our ZCG Big-Brakes. Factory handbrake functionality IS retained!
Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 70 CV axle kits on customer cars and we are stoked with all of the positive feedback.
The differential area was a mess on Mel’s Z. We corrected the side-flange issues with his R200 and installed our CV axles. Stock half shafts (L) and ZCG units:
Vintage is Best!
Once running we performed a full alignment and dialed in the brakes. Mel’s initial feedback on the car made us happy:
“Well, I’m very happy how my car turned out after picking it up from ZCG. Hearing my baby runs on old school NA triple carbs is very heart warming, the ZCG Big-Brake kit is amazing, the CV axles are beefy and the suspension tweaks made a lot of difference on handling. I can’t thank Rob enough for what he did to my Z. It feels like a totally different car now (in a good way) compared to when I drop it off. Job well done ZCG! Thank you for taking care of my 240Z ZCG. 👍👏🙏”
This was a very rewarding project and we are excited to see Mel’s Z evolve into a well-rounded sports car. He’s already thinking about his next upgrade…a 3.0 or 3.2L motor. Thanks for bringing your Z to us Mel! More pictures in the gallery below.
