Dear Zcarblog readers, it’s been a busy year and we are catching up on blog posts. Please enjoy our belated race report from November 2023.

WE LOVE RACING! On November 10-12 we attended the Velocity Invitational at Sonoma Raceway. Z Car Garage had a blast racing and supporting clients in Group 6 (1968 – 1978 IMSA GT Cars), Group 9 (ALMS) and Group 10 (Mini vs Mustang Enduro). This vintage racing event was just as fun for spectators with a friendly, immersive vibe. Enjoy our report from the weekend with photos and in-car video of the action.

Z Car Garage Racers

 

#49 IMSA Joel Anderson GTU Z

Rob Fuller piloted the #49 Joel Anderson IMSA GTU Datsun 240Z

 

Porsche 997 GT3 Cup

This very special Porsche is the 2006 FIA European GT3 Championship winning car that was driven by Sean Edwards. It is a 997 GT3 Cup S Prototype and our client Kenny Tse raced it in Group 9 (ALMS). Listen to this car on the Z Car Garage dyno below!

#78 IMSA Porsche 911

 

Z Car Garage prepared and provided trackside race support for our client Kelvin Tse and his IMSA Porsche 911, running with the Z cars in Group 6.

Mini Vs Mustang Enduro

Rob Fuller and Greg Hoff raced a Mini Cooper against Mustangs in the Group 10: 1960’s Mini Vs Mustang Enduro, this was an action-packed group!

  

Race car driver, restorer and Datsun Historian Glenn Chiou raced his FAR Performance 240Z. This Z has a very rich racing history, driven in the 70’s by Loren St. Lawrence in VIPS Restaurant livery.

 

Racing With Group 6 IMSA

Photo by Chris Constantine

Group 6’s IMSA cars were dominated by big-power Porsche 911 RSRs with a few BMS CSLs and four S30 Datsuns. Rob Fuller ran the #49 Joel Anderson IMSA GTU Datsun 240Z joining Dave Stone’s 260Z, Gary Cook’s CP 240Z and Glenn Chiou’s’ 240Z:

 

#49 IMSA Joel Anderson GTU Z

 

This was Z Car Garage’s third time running the Velocity Invitational event. Enjoy Rob Fuller’s race report with video below…

ROB: “The IMSA GTU Z made a switch this season from Avon to Goodyear tires, and it’s really been quite amazing. You have to remember that all of the suspension on this 240Z is what Joel ran in 1981, and it still rocks. Group 6 was fun and I was in the mix with legends…spent the last 20 years attending the Historics watching Bruce Canepa in his Porsche 935, Ken Epsman in his DeKon Monza, the Greenwood Corvette…just unreal to be actually racing with them!”

 

ROB: “My personal best lap time was 1:46 and I think that is the highest finishing Datsun 240z ever in that group. Shoutout to Glenn Chiou in the BADD Z he kicked some ass, Gary Cook brought out an old CP car and Dave Stone was in his GTU 260Z.”

Enjoy these shots of the #49 car in action by photographers Kris Poulin, Chris Constantine and Charles Frerking:

   

Video!

We have in-car video from Rob in the Joel Anderson IMSA GTU 240Z and Group 6 racing action below, volume up and enjoy!

Sunday Race:

Catch some Turn 2 action HERE and watch more of Rob’s racing adventures on his YouTube Channel.

 

Z Car Garage Trackside Race Support Services

ROB: “ZCG provided trackside support for 4 cars. Kelvin in IMSA 911 and myself in G6, Kenny in G9 ALMS with a bunch of 996/997 Porsche Cup cars, Ford GT’s and really cool metal. They all had a blast. We changed up a few things on the IMSA 911 and solve some issues that came up at Rennsport so he was able to have a good time at Velocity.”

 

Kenny with his 997 GT3 Cup car and first time on track since 2018. Z Car Garage prepped the car with fluids and dyno tuning, and wow what a car:

 

ZCG is always willing to lend a hand to fellow racers, like Dave Stone:

 

Mini Vs Mustang Enduro

 

ROB: “We also ran a Mini with Greg Hoff in the Enduro. The Mini kicked our ass all weekend and we had to do an engine swap (thanks to Nick for the assist!)…we had electrical woes. British Steel really challenged us and thanks to the ZCG crew we were able to catch the last Enduro race and take the checkered flag.”

 

Paddock Action

Enjoy this video highlighting the Sonoma Raceway paddock with race group walk-throughs, engine sounds and more:

Exotic cars

 

There was no shortage of rare and exotic cars from well-known and upcoming supercar marques. Guntherwerks had their 911 Speedster and McLaren showed off an incredible display of F1s mixed with newer models:

 

Privateer Spirit

Our friend and Datsun Historian Glenn Chiou raced his FAR Performance 240Z. It’s worth noting that not unlike privateers of the period, Glenn builds his race cars, maintains and manages racing efforts himself. Not an easy task so we applaud his work ethic. Glenn builds some beautiful Datsuns and we will highlight his B-Sedan 510 soon!

 

A Fan-Friendly Race Event

 

Formerly known as the Sonoma Speed Festival (2019), the Velocity Invitational re-imagined the vintage race experience with a Goodwood-inspired vibe that we enjoyed at the 2022 Velocity Invitational. One of the best experiences for spectators is the paddock and organizers made access to drivers and their machines seamless. Fans could get up close and personal with race cars without the typical ropes or 45-foot RVs in the way:

 

ROB: “First time running at Sonoma for us with VI, since we missed the inaugural event in 2019. Jeff O’Neill ‘s event is first class and reminds us of what the Rolex MMR used to be. So much excitement in the air…when you drive in people would be everywhere. Thanks to Jeff, Ryan Turri and Ardelle Lind for accommodating our needs.”

 

“They have done an incredible job making the guests and fans welcome. Organizers created a memorable experience, down to the driver’s meeting and we really enjoyed the paddock design, signage, F1 energy. All three days there were lines to get into the event! More driver amenities like the lounge, food and drink…ZCG’s first shop helper Jeff Garcia and his company was in charge of coffee/drink services at the event, small world!”

 

The hot pit area where all run groups stage before heading out to the track is an amazing place to be. Typically, access is only granted to pit crews and media. At the Velocity Invitational however, organizers staged a “false grid” where any spectator could walk amongst the race cars.

  

If you want to see action from the event in its entirety, check out Goodwood’s live streaming coverage of Day one and Day Two. Huge thanks to Meghan Fuller for capturing photos/videos for ZCG. More photos in the gallery below!

ZCG Race Crew

 

Huge shoutout to the Z Car Garage race crew including Josh, Meghan, Nick and Cooper. We are grateful for your support, keeping us safe and on the track!

   

Racing into 2024!

 

Thank you Velocity Invitational for an incredible event. We look forward to running with you again. Join us for the 2024 race season starting March 1 with SVRA at Thunderhill. See the ull race schedule below and LONG LIVE THE Z!

 

…[read more]

 

Our Z Car Garage Big Brakes have been winning over Z-car enthusiasts locally and globally. Jason purchased a set for his 1974 Datsun 260Z and performed the installation himself. Before we go into his Big-Brake experience let’s hear his Z-story…

 

JASON: “I first heard about Z Car Garage by following Larry Chen’s 240z build on his YouTube Channel. I saw his various interviews with Rob Fuller and was really impressed with his knowledge and passion for the Datsun 510 and s30 chassis. Quickly, I started researching more about the pain points of the s30’s, and noted the lack of support from many other companies in the area of suspension and braking locally. The kits available were Wilwood, Endless, Star Road, among others. No complete kits that were torture tested and raced like what Z Car Garage was doing with their ZCG CV Axles , Brake Kits and other components they were selling. Research and development are key to me, and I was thrilled to see ZCG taking this on themselves. In addition, Rob is a real human being who’s on top of answering questions via email and in person at Z car events. That’s a HUGE deal to me, and it’s so rare to meet someone that of course is just as passionate about his cars as the enthusiasts building them.”

 

“My 1974 Datsun 260z is an Early model s30. When I purchased it, a few years ago I quickly removed the stock seats and reupholstered Recaro LX vintage seats in Black. I loved the netted headrest, and the clean recaro stitching at the center of the seat. I also removed the Greddy Oni wheel that was originally in the car and swapped it out with a new old stock Nardi Nismo Deep steering wheel with a Black and Gold finish. I went through the interior and purchased a NOS Datsun center console, and replaced the stock door cards with Skillard flat cards with leather pull straps.”

 

“In addition to the door cards, I added Skillard powder coated heel plates. The car came with BC adjustable coil-overs and Swift Springs which I will be updating in the near future. The BC Coilovers are perfectly fine for the street applications I’m using the car for currently. My suspension underneath the car is the full T3 catalog including the power cradle, control arms, bushings, and even their steering elements. It’s finally sorted, and I really enjoy driving the car the way it currently feels.”

 

“The car is equipped with a L28, ZX 5 Speed transmission, and 44pHH Mikuni triple carbs built by Taka at Kyusha House. The header and exhaust system are Fujitsubo Legalis R. The engine has since been updated in every way from the ignition system, oil pump, spark plug cables, and brake new seals and belt. The oil pan was replaced with a Moroso baffled racing pan with higher oil capacity.” 

  

“I have two sets of wheels and tires for the car. One set is Volk Racing TE37v custom gold 15×9 at 0 offset on Toyo Proxes R888 205/50/15, and the other set is Work Racing Equip 03 15×8.5 at -3 offset custom bronzed lip, and Gold Center on Falken Azenis RT660 205/50/15. The front bumper is a carbon MSA, and the rear tail light bezels are carbon fiber made by Vintage Carbon. The wing is a Carbon Fiber BRE spoiler.”

 

You can see Jason’s Z in action in the video below:

 

Z Car Garage Big-Brakes

  

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

  

Big-Brake Kits Available For DIY Install!

Z Car Garage is proud to offer our Big-Brake Kit to Z-Car owners that want to perform the installation themselves. We can ship worldwide and each kit contains everything needed with a comprehensive (40-page) installation guide. Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE. Enjoy these pictures of Jason’s beautiful S30 and his ZCG Big-Brake installation:

 

Our ZCG Big-Brake kit ships with everything needed to install and retains the factory parking brake function. Jason successfully installed the BBK on his Z with PitstopMotorTuning, and they look great behind both the Work Equip 03 and Volk TE37 wheels:

    

Beyond ease of installation and quality components, our Big-Brakes perform by offering superb pedal feel…everyone that drives our demo Z confirms! This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. Jason shares his feedback after replacing his existing Wilwood brakes with the ZCG BBK:

JASON: “The Stoptech ZCG Big-Brakes are really a solid kit. The lead time was pretty rough, but again Rob reassured me every month over the course of a year of waiting that it would be worth it. He was right! These brakes do not disappoint. Once the kit was completely bedded and broken in, I quickly put the brakes to the test on Angeles Crest highway here in Los Angeles. I know this road well, and that’s where I usually push the car at a safe limit, and see where the pain points lie. The ZCG brakes are worth every penny. They are precise, they are confidence inspiring, and also feel great under late braking situations. I had a blast carving around the canyon knowing my brakes would safely hold up. My next test would be to get a couple of track days on them, and see how they hold up under extreme conditions and multiple sessions.”

 
What’s in store for Jason’s Z?

“The goal for the 260z is to refine my current setup. The paint is a bit rough since it was a garage paint job, and I would love to repaint the whole car including the interior. At the moment, I’m building a high compression 3.1L stroker motor with Jenvey 50mm ITB being managed by a Haltech Elite 750 stand alone ECU. My goals long term are for big power, but with street car reliability. I would love to confidently do a track day, but also be comfortable driving my wife to car shows, and even to grab a cup of coffee together. The engine has a custom designed valve cover designed by myself, and commissioned to be created by BSpeed in New Zealand. Big updates to come in the new year!”

 

Thanks for your support Jason we love that you are Enjoying The Ride and Long Live The Z! More photos in the gallery below

The Last Stop in Braking for your Z

 

Z Car Garage Big Brakes are one of the best systems available for your S30 Z Car with over 200 kits sold worldwide and unanimous positive feedback. See our ZCG Big-Brakes on client cars HERE and enjoy the photos below:

    …[read more]

 

We love to see our products being installed and used on client cars. Armon is running our Z Car Garage Heat Shield in his 1973 Datsun 240Z that he rescued and restored on his own.

 

ZCG Heat Shield

 

We are excited to offer the Z Car Garage Heat Shield for your triple-carb’d L-series Z car. This is a one-piece 304 stainless unit with laser-etched serial number. Proven on all of our L-series engine builds and dyno testing.

  

This heat shield will fit Mikuni, Weber, Dellorto and Jenvey induction with several intake manifolds like the Harada. Also available for 4-cylinder L-series applications as well!

 

The ZCG Heat Shield is available for purchase with product information below. View this product and other ZCG parts on the new “products” page of our website HERE

 

Save Classic Cars

Armon is a car enthusiast passionate about keeping classic cars on the road. “Save Classic Cars” is a platform he created to share his love for vintage metal and foster the DIY spirit in others. You can catch his adventures on Instagram. Let’s hear from Armon himself about the rescue of this 1973 Datsun 240Z…

 

The Rescue

ARMON: “I actually remember looking into 240z’s when I was 16 years old- I’m 28 now. At the time, I wanted something classic that I could tinker with and drive throughout high school. Most of the Z cars listed for sale had some level of rust, which in hindsight, was nothing compared to what I would eventually get my hands on. I eventually gave up and ended up buying a classic mustang (then another, and other, etc). I still wanted a Z car, but didn’t actively search for one due to the price- the days of the “cheap” 240z were long gone in my book.”

 

“Last August (2021), I went on a walk in my neighborhood with my Dad. We spotted a Z car tucked away behind a pile of firewood just 800 feet from my house. I came back the next day and introduced myself to the neighbors- the gentleman who owned it bought it in 1989, paid someone to tune it (which made it run worse), and subsequently parked it in 1991. The car sat there for 30 years and became one with the earth- it had sunken into the ground, a tree had grown up next to the door, there was moss growing on the paint, rodents living/dying in it- the poor thing was a mess. The owner told me he wanted to sell it- I got excited and bought it on the spot (in hindsight, I probably should have at least opened the hood).”

Bodywork

 

“With the help of a few buddies and a truck, we dragged it out of the ground and down the street to my house. It turns out the person who did the tune up didn’t gap the points. It was running the next day, I actually drove it to the previous owner’s house the following week. The car ran incredibly well- someone had swapped in an L28, regeared it with 3.90’s and added the Mulholland suspension package.”

 

“Beyond that, it was an absolute mess. Floors, firewall, frame rail, floor supports, toe boards- all toast. It had been hit hard on the passenger side and poorly repaired. I fell in love with this car after driving it, I decided that I wanted to keep it and fix it. I stripped the car down to a shell, built a frame jig, and made the car whole again; literally. Oh, all of the metal work and mechanical restoration was done in THREE months. As fun as that was, I think I’m going to need a little break before I take on something like that again.”

Drivetrain and Chassis

 

“The cylinder head was rebuilt with a more aggressive cam and larger 280z valves, triple-Webers, and then completely resealed. Many Z enthusiasts mentioned adding a heat shield- I didn’t think much of it until I watched one of my Weber’s drool some gas onto the headers. A quick email to Z Car Garage and I was on my way home with a new heat shield! It looks great and keeps the Webers cool.”

Close-up view of the Z Car Garage Heat Shield beneath Armon’s triple-Weber induction setup, this unit is serial#00258:

 

With the engine taken care of, Armon added T3 front control arms, T/C rods and ST springs (courtesy of ZCG) along with replaced bushings throughout:

 

“I then sourced a 280z 5 speed and some Datsun comp style seats- my crusty (but solid!) go kart was ready to take on the world. Future plans? Continue flogging it! I’ve been driving my 240z every chance I get. I’d like to grab some stickier tires and hit some track days, it’s been an absolute blast to drive around town and in the mountains.”

Enjoying The Ride

 

We love that Armon drives his Z everywhere. He’s joined us on local events and gatherings like the Breakfast Club Rally. Their “Tokyo Calling 3” event (above) was ~300miles of fun through beautiful Sonoma backroads. (below) Meeting up with our client Dirk and his 1973 Datsun 240Z:

Armon followed through on his plan to track the Z, enjoying it an HPDE at Thunderhill Raceway. He also took the Z to an Autocross event at Sonoma Raceway.

 

Enjoy this video of Armon’s 240Z in action…

 

More photos of Armon enjoying the Z after rescuing it are in the gallery below…happy to see him at Nick’s birthday party:

 

Alexey Orlov captured the sound and experience of driving the Z in this video below:

It’Z a Small World

 

Z-car ownership often comes with some interesting stories from previous stewards. Armon was reunited with a former owner of his Z and it’s neat story:

ARMON: “That’s not just any 240z. That’s MY 240z! I recently met with the gentleman who owned my 240z from early 70’s to 1989- it turns out he lives half a mile away from me. He gave me the full story and sent me a few pictures from back in the day- it’s incredible. He [John] bought the car from the original owner not knowing of all of the hidden accident damage, then had a buddy weld it up (he never looked back, the car drove fine). Every few years, John would get bored, strip the car down to bare metal, and repaint it a different color in his parents garage. It’s been metallic brown (original color), red, yellow, green, black, and white- all with psychedelic 70’s stripes and graphics. He swapped in the L28 short block when the original L24 died and he would go to the legendary FAR Performance to buy his parts.⁣”

⁣
“John was very excited to see his 240z in person after parting ways with it over 30 years ago. Every time he’d see something on the car, he would remember another story- it was incredible. ⁣The best part? He’s a Bay Area local and used to take this 240z up highway 9 and Alice’s regularly. It’s truly come full circle. This car is a textbook example of why classic cars are more than just…Cars! I’ve been an advocate for these things for a long time and I will never stop spewing my classic car propaganda. They bring people together, build communities, and remind us of good times. SAVE CLASSIC CARS and keep them on the road where they belong!⁣”

 

Thank you for your support Armon we are happy to see our Z Car Garage Heat Shield on your S30. Long Live The Z!

…[read more]

 

We love to see owners installing our Z Car Garage CV Axles in their vintage Nissans and Datsuns. B&T Performance Retro in Thailand is running a set in three of their iconic, right-hand drive cars: a 1971 Skyline 2000GT, Fairlady Z and Kenmeri Skyline:

 

Z Car Garage is proud to offer a CV axle conversion kit for your Datsun S30 and 510. We have sold over 200 sets of axles globally, with customers installing and enjoying them on everything from street cars to full-blown IMSA racers. These CV axles will help transmit power to the ground and ensure smoother operation compared to your standard half shafts.

   

For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft. These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars. Each axle has a serial # for peace of mind and the kit comes with everything you need to install on your car.

Hakosuka Skyline

 

This 1971 Nissan Skyline 2000GT-X was restored by B&T Performance Retro featuring a 3.0L L-Series with triple-Weber induction:

  

Owner Longlom Bunnag sent us a few photos the Z Car Garage CV Axles installed:

 

We love his motto of “This is built to be driven hard, not just for taking still pictures”. Indeed, this Hakosuka sees regular track time. Enjoy this short video clip of the Hako in action:

 

Fairlady Z

 

This RHD FairladyZ features a stroker L-Series with triple-Weber induction and Z Car Garage CV Axles. Like the Hako above, it is also driven in anger:

 

Kenmeri

 

B&T Performance Retro also restored this 1973 “Ken and Mary” or “Kenmeri” Skyline. It features a similar-spec’d 3L L-Series and 5-speed transmission with Z Car Garage CV Axles. More photos in the gallery below:

 

We love seeing our parts installed and enjoyed, thank you B&T Performance Retro for your support! You can see more of their work on Facebook , and read below for more information on our ZCG CV Axles:

ZCG CV Axles

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. These are 100% bolt-in replacing your half-shafts and does not use aluminum adapters commonly found in aftermarket units. We have over 200+ CV axle kits on customer cars and we are stoked with all of the positive feedback.

  For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft.

 Designed and manufactured locally with KAD Models, the ZCG CV axle kit works in both R180 and R200 configurations.

 These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars (powershifting, clutch dumps, etc.). Each axle has a serial # for peace of mind:

The CV axle kit is available now from ZCG for 1595.00 + freight and they come with everything you need to install on your car. Contact us at 408-452-0350 or send Rob an e-mail rob@zcargarage.com to purchase. Installation is just like doing a half-shaft: there is even a marking that shows you where to line up bolts and special hardware:

The ZCG CV Axles in action

The video below demonstrates the “looseness” associated with aftermarket CV axles that use adapters compared to the ZCG axles without adapters. Several customer race/street cars running our CV axles are also shown. Enjoy!

 

Enjoy this video made by our client Hazel. She installed our ZCG CV Axles on her Hazel’s 1970 Datsun 240Z

 

Over 200 sets of our ZCG CV Axles are installed in client’s cars all over the world:

Supermachine in Tokyo, Japan is running our Z Car Garage Big-Brakes and Z Car Garage CV Axles in their Series Datsun 240Z:

 Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!

 Racer Brad H is running ZCG CV Axles in his IMSA GTU race car:

 Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:

 Set #247 – installed April 2018 on the 260z

 Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.

  …[read more]

 

The shop is busy dyno tuning, servicing and upgrading Z cars. Enjoy this brief update from Friday, December 15th.

S30 Z Cars

 

Rashid lives in Dubai and his Datsun 240Z is getting 3.2L L-Series with pH44 Mikuni induction and exhaust header, ZX 5-speed transmission, OS Giken 4.11 LSD, Z Car Garage KW coil-over suspension, our Z Car Garage Big-Brakes (Stoptech) and 16″ Panasport wheels:

 

David’s 1972 Datsun 240Z is getting a Rebello 3.0L, 240SX 5-speed transmission and 4.11 OS Giken LS. It is also getting our Z Car Garage KW coil-over suspension and already has our V1 (328m) Z Car Garage Big-Brakes. Both cars will feature the T3 steering rack that we are big fans of:

 Both Ryan and Beau’s Datsun 240Z cars left the shop recently. Ryan’s Z has LS3 V8 power while Beau’s 1976 280Z has an L28 with stock EFI. Both cars feature our Z Car Garage Big-Brakes (Stoptech), Z Car Garage CV Axles, Recaro Specialist seats, A/C and dyno tuning. Full features on both coming to zcarblog.com!

 

Lou’s Datsun 240Z came in for mechanical sorting. Excited to share his story on zcarblog as Larry also races with us:

 

Nissan 300ZX (Z32)

 

We have several Z32 NA and TT cars currently at the shop. Gary’s Twin Turbo (above) just got a new set of BBS LM wheels. Full update on this car soon! Paul Ferrari returned to ZCG since we completed his Epic Z32 Build in 2017. He’s ready for ethanol, after running this car on race fuel for many years. We will be installing dual fuel pumps, BDE top fuel rail and all the fixings:

Kevin’s Slicktop Z32 is in for a driver’s side window replacement and some touch-up. Love this Z with WORK wheels and Stoptech Big-Brakes:

 

Hakosuka Skyline

 

Sebastian’s Skyline is at the shop and we are doing a suspension refresh, engine work adapting our Z Car Garage Big-Brakes (Stoptech) to this Hako. We hope to offer this in the future for C10 clients. We hope you enjoyed this shop update, stay tuned for more on zcarblog.com and LONG LIVE THE Z!