The 2022 Japanese Classic Car Show was held on September 10, in Long Beach, CA. This is the original vintage Japanese-car event in SoCal and in its 17th year, JCCS has grown incredibly. Over 20k spectators enjoyed 300+ cars in displayed at Marina Green Park.

 

The vehicles themselves remained a fantastic blend of stock, modified and restored. This is the most important show for Japanese cars, and Z Car Garage keeps coming back every year to soak up the sun, see old friends and drool over some spectacular vintage builds. Here is Rob’s report from the show, enjoy!

 

Rob grabbed a last minute flight to SoCal and joined our good friend Jan Trondsen to check out JCCS. We have watched this show grow and change venues over the last 17 years and it never disappoints.

“It’s one of our favorite car shows. The people, the cars are always on point. I gotta give a huge shoutout to to Terry and Koji for the tremendous work they do throughout the year to make this event a success. I saw so many people from out of town and for good reason…it’s a must see.”

 

Rob was a guest of Nissan and enjoyed a “dawn patrol” viewing of the show before the general public . It was fun to see everyone setting up. We spotted two of Sung Kang’s Z car builds, FuguZ and DocZ. Last year Sung visited Z Car Garage, driving “Mrs. Butters”, our 1971 Series 1 240z shop demo car. After driving Butters, Sung wanted the exact same Z Car Garage Big-Brakes (for small wheels), Z Car Garage CV Axles and KW suspension on his very own FuguZ!

   

Sung was so impressed with the Z Car Garage Big-Brakes that he also wanted a set on his latest 240Z build, the “DocZ”. We happily obliged, only this time we shipped the kit to the Erick of Erick’s Racing, the master builder behind DocZ. We love seeing our parts on client builds!

 

Rally Legend

 

We were happy to see Tom Knudsen’s 1970 Datsun 240Z WORKS Rally Z at JCCS. There was a crowd around it all day! We first saw this authentic time machine back in June at the ZONC 50th Anniversary Celebration.

   

This is chassis #2 of 4 that were built by Nissan for the 1971 Monte Carlo Rally.  It is the project of Tom K and noted Datsun expert Steve Pettersen and their restoration website is a must-visit for history and feature documentation (as shown above). The Z remains largely intact with original parts like the Nissan competition exhaust manifold and roll bar. Period-correct parts like the Ikeda Bussan rally seat and reclining navigator seat were sourced. Check out the heater-port to defrost the headlight covers, Nissan-branded acrylic windows and more.

280ZX-R

 

This 1979 280ZX-R is rare, with only 1009 units produced. The owner, Victor wanted a Datsun and went down to the dealership, had his mom co-sign and purchased it brand new!

 

Z32

 

300ZX (Z32) models were present in stock and modified examples

 

JDM Gems

 

This R32 Skyline GT-R impressed us with a stunning wheels fitment sporting BBS E88s. We love non-Nissan cars and JCCS showcases such a great variety that we don’t get to see everyday. Mazda RX-2s, RX-3s, Honda s600, the list goes on! More photos in the gallery below

 

People

We love hearing vintage owner’s stories. See more of the Erin’s father/daughter project 280Z on Instagram.

 

Always good to catch up with friends, local and from out of town! Positive vibes all around.

 

 

project_240Z with his survior 280Z

 

Special shoutout to our clients Ben and Vince.They drove down from the Bay Area together in Ben’s 1974 Datsun 260Z for an epic roadtrip:

 

Ben was happy with the Z’s performance and he’s sending us photos from the roadtrip soon:

“Hello Rob,

I hope all is well. I am sending you this stellar pic of you with Tom’s Works Z!!! Vince and I had a great time at the JCCS and it was great seeing you. My Z drove so well with not one hiccup! In the heat too. Thanks for building an awesome car. I am really enjoying it. Have a great day, Ben.”

 

Thank JCCS!

 

As with past JCCS events the day went by too quickly. Thank you to Terry and Koji for hosting another great show. Enjoy our photo gallery below.If you missed last year’s JCCS check out our report from 2021 HERE .

…[read more]

 

Love for the Z is strong in Northern California

The Z Owners of Northern California (ZONC) is one of the oldest Z car clubs in the nation. In its prime they had over 600 members with close ties to Yutaka Katayama (“Mr. K”) and Nissan USA. We had a wonderful time attending their 50th Birthday Celebration at the Blackhawk Museum in Danville, Ca on June 5, 2022.

 

Despite some morning rain the turnout was impressive for a relaxed gathering. No judged car show or awards, just Z-Car fans catching up with old friends and meeting new enthusiasts. (above) Aerial photos by Bryan Delohery.

Highlights from the show

Still to this day, 240Zs are the most represented model in the club. Expansion over time currently includes all recent Z models and the GT-R, but also reaches back in time to include the Datsun Roadsters and 510s.  For their 50th Birthday Celebration, ZONC assembled a “generations” display in front of the museum with samples of S30, S130, Z31, Z32, Z33 and Z34. Sitting front and center was the 2023 Nissan Z!

 

Racing History

 

A selection of Datsun race cars also joined the “generations” display. Datsun 510 guru and racer Troy Ermish displayed his 1971 B-Sedan 510 “Penny”:

 

Race car driver, restorer and Datsun Historian Glenn Chiou displayed his FAR Performance 240Z. This Z has a very rich racing history, driven in the 70’s by Loren St. Lawrence in VIPS Restaurant livery.

 

Glenn has vintage raced this Z at several high-profile events. He turned a track-mishap into an opportunity to perform a total-restoration (again) and bring this Z back in “Bay Area Datsun Dealers” livery as raced by FAR Performance privateer Walt Maas.

 

Rob Fuller of Z Car Garage displayed his #49 Joel Anderson IMSA GTU Datsun 240Z. An interesting note, both Glenn and Rob’s race cars have ties to ZONC gatherings decades ago.

 

Linda Williams’ 1972 Datsun 240Z OMS Pace Car Duplicate was staged next to the #49 IMSA GTU race car (the original OMS Pace car). Z Car Garage revived this historically-significant Z from its slumber to make it a nice driver for Linda while retaining its survivor status. She loves driving it everywhere.

 

The New Nissan Z!

 

ZONC teamed up with Nissan to display the new 2023 Z as part of the “generations” display in front of the Blackhawk Museum. This is the Performance model sporting a 6-speed manual and Passion Red paint. And Z Car Garage got to drive it back to our shop at the end of the event!

 

Z’s, 510s, Roadsters and More!

 

Here are a few of my favorite S30 Z cars from the gathering, starting with this flared beauty on Watanabe wheels:

 

Flared Series 1 Z with G-nose and Works-style wheels:

 

We were pleasantly surprised to see many Z Car Garage clients so let’s take a look at what they drove. Ed B is the original owner of this 1971 Datsun 240Z ZCG has maintained for almost two decades:

 

Bob Russell is the original owner of this S30 we will have a full report on zcarblog soon!

 

Representing the G35s were our clients Larry and long-time client Jason:

 

Eugene and long-time client Craig showed their 350Zs:

 

 

Richard M’s ZCG-modified 370z was representing Z34s

 

Here is a video from the 50th Birthday Celebration with load-in of the #49 IMSA Datsun 240Z, walk-around of the displays and the new Z leaving, enjoy! More highlights below…

 

260z and 280z

 

S130

Who could forget the S130 280zx! We spotted 4:

 

Z31

Three Z31s, including David’s sweet 25th Anniversary edition. This was his first ZONC event, welcome and thanks for bringing your Z out David!

 

The Works Rally Z

 

In the middle of freshly painted/detailed Datsuns and Nissans was this rather dilapidated S30. Upon closer inspection viewers were treated to the tremendous revival of this real-deal Nissan WORKS rally car. Recently I had just posted a blog report on Randy’s East-African Rally Tribute, so seeing an actual, surviving rally car in person blew me away. We all geeked out pretty hard on the details, and they were impressive:

 

This is chassis #2 of 4 that were built by Nissan for the 1971 Monte Carlo Rally.  It is the project of Tom K and noted Datsun expert Steve Pettersen and their restoration website is a must-visit for history and feature documentation (as shown above). The Z remains largely intact with original parts like the Nissan competition exhaust manifold and roll bar. Period-correct parts like the Ikeda Bussan rally seat and reclining navigator seat were sourced. Check out the heater-port to defrost the headlight covers, Nissan-branded acrylic windows and more:

 

 

Authentic Magnesium rally wheels and Kanto Seiki 8krpm tach! Thanks Tom and Steve for bringing it out to the ZONC event!

 

 

This Z deserves its own spotlight, but enjoy this walk-around video until we can visit Tom and take some proper coverage:

 

Z32

 

Z33 and Z34

Our client Steve’s Nismo Z33 and a brace of 350Zs in the generations display. Good to see a build from way back, Tom’s supercharged 370Z.

 

510s

n

Jay’s 510 features our Z Car Garage CV Axles. We will have a full report soon as he just completed a DWA rallye in the Sierras!

 

Matt’s 510 with turbocharged KA24DE:

 

Andrew’s 4-door Hakosuka Skyline and Josh’s 620 truck

Roadsters

The lone Datsun Roadster was Hotep’s ’69 2000 with L-series drivetrain and factory, OEM hardtop!

  

This rad little B13 Sentra b13 packed a full SR20VET engine from a Nissan X-Trail and 6-speed transmission!

 

 

S12, and S14 Nissans:

 

 

R35 Row

A very large showing of R35 GT-Rs parked together

Plenty of cool, modified cars but this one caught our eye, it is a GT-R “T-Spec”.

 

Only offered in two colors, Millemium Jade and this Midnight Purple finish made iconic by special-edition R34 Skylines. Inside, a Mori green interior and alcantara touches really set it apart from other models. Best part? The owner drives it everywhere despite being an ultra-rare and pricey variant.

   

Driving the New Z to Z Car Garage!

 

I had the opportunity to drive the 2023 Nissan Z from the ZONC show back to our shop in San Jose with a group of die-hard Nissan fans. Huge thanks to Nissan! We had the Z for a few days to enjoy so stay tuned for a full report!

Happy Birthday ZONC!

Spending the day at the ZONC 50th Birthday Celebration reminded us to (in the words of the late Mr.K), ” Love cars. Love people. Love Life.”  This is a club that keep the Z community together year-round and we are excited for their next events. Don’t forget to check out our picture gallery below! Big thanks to the ZONC organizers and Nissan for bringing the new Z out. Stay tuned for a full report our time with the 2023 Z!

…[read more]

 

The Nissan 300ZX Twin Turbo is one the best Japanese sports cars of the 90’s. Keeping them on the road is our passion and we love to see our clients like Peter H Enjoying the Ride after some Z Car Garage power, chassis and aesthetic upgades.

 

Let’s take a look at how we made the already-fantastic 300ZX a well-rounded sports car, starting with Peter’s Z-story.

 

It’Z Never Too Late to Z

 

Peter was not always a Z-car enthusiast, but as we all know it there is no time like the present to own one and he acquired his Z32 from a prior Z Car Garage client:

“My experience with ZCG started back in end of 2016 when I acquired the Z from one of their former customers. To be honest, I had a very limited knowledge on Nissan Z cars before 2016 as I had a heart on rotary engine (Mazda FD RX-7) until I connected to the Z and its timeless design. I first brought my Z in to ZCG for power steering leak as the car was exclusively maintenance by ZCG and I want to keep it that way and I was impressed with the quality work of ZCG and their knowledge. Istarted to chat with Rob about the car and learned a lot from Rob about Z cars.”

 

Over the last 5 years we helped Peter with regular maintenance along with performance upgrades. Peter really wanted to give this car the attention it deserves while enjoying the occasional open track day.

Power Upgrades

 

Prior to power upgrades a few items were addressed. The 1990-1994 Z32TT’s have fuel injector problems because Nissan used a wet coil design. This left the injector coil wire prone to oxidation over time and eventual shorting. The solution? Convert to later style injectors using the early fuel rail. For Peter’s Z we wanted to run 740cc injectors which is only available in the new style:

 

More engine work including full timing belt services along with valve cover removal/refinishing:

 

Driveline was upgraded with a JWT HD clutch and flywheel. Keen observers may note that the exhaust has changed too!

 

Larger downpipes greatly improve flow over the stock manifolds. The best downpipes for your Z32TT can be found at SpecialtyZ. These are 3″ units:

 

The Z was treated to a chassis steam clean, making a clean grime-free backdrop for the new exhaust system. Downpipes were mated to 3-2.5″ SPZ mid-pipes and Greddy SP1 Exhaust:

 

We installed more parts from our friends at SpecialtyZ  like their Selin dual MAF. To improve breathing we also installed larger Stillen intercoolers and charge plumbing from Ash-spec. Managing boost is a Greddy Profec E Boost Controller:

 

Finally, low-profile engine mounts from BDE offer more turbo inlet clearance and oil temps kept in check with a Concept Z Performance full Flow Oil Cooler Kit:

 

Recent work at Z Car Garage included a repaired turbo actuator, oil plan replacement, repaired heater core, new OEM wiring harness and minor electrical sorting from a 3rd party gauge installation.

Dyno Tuning

 

We dyno tuned Peter’s Z picking up 25hp/32tq for a total of 36hp/341tq at the wheels:

 

Enjoy this video below showing the dyno run, a walk-around, take-off and brief track footage:

 

Big-Brakes and Chassis

 

As every Z32 owner knows, the stock brakes just aren’t up to the task for track duty or even spirited driving. More power exacerbates the issue and you know how we feel at ZCG:  It’s Stoptech Or Don’t Stop At All. Peter eventually experienced the difference:

“The Z was cranking out 355wHP but with stock brakes and heavy wheels. The acceleration was great but it had a big problem on stopping. I first upgraded with bigger rotors but it did not feel enough stopping power when going downhill. I brought my concern to Rob and Rob made it clearly to me Stoptech BBK is the only solution on Z32s.”

  

We installed the 332mm Big-Brake Kit using red calipers and rotors. Stock vs Stoptech:

   

At the rear, stock Z32 calipers were paint-matched to the Stoptech red up front.  Sport kit slotted rotors with 309 pads and SS lines throughout:

    

In addition to their function, the Stoptech’s look nice too!

 

A few chassis upgrades included Powertrix Front Strut Tower, Stillen Front Rear Sway Bars, SPL Titanium Tension Rods, full Tein Flex Z Coilovers and new steering rack boots/bushings:

 

Interior

 

Peter wanted us to sort out his aftermarket gauges (Prosport Boost Gauge, Oil Temperature, Water Temperature Gauge), install a new steering wheel and upgrade lighting:

    

The dim stock displays benefitted from new LED sources. Check out the difference:

 

Even the climate control display is improved:

 

More LED upgrades throughout the cabin:

 

Peter’s interior touches include a Custom Alcantara on factory steering wheel with thumb rest:

 

Recaro Speed Racing Seats with Bride Seat rail/bracket, Nismo Clutch and Brake Pedal, Cusco accelerator pedal, and custom carbon fiber interior door sill with a logo “Fairlady” :

 

Aesthetics

 

We love to see our parts installed and used on client’s cars. Race car driver and restoration specialist Jim Froula of Racecraft is running our ZCG CV Axles in this Nissan IMSA GTU 300ZX race car!

 

Jim installed CV Axle set #269:

The George Alderman Z31

 

Over a 49-year competitive career, George Alderman was one of America’s most successful sports car drivers, racing in Sports Car Club of America (SCCA) and International Motor Sports Association (IMSA) events.

 

In the 60’s and 70’s George would race a variety of cars. He won the IMSA Baby Grand championship in 1971 in a Datsun 510 and in the 80’s he drove Z cars in the Camel GT series. His Z31 would run both turbo and NA classes for IMSA.

 

Out of 70 starts he had 50 top-tens, 27 top-fives, and 5 wins, all while successfully running his Datsun/Nissan franchise. (Below) a 1988 promotional photo of the  Z31 in front of Alderman Nissan, in V6 IMSA GTU class trim. Find more history on this Z as documented on Alderman Machine.

 

Restoration at Racecraft

 

Jim and the RacecraftNW crew restored the George Alderman 300ZX. As usual, Froula’s painstaking efforts and diligence result in a faithful restoration. Original frame (left) and restored with chassis parts:

 

ITB induction on the NA VG30E powerplant:

 

Bodywork going on, and look at those Panasport C8 wheels!

 

Jim Froula also built this Bluebird SSS Coupe and Hakosuka Skyline, both are running ZCG CV axles on the race track:

   

Thanks for your support Jim! We are excited to see the Z31 back on on the track.

 

Z Car Garage CV Axles

Over 150 sets of our ZCG CV Axles are installed in client’s cars all over the world. For more information please visit our detailed post our HERE. Below are just a few examples of race cars running out CV Axles:

Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:

Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:

  

Set #247 – installed April 2018 on the 260z

  

Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.

 

 

 

 

 

Our client Jas D listed his 1991 Aztec Red 300ZX Twin Turbo for auction on Bring a Trailer. You can view the auction HERE. Below is our blog feature of the Z, enjoy and happy bidding on this stunning Z32.

 

To appreciate the 1991 Aztec Red 300ZX Twin Turbo pictured above we must tell you a story of love, heartbreak, persistance and ultimately satisfaction. Z Car Garage client Jas D has been with us since 2014 when we helped build his 1990 Nissan 300ZX Twin Turbo. This Super White, 44k original-mile example was treated with all the ZCG touches that make a Z32TT go from wonderful to extraordinary. We dubbed it the “Z Masterpiece” (see more here) as it embodied the total package: Power. Handling. Braking. Aesthetics:

 

Jas totally Enjoyed The Ride in this Z, adding 28k thrilling miles with ZCG maintaining it over the years:

“My brother and I have been ZCG customers for almost a decade. I met Rob when I called about getting a PPI on what became Z Masterpiece. At the time, a Super White manual came up on AutoTrader (I LOVE Super White-OMG). It was a low-mile, one-owner, meticulously-maintained time-capsule. Rob actually said WOW after the PPI, and we worked with ZCG over a couple years on a few iterations until we got Z Masterpiece. That car was perfect!  My dream Z; I loved driving that car EVERYWHERE! It is probably my favorite car of all time!”

  

Unfortunately, in 2016 the Z was stolen.

“On October 29, 2016, Z Masterpiece was stolen. We cried, we laughed, we got angry, we sulked for a couple months, forgot about it, and then my dad found the car driving into SF on January 25, 2017. The car had clearly been driven like it was stolen. But, believe it or not, all the expensive components were still on there. We sent it to Rob right away, and he helped us turn Z Masterpiece into the Red Devil Z (which I purchased on April 20, 2017 with 66,XXX miles).”

From Z Masterpiece to Red Devil

 

Persistance paid off, and Jas found a really clean Aztec Red ’91 Z32TT with only 66k miles. All of the upgrades from the Super White, Z Masterpiece were transferred over:

“Rob pulled the motor from the Super White, re-did all the seals/gaskets, and then put the driveline back together into the red Z32TT.  Coincidentally, both cars and engines had 66,XXX miles when this was done in summer 2017.”

 

 

Let’s take a look at the modifications that turn the already stellar Nissan 300ZX Twin Turbo into a superb, balanced sports car.

Engine

 

Though bone-stock with an amazing 44k miles on the clock it needed some attention. We went through the hydraulics and performed full 60k-mile services.

 

Jas wanted to improve power and handling and we happily obliged with a comprehensive list of upgrades this year.  Starting with the drivetrain, the original transmission was replaced with a brand new(!) unit from Nissan:

 

The clutch had seen better days so we replaced it with a JWT unit including their heavy duty aluminum flywheel:

 

A JWT ecu w/boost jets manages uprated NISMO 740cc injectors and the Selin dual MAF. Improved breathing comes from Ash-SPEC inlet piping and dual JWT pop chargers:

   

On the exhaust side, restrictive original downpipes were replaced with these beautiful Specialty Z 3″ downpipes. Note the divorced wastegate piping:

 

Following the new downpipes are more parts from SPZ including 3″ mid-pipes and a cat-back exhaust system to replace the OEM setup:

 

OEM vs SPZ:

 

More upgrades. We installed 4.08 Leader gears, Ash-SPEC Massive SMICs, 2.5 IC tubing, and  SPZ Hi-5 upgraded clutch. The BDE low-profile Z32 motor mounts are a smart alternative to OEM that allows more clearance larger for intakes:

   

Rob recently dyno-tuned the red Z, making 353hp/353tq to the wheels on 91 octane:

 

Stoptech Big-Brakes

 

With all of the speed parts installed next we tackled chassis improvements. Let’s begin with brakes followed by suspension:

We love Stoptech’s products and use them on our own vehicles.  Z32s are relatively heavy and with higher hp the stock caliper/rotors can be taxed quite easily. Jas took it up a notch and ordered a Stoptech 4-wheel Big-Brake Kit for his beloved Z.  Shown above is the ST40 caliper (front) squeezing 332 mm rotors and at the rear are ST22s on 328mm rotors.

The installation:

 

Yes, they are pretty but also very functional. Speaking of aesthetics (that are functional, too), the new calipers are nicely framed between the spokes of these sweet VOLK TE37SL wheels, finished in bronze and sized 18×9.5/10.5 in high-pad offset with center caps.  We like your taste, Jas.  The lightweight TE’s were wrapped in Yokohama tires:

 

Suspension

The suspension was gone through completely with all new parts. KW V3s are our favorite coil-over setup, replacing the Stance coil-overs that the Super White Z had. Stillen sway bars are also shown:

 

Stock vs KW V3s installed front:

  

Rear:

  

Every little nook and cranny of the suspension was handled. New SPL tension rods, upper front control arms, new rear wheel bearings and HICAS removal/eliminator:

  

T/C rods, Stillen sway bar, we also replaced the rack bushings:

 
The Z looks great!

  

The interior is in great condition as well:

  

Jas and his brother love the Z. Thanks for letting us be a part of your journey!

“The Red Devil Z is vicious and so fun to drive. It is the quintessential 1990s Japanese sports car  – red – gold wheels – TTs – exhaust.  It goes fast. It stops fast. It turns fast. Z32TTs are the BEST! We love and respect Rob and the team at ZCG. Rob is a total big brother. He and the team have been with us through the passion and pain.”

**This Red Z32TT will be for sale on Bring a Trailer!**

 

The quest for the perfect Z is almost complete as Jas just found one of the cleanest Super White z32s on Earth. That means the red car is for sale! Jas is listing it on Bring a Trailer. We will update this post and social media when the auction goes live so you don’t miss out! For now, enjoy the extensive photo gallery below, and LONG LIVE THE Z!

 

Lots of pictures in the gallery, enjoy!
…[read more]