We love to see owners installing our Z Car Garage CV Axles in their vintage Nissans and Datsuns. B&T Performance Retro in Thailand is running a set in three of their iconic, right-hand drive cars: a 1971 Skyline 2000GT, Fairlady Z and Kenmeri Skyline:

 

Z Car Garage is proud to offer a CV axle conversion kit for your Datsun S30 and 510. We have sold over 200 sets of axles globally, with customers installing and enjoying them on everything from street cars to full-blown IMSA racers. These CV axles will help transmit power to the ground and ensure smoother operation compared to your standard half shafts.

   

For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft. These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars. Each axle has a serial # for peace of mind and the kit comes with everything you need to install on your car.

Hakosuka Skyline

 

This 1971 Nissan Skyline 2000GT-X was restored by B&T Performance Retro featuring a 3.0L L-Series with triple-Weber induction:

  

Owner Longlom Bunnag sent us a few photos the Z Car Garage CV Axles installed:

 

We love his motto of “This is built to be driven hard, not just for taking still pictures”. Indeed, this Hakosuka sees regular track time. Enjoy this short video clip of the Hako in action:

 

Fairlady Z

 

This RHD FairladyZ features a stroker L-Series with triple-Weber induction and Z Car Garage CV Axles. Like the Hako above, it is also driven in anger:

 

Kenmeri

 

B&T Performance Retro also restored this 1973 “Ken and Mary” or “Kenmeri” Skyline. It features a similar-spec’d 3L L-Series and 5-speed transmission with Z Car Garage CV Axles. More photos in the gallery below:

 

We love seeing our parts installed and enjoyed, thank you B&T Performance Retro for your support! You can see more of their work on Facebook , and read below for more information on our ZCG CV Axles:

ZCG CV Axles

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. These are 100% bolt-in replacing your half-shafts and does not use aluminum adapters commonly found in aftermarket units. We have over 200+ CV axle kits on customer cars and we are stoked with all of the positive feedback.

  For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft.

 Designed and manufactured locally with KAD Models, the ZCG CV axle kit works in both R180 and R200 configurations.

 These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars (powershifting, clutch dumps, etc.). Each axle has a serial # for peace of mind:

The CV axle kit is available now from ZCG for 1595.00 + freight and they come with everything you need to install on your car. Contact us at 408-452-0350 or send Rob an e-mail rob@zcargarage.com to purchase. Installation is just like doing a half-shaft: there is even a marking that shows you where to line up bolts and special hardware:

The ZCG CV Axles in action

The video below demonstrates the “looseness” associated with aftermarket CV axles that use adapters compared to the ZCG axles without adapters. Several customer race/street cars running our CV axles are also shown. Enjoy!

 

Enjoy this video made by our client Hazel. She installed our ZCG CV Axles on her Hazel’s 1970 Datsun 240Z

 

Over 200 sets of our ZCG CV Axles are installed in client’s cars all over the world:

Supermachine in Tokyo, Japan is running our Z Car Garage Big-Brakes and Z Car Garage CV Axles in their Series Datsun 240Z:

 Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!

 Racer Brad H is running ZCG CV Axles in his IMSA GTU race car:

 Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:

 Set #247 – installed April 2018 on the 260z

 Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.

  …[read more]

 

The shop is busy dyno tuning, servicing and upgrading Z cars. Enjoy this brief update from Friday, December 15th.

S30 Z Cars

 

Rashid lives in Dubai and his Datsun 240Z is getting 3.2L L-Series with pH44 Mikuni induction and exhaust header, ZX 5-speed transmission, OS Giken 4.11 LSD, Z Car Garage KW coil-over suspension, our Z Car Garage Big-Brakes (Stoptech) and 16″ Panasport wheels:

 

David’s 1972 Datsun 240Z is getting a Rebello 3.0L, 240SX 5-speed transmission and 4.11 OS Giken LS. It is also getting our Z Car Garage KW coil-over suspension and already has our V1 (328m) Z Car Garage Big-Brakes. Both cars will feature the T3 steering rack that we are big fans of:

 Both Ryan and Beau’s Datsun 240Z cars left the shop recently. Ryan’s Z has LS3 V8 power while Beau’s 1976 280Z has an L28 with stock EFI. Both cars feature our Z Car Garage Big-Brakes (Stoptech), Z Car Garage CV Axles, Recaro Specialist seats, A/C and dyno tuning. Full features on both coming to zcarblog.com!

 

Lou’s Datsun 240Z came in for mechanical sorting. Excited to share his story on zcarblog as Larry also races with us:

 

Nissan 300ZX (Z32)

 

We have several Z32 NA and TT cars currently at the shop. Gary’s Twin Turbo (above) just got a new set of BBS LM wheels. Full update on this car soon! Paul Ferrari returned to ZCG since we completed his Epic Z32 Build in 2017. He’s ready for ethanol, after running this car on race fuel for many years. We will be installing dual fuel pumps, BDE top fuel rail and all the fixings:

Kevin’s Slicktop Z32 is in for a driver’s side window replacement and some touch-up. Love this Z with WORK wheels and Stoptech Big-Brakes:

 

Hakosuka Skyline

 

Sebastian’s Skyline is at the shop and we are doing a suspension refresh, engine work adapting our Z Car Garage Big-Brakes (Stoptech) to this Hako. We hope to offer this in the future for C10 clients. We hope you enjoyed this shop update, stay tuned for more on zcarblog.com and LONG LIVE THE Z!

 

 

Yousef purchased a set of Panasport Wheels from Z Car Garage that we shipped to Saudi Arabia. We are an authorized Panasport dealer and have limited sets available for fitment on your S30 Z car. Before we show you how a set of these 16×7 wheels look on almost every Z color imaginable, enjoy these shots of Yousef’s Series 1 S30 featuring a 3.1L ITB EFI L-Series engine. Full story coming to zcarblog.com soon!

 

 

Panasport wheels for your Z car

    

Treat your Z to a brand new set of Panasport wheels! We special order this offset to enable fitment of a 225/50/16 tire on the 1970 to 1978 S30s.

Contact us: rob@zcargarage.com or call 408-452-0350 Limited availability (pallet pictured)

Wondering how a set of Panasports would look on your Z car? Please enjoy pictures below of ZCG customer cars in jus about every color imaginable with Panasport wheels:

 

WE LOVE RACING! On October 13-15, Classic Sports Racing Group (CSRG) hosted the second annual Laps for Laguna event at Laguna Seca Raceway. Z Car Garage had a blast racing and supporting Datsun 510 race cars running in B-Sedan Group 9 (John Morton Cup). It was a great weekend filled with competition, camaraderie and plenty of Alfas, BMWs and Datsuns sharing the track. Enjoy our report with in-car footage and photos.

Z Car Garage Racers

We raced and provided trackside support for our client’s B-Sedan Datsun 510s (Rob, Todd, Jeff and Gabe):

#88 Todd Rueppel

Todd enjoyed his Z Car Garage trackside support experience with us at the first Laps For Laguna event!

#25 Jeff Rothman

Gabe’s father Jeff is racing his B-Sedan Datsun 510:

 

#8 Gabe Rothman

 

#7 Rob Fuller

ZCG owner Rob Fuller, Bay Area Datsun Dealers tribute car

 

Let’s Race!

Laps for Laguna is a vintage racing event created by the Laguna Seca Raceway Foundation and California Sports Racing Group (CSRG) to raise money for charity. It is an open sound event with multiple races for each race group, charity rides and more. We hope Laps for Laguna continues to be an annual affair.

 

Rob recaps the weekend:

“Friday afternoon we had practice sessions with father-son duo Jeff and Gabe Rothman, Todd R, and myself all running our B-Sedan Datsun 510s. Todd and Jeff were running similar pace so they were cutting it up. Gabe continues to pick up his pace and smooth out his driving…and he is a front runner. Super excited and proud of him.”

 

“It was just myself and Parker’s Alfa in front. Fortunately, he has picked up some speed this year and become the one to beat! Really stoked for him and Fred from Autostrada prepping this fast Alfa. On Sunday we had a really good battle when Alan Terpins in 911 T/R. he motored us pretty well on the start and Parker and I just chased him for 8-10 laps. Other two races Parker and I matched each other’s pace and exchanged places a few times, but my 510 didn’t have the pace of that Alfa. Congrats to those guys. Perfect weather, great run groups and one fantastic weekend!”

 

Watch this exciting in-Car video from Rob’s 510, mixing it up with a 1968 Porsche 911 T/R driven by Alan Terpins and Alfa Romeo driven by Parker McKean:

The Z Car Garage Nissan Z as Pace Car

Z Car Garage was happy to have our 2023 Nissan Z as Official Pace Car at Laps For Laguna. Rob enjoyed wheeling the New Z around the track:

“The track had a “friends of Laguna Seca Raceway” gathering where corporate partners would bring their staff to enjoy some charity rides in cars like GT40s, Nascar, Ferrari’s and one new Nissan Z car. I was able to give rides on Friday morning for about 2 hrs straight. It was really fun to put the new Z through its paces.”

You might notice the new Z’s livery, it’s a nod to our #49 Joel Anderson IMSA GTU Datsun 240Z, and we will dedicate a separate blog post to it:

 

Paddock Highlights

Big thanks to Meghan for taking photos and video around the paddock. Here is a highlight reel of race and paddock action at the track:

A weekend of great racing and good times

 

Special shoutout to ZCG crew for keeping all of the cars running so we can race! More photos in the gallery below.

 

Join us for the 2024 Vintage Racing Season!

Z Car Garage is amped for more racing next year. Please check the CSRG website and zcarblog.com for upcoming race events. We are thinking about returning to Walter Mitty at Road Atlanta in spring since they are celebrating Japanese cars. We may get a transporter full of vintage cars so if you are a vintage racer and want to join us please please inquire with Rob at the shop. CSRG race event schedule below. Stay tuned for more race reports!

…[read more]

 

Jaime is performing a full restoration of his beloved 1972 Datsun 240z, now in color 920 Safari Gold with a host chassis and drivetrain upgrades. We are happy to report that his Z Car Garage Big Brakes fit nicely behind the rare, sand-cast Gotti wheels from Racing Service Watanabe. These are 15×8 and 15×9:

Big-Brake Kits Available For DIY Install!

Z Car Garage is proud to offer our Big-Brake Kit to Z-Car owners that want to perform the installation themselves. We can ship worldwide and each kit contains everything needed with a comprehensive (40-page) installation guide. Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.  Let’s take a closer look at Jaime’s beautiful S30 and his ZCG Big-Brake installation:

 

As mentioned, our ZCG Big-Brake kit ships with everything needed to install and retains the factory parking brake:

  

See more about his Z in our feature on zcarblog.com HERE and follow Jaime on his Instagram page to see his attention to detail. Thanks for your support Jaime!