What sparked your interest in Z Cars? For Scott W it began when he was about 15 years old, and eventually led him to Z Car Garage:

“My best friend’s brother’s friend had a silver 240z. He would take us to lunch and we had to lay down in the back. From that time on I wanted a Z! I started reviewing zcarblog.com and found a very nice 260z for sale that was owned by an older retired couple. Based on all the work performed by ZCG I met with Rob and I purchased it. The 260z was originally gold with the 5mph bumpers.”

 

Indeed the gold 1974 260z was our very own customer Geri R’s. When she retired and moved to San Diego she told Rob, “If you are not in SD my Z car can’t come with me…please find it a new home.” Scott W visited ZCG in 2013 and purchased the Z, well before the S30’s garnered high prices! He had a very clear vision of building the ultimate Z Car:

“I told Rob my plan was a car that was great to look at but I’m going to drive it! And drive it hard. My goal was to keep it looking 1974-ish on the outside but modern under the skin.”

So we began the process of upgrading an already solid, clean chassis that Geri lovingly maintained.

Drivetrain

The first item we discussed was the engine. Scott wanted more power and Rob suggested a Rebello 3.2L Stroker engine. Supporting parts included an MSA 6-into-1 header,  ZCG exhaust system, KOYO race radiator (custom upper hose) and ZCG heat shield. A few pictures of the engine build/installation with many more in the gallery:

 

Induction is handled by Jenvey individual throttle-body fuel injection, managed by a Haltech Elite 750 standalone system.

 

A NISMO Competition oil pan was installed to cope with high cornering loads from road course driving. Also shown is the Nissan 240sx 5-speed transmission. This “KA24” unit is significantly stronger than early S30 transmissions. It handles the 3.2L’s extra power, and we offer this conversion to customers.

 

When we upgrade the transmission we also install a JWT HD clutch with aluminum flywheel. Helping put the power down efficiently is an OS Giken LSD. The R180 houses a 4.11 R&P and the assembly is setup in-house (by Joshua Corwin). Rounding out the drivetrain upgrades are a set of ZCG CV Axles(shown below)

 

The ZCG Exhaust system using 2.5″ piping to a stainless resonator and Magnaflow muffler with slash-cut tip. Listen to the sound in the video below!

   

The completed engine bay. All hoses, hydraulic lines, fittings etc were removed and restored/replaced with new parts. Zinc plating hardware throughout:

 

On the dyno, Rob tuned the Z with the Haltech making 257hp/229tq to the wheels. An improvement from the stock 121hp/130tq:

Chassis

 

Suspension upgrades were next, focusing on the ideal setup for open track days while remaining comfortable on the street. Scott outgrew the Tokico 5-ways and now has Koni Yellows with our Ground Control coil-over setup from back in the day. Techno Toy Tuning control arms, T/C rods and more complement the total suspension restoration. All parts were powdercoated and hardware plated.  We really appreciate Gabriel at T3 and his staff. They make some of the best suspension parts out there for Z cars.

 

Panasport Wheels

 

Custom sized 17×9 Panasport C8 wheels allow us to run a wide 255/40/17 tire at all four corners, without flaring the fenders:

 

Bridgestone RE-71R tires are shown below. The 17″ diameter wheels also give clearance for our ZCG Big Brakes!

  

ZCG Big-Brakes and CV Axles

After driving our customer Lou’s Fairlady, Scott was sold on our Z Car Garage Big-Brakes.

  

Not to be confused with our familiar Z Car Garage Big-Brakes (for small wheels) that we currently offer, this Big-Brake kit was our initial setup from many years ago. Our first collaboration with Stoptech, this 328mm sized kit requires 17″ diameter wheels and the massive ST-42 calipers are finished in bright red. This kit was installed on our OS Giken TC24-powered 240z and a few other customer cars.

 

 

The ZCG Big-Brakes framed nicely behind the black-spoked C8s. We are currently re-vamping this kit using Stoptech’s latest ST-43 caliper.

    

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 70 CV axle kits on customer cars and we are stoked with all of the positive feedback.

   

Scott’s 260z received ZCG CV Axles set #250

  

More pictures of the ZCG axles installed, also visible are the T3 control arms and ZCG exhaust system:

  

Comfort

 

Scott’s 260z had an interior in fair shape. We gave it the full ZCG treatment with a refurbished dash, new carpet and creature comforts like Bluetooth, radar detection and functioning HVAC. In-progress shots below with more in the gallery:

 

New carpet throughout, integrated speaker box in hatch:

 

The stock seats were in bad shape Scott was sliding around on them so we upgraded to leather Recaros. Perfect for keeping him locked in place during track days.

 

The heater system from core to blower was completely restored:

 

Full A/C setup using a smaller Toyota compressor with existing A/C parts:

 

Performance

 

Balance. This Z has power and the chassis upgrades to transform it into a well-rounded sports car. Remember Scott’s goal of building the Z to drive really hard? He has been taking his S30 to Buttonwillow Raceway every month, putting our ZCG products to the test on the track.

 

Enjoy the sounds of Scott’s Z in this short video below:

 

 

Exterior

 

You didn’t think we would forget to mention the total paint color change, did you?  About six months into his build Scott called to request a color change from gold to a Mercedes-Benz shade of Gun Metal. Our man William painted the body, retaining all side-markers to maintain a stock look:

 

Scott however was adamant about changing the stock impact bumpers. Rob located Euro-style 240z bumpers and had them sectioned/re-chromed:

 

Thank you Scott for letting us build your Ultimate Z Car! We are proud to see you enjoy it on the track and street.

LONG LIVE THE Z!

More pictures in the gallery below!
…[read more]

 

Brian P hails from Canada and lives in the Bay Area with his family. We met him in 2014 when he visited ZCG for minor sorting and upgrades on his pretty 1973 S30.

 

Attention to the engine bay included changing all fluids, new motor mounts, upgraded alternator and a fresh Koyo racing radiator:

 

Rob dyno tuned the stock, SU-carb’d L24 before and after the addition of our ZCG exhaust using 2.5″ piping to a stainless resonator and Magnaflow muffler with slash-cut tip. We saw gains of 13hp/5tq and improved power throughout the mid-range:

 

Brian returned in 2016 for suspension upgrades. We installed 5-way Tokicos, Suspension Techniques sway bars, Techno Toy Tuning adjustable rear lower control arms, TC rods, and rack bushings.

 

Everything was powdercoated black and we zinc’d all hardware. With fresh bearings and a few more new suspension parts he was out and enjoying the Z.

Panasport Wheels

Complementing the new springs and shocks on Brian’s Z are Panasport wheels! We replaced the old-school Western Turbine wheels with 16×7 Panasports and Hankook R-S3 tires in 225/50/16.

Bottom left picture from Brian:

“This was taken on the day I picked up the car from the PO, a retired writer in Oakland, who only sold me the car after a 3 hour interview/visit 2 weekends prior, before the car was officially ‘for sale’ (I felt like I was being vetted as the car’s next custodian).”

 

Here is Brian Enjoying The Ride in his Z at last year’s Rolex Monterey Motorsports Reunion at Laguna Seca:

ZCG Big-Brakes and CV Axles

After a few years of driving, Brian came back early this summer for more upgrades. We handed him the keys to “Mrs. Butters”,  our 1970 Series 1 240z shop demo car and he was sold on our Z Car Garage Big-Brakes (for small wheels) and Z Car Garage CV Axles! Butters has a way of doing this to our customers 🙂

     

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

A few closer detail shots of the calipers, rotors and hardware:

 

We removed Brian’s stock brakes and installed our ZCG Big-Brake kit.  We also took his Tokico 5-ways in trade for a full coil-over (Koni) suspension from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff. They make some of the best suspension parts out there for Z cars.

 

ZCG Big-brakes and T3 coil-overs replacing stock setup:

    

At the rear, the factory drum brakes were replaced with our ZCG Big-Brakes. Factory handbrake functionality IS retained! T3 coil-covers also installed:

 

Brian really wanted the look and feel of Mrs. Butters Z so we obsessed over ride height until we got it exactly where he wanted it. The Z looks fabulous from any angle:

 

 

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 70 CV axle kits on customer cars and we are stoked with all of the positive feedback.

  

Stock half shafts (L) and ZCG units:

 

More pictures of the ZCG axles installed, also visible are the T3 control arms and ZCG exhaust system:

    

Driving is Believing

Brian was impressed with the ZCG Big-Brakes and how well they work: like having late model brakes on a vintage car!

“The brakes are amazing. I push the car hard on weekend drives on the Peninsula, normally taking different routes out to Alice’s, now without any fade or fear (except from passengers).”

 

With suspension and drivetrain sorted, Brian had a few remaining things on his mind. He reported a heavy fuel smell in the cabin so we replaced all of the vapor hoses to the fuel tank and installed a new hatch seal:

 

Finally, his hood had little specks on it so we had our man William repaint and blend it.  Icing on the cake: Rob installed a NOS “Datsun” emblem on it after adjusting the hood.

 

Enjoy this short video of Brian’s Z:

 

 

We enjoyed working with Brian:

“Rob and team are the best, and the only shop that will ever touch my car. I have supreme confidence that my expectations will be always be exceeded, and Rob’s enthusiasm is infectious. On a lighter note and as a Canadian transplant down here in the Bay Area, it’s a pleasant surprise to find someone who doesn’t feel the need to insert ‘ice’ before saying ‘hockey’.”

Thank you for entrusting us with your S30, Brian. We are so fortunate to work with owners that appreciate the Z and believe in our ability to make them better! LONG LIVE THE Z!

More pictures in the gallery below!
…[read more]

 

The 2019 Japanese Classic Car Show was held on September 21, in Long Beach, CA. This is the original vintage Japanese-car event in SoCal and in its 15th year, JCCS has grown incredibly. Over 10,000(!) spectators enjoyed 400+ cars covering the lawn of Marina Green Park. The vehicles themselves remained a fantastic blend of stock, modified and restored. This is the most important show for Japanese cars, and the Z Car Garage crew keeps coming back every year to soak up the sun, see old friends and drool over some spectacular vintage builds.

   

ZCG Delivers Mr. K’s Datsun 240z!

 

We had the joy and honor of delivering Mr. K’s 1972 Datsun 240z to owners Johnnie Gable and her son Kenny Ueda at JCCS. In true “Datsuns Are Driven” form, Rob drove Mr. K’s Z 400 miles from San Jose to Long Beach and it ran flawlessly.

 

Joining us were ZCG customers John B and James S in their Z’s. A few pics from the road trip South:

 

Showtime!

 We unloaded early on Friday at Marina Green Park.  This location is larger and more vendor-friendly than The Queen Mary of past shows. Our booth was situated in a great spot, at the mid-point of the show with our neighbors from JDM Car Parts.

 

We had lots of traffic at the ZCG booth. Mr. K’s Z definitely created a buzz, and enthusiasts checked out our Big-Brake kit for small wheels, CV Axles and picked up some free swag. Thanks to customers, fans and friends that stopped by! We met many great Datsun fans and enjoyed talking cars.

  

James’s 1972 S30 was displayed with fellow Z car owners in the show. At the heart of this beast is a turbocharged L-series managed by Haltech. Chassis upgrades include custom full-length subframe connectors, our ZCG CV Axles and Big-Brake Kit (328mm) behind RS-8 wheels restored by Love20bee.

 

A stack instrument cluster was integrated into the gauge pod, viewed from leather Recaro Pole Position seats. This Z has a very unique sound. We recently tuned it on E85, dyno results and videos coming soon. We are very happy for James as he won the award for 2nd place for Best Z!

   

Delivering Mr. K’s Z to a very happy Johnnie Gable and Kenny Ueda:

 

Expect a full report on our work performed to get this precious Z back on the road.

 

Highlights from JCCS

Enjoy this video I made highlighting the sights and sounds of JCCS 2019:

 

Why do we keep coming back to JCCS? Each year the bar is raised for the show cars, and this year was truly impressive. With over 400 cars and 80 vendors it was almost impossible to see it all in the 9am-3pm show time. Here are our favorites, starting with Nissan/Datsun.

 

Skylines

Here are few of my favorite Nissans and Datsuns, starting with that not-so forbidden fruit commonly known as the hakosuka Skyline. Roy De Guzman’s Hako sported a new look with the premier Pandem Rocketbunny flare kit and Cross Fever wheels:

  

Patrick S’ Kenmeri Skyline and Mikey C’s sedan both Rb26-powered and sitting on Watanabe Gotti wheels:

 

Mel’s R30 4-door on Watts, next to Jay’s DR30:

  

I didn’t expect to see a large gathering of R32 Skylines, even a 4-door!

 

Z Car Extravaganza

 

With the 50th Anniversary of the Z cars from all generations were in full force spanning the crested lawn of the Marina Green Park.  I’m a big fan of subtle modified Z’s but I can also appreciate pristine, bone-stock examples and the occasional shakotan build.

Stock is good: beautifully restored ’72:

   Todd Kaneko’s iconic, turbocharged L-series Z on Chevlon wheels:

 

So. Many. Z’s!

 

The winning Z:

 

1975 280Z 2+2 on Epsilons from Love20bee:

 
Shakotan !

   

Larry Chen’s freshly-painted S30!

  

Good old triple-carb’d L-series power!

 

RB25DET-powered:

  

S130!

 

You can find more S30s in our gallery!

Z31s were plentiful too, in both stock and modified examples:

      

The Nissan S12 chassis has been growing in popularity. Known as the “200sx” stateside there were some cool examples of both hatchback/coupe bodystyles.

   

People

At the JCCS  it is always great to see old friends and meet new enthusiasts! Thanks to everyone that visited the ZCG booth!

    

Our friends at BringaTrailer.com

Datsun Fairlady Roadsters

The Datsun Roadsters came out in full force this year, running 6 cars strong!

 

Raymond Lim’s 1963 1500 was the oldest car present. This 3-seater SPL310 model was driven, not trailered to the show!

  

Ed’s sharp 1970 SPL sporting Enkei Compe wheels:

 
It was also great to see Michael Anderson’s “Rock Vest” race car. This historically-significant roadster is currently being raced by Mike!

  

The Desirello’s also displayed their SR20-powered beauties:

   

More roadster pics in our gallery!

Datsun 510s

 

Datsun 510s dominated the field as the most represented model again this year. From sedans to wagons and a single Bluebird Coupe!

 

Andrew’s RHD tribute 510 won Best of Show!

 

TSR-built 510:

 

Brian Holloway’s Coupe with Recaro seats…and the coolest socks

Wagons!

 

Our friend Troy’s customer won Best 510!

 

13B and CA18DET:

   

Dogs Love Trucks!

Kenny’s NL320 pickup:

    

Toyota

Toyota always has a huge corporate involvement with an assortment of race cars. They even had the new Supra on display and a 2000GT!

AE86, Cressida, Celica’s and Corolla’s!   

Great showing of RA29 (Liftback) Celicas!

  

Trucks:

3nd and 4th gen Celicas:

Speed Star Racing Air Stage on Tommy D’s Starlet:

 

Wheels For Fantasy

I personally love going to JCCS because I get to see very rare Japanese/tuner wheels and parts. Preservation of authentic wheels and appreciation of the time and effort spent to find certain specimens that most folks have never heard of in this generation is what I admire most.

 

Variations on the mesh wheel from BBS, Epsilon, SSR, Volk, Bahn and more. You can’t go wrong!

 

Many more pictures from JCCS in the gallery!

Here are a few great sites with more coverage of the show:
Bring a Trailer
Autoweek
Jalopnik
Super Street

Thank You JCCS!

It is difficult to run a car show and keep up the quality and interest levels but the folks at JCCS have managed to do exactly that for 15 years! No other show gives you the chance to see obscure, pristine, modified Japanese classics…and we look forward to next year’s entrants. Koji and Terry the new venue is great, almost overwhelming with the number of cars! We hope you have enjoyed our coverage and please visit our mega-gallery for more pictures.

 

      

Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.

Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.

Nissan/Datsun experience is NOT a requirement, you just need to have passion.

Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.

 

  

 

 We had the pleasure of working with Dirk to help achieve his vision of a Z car that can perform and be daily driven. Our  Z Car Garage Big-Brakes (for small wheels) and Z Car Garage CV Axles grace this Z with a host of chassis and driveline upgrades. Here is a background on how his Datsun passion started before visiting ZCG.

Datsun 510 and Z car love

Dirk bought his first Datsun in 2014, a 1970 510, to learn how to work on cars himself. After learning more about the history of Datsun, and the significance of both the 510 and the 240Z in establishing Japanese cars in the American market, he knew he had to own a Z as well.

 

A year later, the right Z showed up on eBay in Texas, a 1973 silver gray one. Nice to look at, mostly stock, but not so nice that it’d feel bad to drive and streetpark. And after pouring over the photos and talking to the seller, Dirk bought the car sight unseen. The idea was to have a nice Z to enjoy and drive, while continuing to work on the (sometimes not) rolling restoration of his 510. The car was lovingly restored by a dad and his children and in mostly stock condition.

   

The tires were a bit old, so some sticky Bridgestone tires were acquired, which revealed the suspension as the next weak spot. T3 coilovers were installed, and the next weak spot was the open differential which Dirk broke driving the car around a hairpin on Page Mill Rd. He bought a limited slip diff from a late-model Subaru, modified it to fit and kept driving the car. The original plan had gone awry, and the Z was both driven and worked on a lot more than the poor little 510.

Photos: Dito Milian/Gotbluemilk.com 

After many more tweaks, different induction setups, spring rate changes, rebuilt stock brakes, and 24K miles of driving including a few track days, Dirk’s Z was inching closer and closer to his vision.

 

“After installing a Datsun Spirit STR-3 engine with a set of Nismo Mikuni PHH44 carburetors, the biggest weak spots left were the rest of the drivetrain (especially the stock 4-speed transmission, but the Subaru diff had also developed some bearing issues), the stock brakes, and of course the loose nut behind the wheel – but sadly that last component typically takes too much money and time to modify thoroughly.”

 

After comparing the Z to his Subaru BRZ on the track, it was clear the Z was better at everything except for shifting gears. Since his engine made a healthy amount of torque, but not enough to warrant a CD009 (350z) transmission, Dirk kept looking for alternatives. He also wanted something with slightly closer gear ratios to better suit the engine’s power band. An S15 Silvia 6-speed seemed like the perfect fit. It had almost exactly the same weight and dimensions as the original box, nice close gears (in fact identical to those of his Subaru), and Dirk found a HybridZ member who would modify the bell housing for him to make the box fit an L-series engine.

S15 6-speed transmission

 

Through mutual friend Brian K, Dirk got connected with Rob at Z Car Garage and they immediately hit it off:

“After I bought and installed a set of their amazingly well-built CV axles, it was clear to me that ZCG’s reputation for high-quality work was very well-deserved. If I didn’t get the chance to work through the project myself, this is who he wanted to do it for me.  I was excited to work with ZCG to take a few ideas over the finish line.”

We fabbed a transmission mount installed the 6-speed unit:

 

When we got to the clutch of the Datsun Spirit 3L we noticed that the rear wick seals were leaking from at the back of the last main cap. The wick seals were removed and replaced properly:

 

“The S15 transmission fit surprisingly well. ZCG built a custom crossmember to locate it, and the shifter lined up almost perfectly. No transmission tunnel mods were necessary. The modern shifter did stick out like a sore thumb in the otherwise period interior, so ZCG went to town on it and built Dirk a custom shifter that would look stock, and that works with the Datsun competition shift knob. A small 6-speed shift pattern sticker modeled after the one used in the Silvia is the only clue there’s something different going on under this car. And of course the driving experience.”

Making the S15 shifter look factory, we are happy with the result and Dirk’s subtle shift pattern sticker:

 

The Datsun Comp shift knob complements the steering wheel:

 

Engine Bay and Sorting

After a good long chat, a baseline dyno run, a drive, and going over the various odds and ends in the car that were on Dirk’s wishlist besides the 6-speed project, Rob become a great collaborator in further refining Dirk’s vision for the car.

“We actively talked about my goals, and Rob shared his opinion on how to best achieve it, and really talked through the pros and cons of various options. Along the way, Rob was able to source some really choice parts to take the car to the next level.”

Before 

A beautiful competition oil pan was installed to maximize ground clearance, and a new custom-built PCV system helped mitigate oil fumes. ZCG also deleted Dirk’s aftermarket A/C system that never worked correctly, renewed all fuel lines, tested the fuel tank, and recreated the expansion tank setup that was deleted by a previous owner.

 

Rob and Dirk were not crazy about the Arizona Z Car oil pan. It was removed and replaced with DP Nismo comp pan from Rob’s parts stash:

Chassis and Driveline Upgrades

Together we found a balance between taking the car a major leap forward, while also leaving a few major areas untouched for a future revision, to keep the budget under control and get the car ready to enjoy for the summer.

“We landed on a ZCG-built 4.11 OS Giken limited slip differential, a custom aluminum driveshaft, a Fidanza Aluminum flywheel and a Jim Wolf Technologies clutch to round out the drivetrain project, and the entire drivetrain works together beautifully as a perfect package. The car is quick out of the corners, there’s no longer a need to go down to first gear on Page Mill Road, and it still has long enough legs to be quiet and comfortable on the freeway.”

 

We changed the final drive, installing a R180 4.11 OSG LSD built in in-house:

    

The clutch hydraulics were replaced to work with new alumimum flywheel/JWT HD clutch combo:

 

Dirk had a GPS speedometer setup from SpeedHut that we helped setup and read accurately:

 

Dyno Tuning

Rob massaged the Nismo Mikuni carbs, and after a dyno tuning session, unlocked an additional 30 whp from the car over the baseline run and the car is now putting down a healthy 200hp/200tq at the wheels.

   

Enjoy the dyno video and L-series music!

 

“To make sure the car was ready for the track with almost twice the power at the wheels over a stock 240Z,  ZCG also installed their big brake kit, which has improved front to rear braking balance significantly over the stock setup, where the rear drums feel great for a week after adjusting, and then become mostly ornamental. The brakes feel a lot more reassuring, while remaining easy to modulate, and thankfully without being overly grabby, the car is still incredibly easy to heel and toe. As an added bonus, it’s really nice to have a handbrake that will hold hills with ease.”

 

ZCG Big-Brakes and CV Axles

    Dirk visited ZCG and drove “Mrs. Butters”, our 1970 Series 1 240z shop demo car and he was sold on our Z Car Garage Big-Brakes (for small wheels) and Z Car Garage CV Axles! Butters has a way of doing this to our customers 🙂 As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

A few closer detail shots of the calipers, rotors and hardware:

   

We removed Dirk’s stock brakes and installed our ZCG Big-Brake kit.

 ZCG Big-brakes replacing stock setup up front:

   

At the rear, the factory drum brakes were replaced with our ZCG Big-Brakes. Factory handbrake functionality retained!

   Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 70 CV axle kits on customer cars and we are stoked with all of the positive feedback.

   

Also visible on Dirk’s Z are the excellent adjustable lower control arms from Techno Toy Tuning.

 

The Z got a full alignment, though tackling the suspension setup is on future list of projects:

 

Enjoying the Ride

 

Dirk continues to enjoy his Z which is now equally at home on the street and track. We enjoyed working you Dirk and it was rewarding to help you improve your Z.

 

Enjoy these pictures of Dirk Enjoying The Ride and of course more photo documentation of our work in the gallery below. LONG LIVE THE Z!

Photos: Naveed Yousufzai

Photos: Daniel Ohlund/Bay Roads AP