John E came to Z Car Garage through a dealership connection at Dublin Infiniti. He purchased this Q50S Red Sport in 2019 with 46k miles on the odometer and it was time for bolt-on performance upgrades with dyno tuning.

 

We installed several parts from AMS Performance including their AMS Heat Exchanger, AMS Coolant expansion tank. Helping the VR30DDT engine breathe are AMS downpipes and a full Fast Intentions cat-back exhaust system. Photos of each are shown below.

 

The new AMS heat exchanger compared to the stock unit and installation:

AMS expansion tank installed replacing two plastic OEM units:

 

AMS downpipes:

 

The Fast Intentions cat-back exhaust replaces the restrictive OEM system:

 

Standard exhaust tips on the FI exhaust system, we love the quality, fitment and sound of these parts:

 

We also installed new Hotchkis sway bars front/rear. Stock vs new below:

 

Dyno Tuning

Straight from the factory, the VR30DDTT is an impressive motor rate at 400 hp and 350 ft-lbs tq stock. It is actually underrated as we have seen with dyno testing. With a few bolt-ons and tuning, even more power can be unlocked from the VR30. Rob tuned John’s Q50 using EcuTek, making 404hp/435tq at the wheels. A significant improvement over the 336hp/338tq baseline:

  

Enjoy the dyno video below:

 

Enjoy The Boost John!

Are you ready for upgrades on your late model Nissan/Infiniti? Give us a call or e-mail!

 

 

We love to see owners installing our Z Car Garage CV Axles in their vintage Nissans and Datsuns. Adam D is running a set on his 1971 Datsun 240Z with an RB25DET drivetrain.

 

Z Car Garage is proud to offer a CV axle conversion kit for your Datsun S30 and 510. We have sold over 200 sets of axles globally, with customers installing and enjoying them on everything from street cars to full-blown IMSA racers. These CV axles will help transmit power to the ground and ensure smoother operation compared to your standard half shafts.

  

For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft. These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars. Each axle has a serial # for peace of mind and the kit comes with everything you need to install on your car.

 

Datsun 240Z Dreams

 

Adam shared his Z car history with us:

“I heard about Z car Garage on YouTube. I own a 1971 240z with a Series 1 RB25det and it’s been my dream build since I was a teenager. My neighbor growing up had a 240z and he made his look so sporty I had to have one. I always loved Hondas and Evos which I’ve owned and built,but the 240z for me was my all out build as far as performance since it’s a classic car and I don’t have to worry about emissions. I’ve been building this car since 2013 when I bought it as a rolling shell with the RB for $7500 off Craigslist...”

 

“I first had the body work done paint and body by Mikes Paint and Body in Fullerton. He molded in my fenders. Then I found Nissan RB engine specialist vendors (Rawbrokerage) built the motor with Animal auto. I recently had fabrication to make custom titanium and other metal work by humble engineering.”

   

“The car has full T3 suspension and arms with Z Car Garage Axles. I chose these axles since I wanted over kill if I want to push more power. I run a Garret Gen 2 g35 .82 ar. The car runs on a Haltech stand alone rated at 530whp. I am highly satisfied with the axles and I like how when I called and had questions Rob took time to talk to me. Future work is more cosmetics and interior .”

        

 

ZCG CV Axles

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. These are 100% bolt-in replacing your half-shafts and does not use aluminum adapters commonly found in aftermarket units. We have over 200+ CV axle kits on customer cars and we are stoked with all of the positive feedback.

   

For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft.

  

Designed and manufactured locally with KAD Models, the ZCG CV axle kit works in both R180 and R200 configurations.

  

These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars (powershifting, clutch dumps, etc.). Each axle has a serial # for peace of mind:

 

The CV axle kit is available now from ZCG for 1595.00 + freight and they come with everything you need to install on your car. Contact us at 408-452-0350 or send Rob an e-mail rob@zcargarage.com to purchase. Installation is just like doing a half-shaft: there is even a marking that shows you where to line up bolts and special hardware:

The ZCG CV Axles in action

The video below demonstrates the “looseness” associated with aftermarket CV axles that use adapters compared to the ZCG axles without adapters. Several customer race/street cars running our CV axles are also shown. Enjoy!

 

Enjoy this video made by our client Hazel. She installed our ZCG CV Axles on her Hazel’s 1970 Datsun 240Z

 

Over 200 sets of our ZCG CV Axles are installed in client’s cars all over the world:

Supermachine in Tokyo, Japan is running our Z Car Garage Big-Brakes and Z Car Garage CV Axles in their Series Datsun 240Z:

 Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!

 Racer Brad H is running ZCG CV Axles in his IMSA GTU race car:

 Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:

Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:

 Set #247 – installed April 2018 on the 260z

 Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.

 

 

Nissan’s Thrill Street exhibit at SEMA in the Las Vegas Convention Center West Hall, booth #52141, features the 2024 Nissan Z NISMO, a Safari-style Z concept vehicle and a replica of the Datsun 240Z rally car that helped cement the Z’s place as a sports car icon with its victory in the 1971 East African Safari Rally.

 

The Safari tribute 240Z is owned by our client Randy Jaffe and Z Car Garage helped prepare this car a few years ago for a Nissan commercial. We installed new 3.0 Rebello street race motor, 1982 280ZX 5 speed transmission and OS Giken 4.11 LSD. Small details were re-created including functional Works-style side jacking points, rear bumper steps and twin-exit exhaust system. View our full report on this build HERE.

 

Photos by Larry Chen

 

Talented photographer and car culture ambassador Larry Chen captured these amazing photos and video of Randy’s Safari tribute and the New Z Safari tribute in action. You can see more photos in the official Nissan Nissan Press Release, and view behind-the-scenes footage on Larry’s Instagram.

 

 

Enjoy this video highlighting Larry Chen’s work:

 

Follow or Facebook and Instagram accounts for more Z car content from the SEMA show!

…[read more]

 

 

 

At Z Car Garage we specialize in performance modifications and tuning for the Nissan/Infiniti sports cars. Dyno tuning with UPREV or EcuTek software can maximize power gains from individual modifications like intake/exhaust upgrades. Josh M visited Z Car Garage for a dyno tuning session on his Nissan 350Z following an engine swap and we were happy to help him.  Let’s hear about his Z-car story…

Josh’s 350Z V.2

 

“I bought my car back in 2007 after graduating high school. I first heard about the shop shortly after I joined my350z.com back in 2008. After a few years and acquiring a full set of Motordyne bolt ons I finally called up the shop and met with Rob in 2013 to get it tuned. He wisely advised against it with how much oil I was consuming back then and suggested I come back with a fresh motor or rebuild (I’m thankful for his honesty and integrity).”

 

“Last year when that motor finally gave up around 200k it was time to swap all my mods to a new engine and call Rob for a dyno tuning session. My car made great power and surpassed my own expectations when it made 288whp and 274wtq on this swap from an ’04 G35. It’s always felt like a strong DE with a solid powerband and the dyno tune proved it. My main goal for the car is overall balance between drivability on the streets and performance on the track, and using our beautiful Santa Cruz mountain roads as testing grounds has helped me kind of find that happy spot.”

  

“As far as the exterior, a mix of KH3 super black and seibon carbon keeps it stealthy but also distinguished in the right light. I’m serious about the overall balance thing and reducing this 2 seater cars weight is a top priority, currently sitting at ~3100lbs and ideally want to be under 3k lbs.”

Dyno Tuning at Z Car Garage

 

A typical dyno session begins with a road test and full inspection before hitting the roller. We found a failed inlet hose and loose plenum bolts so we tightened everything up to ensure a successful dyno pass.

 

We dyno tuned the Z with UPREV and ARC license. Z Car Garage offers this ARC (Advanced Racing Controls) license add-on service to the existing UPREV Flash, allowing adjustable launch control, burnout mode, and flat-foot shifting for $150. This is for cars with manual transmission, VDC/cruise control. Call Rob for more details! Josh’s Z made 288hp/272tq to the wheels, a significant gain over baseline of 274hp/261tq:

 

Turn up the volume and enjoy this video of Josh’s 350Z on the dyno. Thanks for your support Josh and LONG LIVE THE Z!

Interested in dyno tuning your Nissan/Infiniti sports car? Contact Rob at the shop for more information and scheduling 408-452-0350 or e-mail Rob: robATzcargarage.com