We love to see our parts installed and used on client’s cars. Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!

 

Glenn is preparing for the upcoming Rolex Monterey Motorsports Reunion event at Laguna Seca. A half shaft failure is not something he wanted to worry about while racing so he replaced them with ZCG CV Axles. Glenn installed set #367 himself with ease:

 

The Different Drummer Z

 

Glenn Chiou is our client, fellow racer and friend. He was one of the first to run our Z Car Garage Big-Brakes on his RHD 240Z and actively vintage races both 510 and Z cars. You may have seen Glenn’s FAR Performance 240Z in VIPS Restaurant livery as raced in the 70’s by Loren St. Lawrence. Glenn restored this race car himself and it is now going back to Bay Area Datsun Dealers livery as raced by FAR Performance privateer Walt Maas.

 

Glenn’s got a passion for re-telling the stories of legendary privateer Z car racers and his current restoration project is the Different Drummer Racing Z raced by Greg Sorrentino. This is a really cool race car with great history and build details behind it.

 

Chassis # RLS30-000024 is a July 1973 pre-production Datsun 260Z chassis that was sold by the factory for one dollar in 1975 to Different Drummer Racing, owned by Greg Sorrentino of Troy, Michigan. It was one of the very first Datsun 260Z chassis and was built by the legendary American fabricator, Ron Fournier. This Z car has been consistently raced for the last 40+ years in IMSA GTU, SCCA Trans-Am, and C-Production/GT-2 classes.

  

In 1975, the Datsun Competition Department agreed to support Greg Sorrentino’s IMSA GTU racing efforts by providing him a pre-production Datsun 260Z. Once in Sorrentino’s hands, it was left to his all-star lineup of builders to help him build a frighteningly fast IMSA GTU car:

• Chassis preparation was to the skilled hands of legendary metal fabricator, Ron Fournier
• Suspension duties were left to Mac Tilton
• John Knepp of Electramotive Engineering built the motors for Different Drummer Racing

 

 

The DDR Z in action at Portland International Raceway in 1979:

 

You can read more about the official history on this Z as documented by Glenn here:

1974 IMSA GTU 260Z – Official History

 

 

As usual, Glenn’s painstaking efforts and diligence result in a faithful restoration…where parts are not available he has gone to extraordinary lengths to re-create pieces from historical photos…all from his garage at home.

 

Thanks for your support Glenn! We we will be rooting for you at the Monterey event!

 

Z Car Garage CV Axles

Over 130 sets of our ZCG CV Axles are installed in client’s cars all over the world. For more information please visit our detailed post our HERE. Below are just a few examples of race cars running out CV Axles:

Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:

Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:

  

Set #247 – installed April 2018 on the 260z

  

Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.

  

 

At Z Car Garage we love keeping Z’s on the road. From concours-level restorations to light refurbishments, making a client’s goals reality is our passion. Richard W brought his 1971 Datsun 240Z from Eureka, Ca for a full mechanical restoration, ZCG-style. Our Z Car Garage Big-Brakes, Z Car Garage CV Axles and Z Car Garage Heat Shield along with a new drivetrain and full suspension transformed this Series 1 S30.

  

In 2017 Richard contacted us to inquire about restoration work. He understood we were booked, and we spoke again later, but this time he visited the shop with a photo album filled with photos of his beautiful, Sunshine Yellow Z.

“I did my due diligence and researched what ZCG could do, and arranged for a meeting with Rob to discuss my car. I asked if he would be interested in restoring my 1970 240 Z.  He was pretty adamant, ‘I don’t restore those rust buckets anymore.’ A little disheartened but I persisted. Would you take a look at the album I have of my car? He flipped through he pages and you could see him light up and the enthusiasm came forth. He said, ‘Where is the rust?’. I told him there was none as the car has been indoors for the last 40 years.”

 

Rob and Richard agreed that since the exterior was in great shape ZCG would perform a mechanical restoration. Richard is in his 70’s and still practices dentistry in the small town of Eureka. After being parked for decades he trailered the Z down and arrived at ZCG in January 2018 . Here is VIN #12291, with 63k original miles:

 

He bought this Z brand new 12/70 and absolutely adores it, being an integral part of his life for half a century! We love the story behind Richard’s Z lets’ take a look before going into the mechanical work…

Life With The Z

 

“We all have defining moments in our lives and those moments need to be prioritized. The marriage to my wife of 50+ years is of course the most important moment. She provided the resources to live in San Francisco and was so supportive of my graduation from college. That same year she became pregnant with our first born. We moved to Eureka at the same time. I was able to start my own business in 1970 and begin an adult life. All the important hurdles were checked off. We moved to Eureka with $300 in our pocket and a mountain of debt. But wait, there was one more hurdle…”

 

“…From across a parking lot, in Eureka no less, stood a bright yellow Ferrari. Upon closer inspection I was even more baffled. What was a Datsun 240Z?  I went to the local Datsun agency, long before Nissan came along and made my inquiry. Yes, the new 240Zs are very special and very desirable. They were being shipped in but there is a waiting list. Just add my name.  Sure enough they called a few weeks later and said there was an Orange Z on the lot. They made the mistake of letting me wring that car out and I was sold. While I was in school in San Francisco, I saw Cobras and Porsches that cost $6 – $7,000. Way out of my league but I could afford the $3,600 Z. Even if it meant borrowing $1,200. In early December 1970 I took possession of my Z. It became my car and my identity. It has remained just that for the last 50 years.“

 

“My oldest son was born the following February. Now all the pieces for my life fell into place. Marriage, college, moving to a permanent home, birth of our son and the final piece, my sports car. Being a young family in the ‘70s was simple. We just put Jason between our two seats the Bull Dog in the back and off we drove. No thought of a car seat. Before he was six months old, we had been the 700 miles to San Diego and the 700 miles to Canada. Not a care in the world and a wonderful way to see the country.” 

 

“My car was a daily driver. For the next 20 + years that was my car. As my boys grew up and learned to drive, I needed to provide a car for them for high school. Well, not my car.  So, I bought them an upgraded and modified ’71 240Z. I bought the Z because I felt they would be safer in that car. I didn’t want a larger car they would put a lot of friends in. Later on, I heard they actually had put 5 guys in the Z car.” 

 

Of course, over time, tastes changed and Richard succumbed to buying a 1992 Corvette. You know, the ones you fall into and climb out of. Fast forward to 2015 and his 240Z is in the garage, covered with the things a guy collects in a garage. The ‘vette became useless and the family all preferred the Z. This is where ZCG becomes part of Richard’s Z car journey. Let the mechanical restoration begin on this Series 1 that has not run since 1985…

Drivetrain

 

We got the original L24 with SUs running after sitting for years, but Richard wanted more power and Rob suggested a Rebello 3.1L engine. Supporting parts included an MSA 6-into-1 header, ZCG exhaust system, internally regulated 280ZX alternator, 280ZX gear reduction starter, KOYO race radiator (custom upper hose) and Z Car Garage Heat Shield. Here are a few pictures of the engine build/installation with many more in the gallery:

 

Powdercoated and plated parts adorn the engine:

 

Induction is handled by triple-Mikuni PH44 carbs on a Harada intake manifold.

   

Beneath the triple-Mikunis is our Z Car Garage Heat Shield, serial #00250:

 Before/After the engine bay restoration, more details below:

 

To handle the power from the 3.1L engine we replaced the stock transmission with a Nissan KA24 (FS5W71C) transmission. This was a common swap (before the CD009a came to market) performed by modifying a 280Z L-series bell housing. The KA24 unit is significantly stronger than early S30 transmissions.

 When we upgraded the transmission we also installed a JWT HD clutch with aluminum flywheel. Helping put the power down efficiently is an OS Giken LSD. The R180 houses a 4.11 R&P and the assembly is setup in-house (by Joshua Corwin). Rounding out the drivetrain upgrades are a set of Z Car Garage CV Axles (shown below)

  

Engine Bay Services

Richard’s Z received a total engine bay restoration. Please visit the gallery below for more pictures documenting the engine bay restoration work, it’s where our efforts shine!

 

With the engine/transmission removed we focused our efforts on restoring the engine bay.  Everything was cad plated or powdercoated.  All new fuel hoses, every cooling hose and all new hydraulic lines. Every nut/bolt is bagged and tagged before re-plating.

    

The Z’s body had been painted once before but the engine bay was left un-touched. We called upon our man William from William’s Auto Body re-spray the 919 Sunshine Yellow and it turned out fantastic. Before/After:

     More before/after shots showing fuel pump, hydraulic an coolant lines:

   

With the new engine/transmission even more detail work was performed:

 

Final Before/After in the engine bay:

 

Our ZCG Exhaust system using 2.5″ piping to a stainless resonator and Magnaflow muffler with slash-cut tip. Listen to the sound in the video below!

Dyno Tuning

 

Rob dyno tuned the Rebello 3.1L engine making a stout 199hp/221tq to the wheels. Enjoy the L-series music in this extended video of Richard’s Z including dyno runs, test drive with Rob and drive-bys:

 

Suspension

 

Richard’s chassis was treated to a full suspension rebuild with new parts, bushings and a full coil-over (Koni struts with our spring rates) suspension from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff. They make some of the best suspension parts out there for Z cars.

  

New parts included the T3 adjustable T/C rods, T3 rear control arms, T3 front/rear strut tower bars, new ball joints, new front bushings, all new bearings and seals and ST sway bars. Richard wanted a fantastic driver that was worry-free. We replaced all of the hydraulics and front/rear suspension assemblies to match the new driveline.  All suspension was either zinc’d or powdercoated:

 

Front Suspension refresh with T/C rod, crossmember and steering rack detail:

       
Rear end with T3 lower control arms and ST Sway bar:

 

 

Richard was ecstatic. It was the reaction we live for at ZCG:

 

We promised our readers a full, zcarblog.com report on Trevor’s 280Z after it was featured on Hoonigan Autofocus with Larry Chen. Let’s take a closer look at this fantastic daily driver+canyon carver showcasing our Z Car Garage Big-Brakes, Z Car Garage CV Axles, CD009 Six-speed transmission and more.

 

The Next Big Thing

 

It’s no secret that S30 chassis values have skyrocketed in the past few years. While the 240Z commands top dollar it has become out of reach for many enthusiasts. Not to worry, Datsun offered the 260Z/280Z models and both are great, attainable chassis in the S30 world. Trevor shares how he found his 280Z:

“I met my Z in almost completely stock form with 94k original miles. I travel for work, ending up in a new town every 6 months or so. As soon as I had an inkling of where I was going to be sent next, I would start hitting the internet classifieds for a 280z. While the 240z had seductive weight savings over the later versions, my attention turned to the 280z for its fuel injection (with constant travel I didn’t want to have to tune carbs), it’s price/ availability, and they are easier to find with air conditioning.” Below, left is the night Trevor bought his Z:

 

“I found my silver Z in Phoenix, Arizona. The only things it had on it that weren’t original from the Hiratsuka factory were the wheels, springs, and Toyota 4×4 front brake calipers. The rest of it was stock, and most importantly, complete. I did a little work to get it running smoother, basically replaced all maintenance items and swapped out a few sensors that weren’t working, and then drove it as much as I possibly could.”

 

Trevor was looking for a shop to take care of his 1978 Datsun 240z and heard about ZCG from a shop tour with Larry Chen on this episode of Hoonigan Autofocus (Thanks Larry!). Trevor brought the Z in last summer and we performed a full inspection before upgrades.

“I chose to send my Z to Z Car Garage after watching Larry Chen’s Autofocus episode on the shop. I could really tell that Rob had a ton of passion for what he does and I knew I could have confidence with him at the helm. Before I had showed up at the shop, Rob and I had talked on the phone about doing the brakes, control arms all the way around, and a couple of other smaller things. I wanted it to handle as best as it possibly could and that meant stopping when it should and having the adjustability in the control arms to set up a proper alignment. ” 

 

 

Trevor is impressed with the braking performance:

“I quickly found out that even after just a short spirited mountain drive, the Toyota brakes would get hot and fade. It didn’t help that after getting a taste for driving her quickly, I wanted to do a few track days in the future. I knew I wanted a brake upgrade, one that I would only have to do once. After getting back to Southern California I was really able to put the car through its paces on the canyon roads. The ZCG Big-Brakes proved their worth and were consistent and didn’t fade even after a few good rips up and down the mountains. This car sticks to the road insanely well. With the alignment and new tires it just carves.”

Panasport Wheels

Complementing the new Big-Brakes on Trevor’s Z are Panasport wheels! We replaced the aftermarket wheels with 16×7 Panasports and sticky Bridgestone RE-71R tires in 225/50/16. The Z was fully aligned:

Rob dyno tuned the L28 with OEM EFI. Baseline was 133hp/149tq and with Rob’s tuning it made 143hp/159tq at the wheels:

 

Enjoy the dyno run video below:

 

 

 

Our customer Randy Jaffe’s incredible Nissan/Datsun collection is featured on the latest episode of Hoonigan Autofocus with Larry Chen. Join Randy and Larry as they walk through his collection and discuss street and racing cars from the past. This is a diverse collection you won’t want to miss, enjoy!

 

 

 

Many of our clients perform work on their Z cars by themselves, and we love to help when they are ready. Kai N installed a bunch of parts on his 1972 Datsun 240Z and got to the point where he didn’t feel comfortable taking it further. He took his Z to several local shops and was not getting it sorted so he visited Z Car Garage. We got him dialed in by sorting out his Weber carbs, brakes and fuel system. Our ZCG Heat Shield also graces his induction setup.

 

“A while back I installed triple DCOEs, headers and exhaust. I got some professional help to get the car running, but it was not quite right, so I knew my next call would be to ZCG. But before I made the call the pandemic hit, I found myself with a bit more free time and started working on other bits of the car. I ended up working on the cooling system (new radiator, electric fans), fuel system (electric fuel pump), new brakes and suspension.”

 

Z in the Family

Kai shares his Z history:

“The Z belonged to my Uncle Donnie until the late 90’s. He sold the car to our local mechanic. I’ve always wanted a Z and my Dad always reminded me where I could find Uncle Donnie’s old Z if I was ever ready to own one. When I was finally able to acquire my dream car in 2017, I asked the mechanic a few times if he would sell me the car while I was shopping for a Z, but he was on the fence about it. BTW I think he had 2 or 3 Zs at the time. After a few months of me bugging him, a generous offer and my uncle (along with his friends) putting in a few good words on my behalf, he was finally convinced to sell me the car.”

“I will never forget that after I purchased the Z, my Dad told me a story. Before my uncle sold the car to the mechanic; Uncle Donnie had asked my Dad if he wanted the Z. I was a few years from being old enough to drive and the Z could have been my first car. Of course, my Dad declined the offer. I got my Z, it just happened 20ish years (and a lot of $) late.”

 

Mechanical Sorting

  

Kai wanted us to address a list of items and we knocked each one out. Littles things like installing a temperature sensor, replacing motor and transmission mounts, re-wiring his fuel pump and new rack bushings were taken care of. We also sorted out his braking system and nut/bolted the entire suspension followed by a full alignment.

 

The engine bay was cleaned up, drive belt replaced and we sorted the Weber carbs. Kai purchased one of our Z Car Garage Heat Shields and we modified it to work with his throttle cable linkage:

 

More info on our ZCG Heat Shield below:

ZCG Heat Shield

We are excited to offer the Z Car Garage Heat Shield for your triple-carb’d L-series Z car. This is a one-piece 304 stainless unit with laser-etched serial number. Proven on all of our L-series engine builds and dyno testing.

  

This heat shield will fit Mikuni, Weber, Dellorto and Jenvey induction with several intake manifolds like the Harada:

  

Dyno Tuning

 

The triple Webers were dialed in on the dyno. With Rob’s tuning the Z went from running poorly to running well, making 141hp/141tq to the wheels:

 

Listen to that L-Series music on the dyno:

Kai is really happy with the work we performed:

“It’s a completely different car. It still needs work, but I can finally enjoy the car. I didn’t want a track car or a pristine show car, I simply wanted my Z to be something that I could enjoy. ZCG brought the joy. My Z’s journey isn’t done, it will continue to evolve and I’ll be counting on ZCGs help. I approached ZCG without much of a plan. I think Rob and crew formulated and executed the perfect plan for me (and my budget). The car is fun and safe, while having potential for more growth.  I had not driven the car in 2 years, So I’m sure you can imagine how happy I was.”

 

What’s next for Kai’s Z? He’s driven Mrs. Butters, our 1971 shop 240Z and he is returning to ZCG for our ZCG Big Brakes!

“My experience at ZCG has been amazing, I’m pumped for the next step in my car’s journey. ZCG BBK is next for me! Also being at the shop is cool too, there is always something there that blows my mind (like the BRE Z or the IMSA).”

 

Thanks for your support Kai, we are honored to be a part of your Z car journey!