At Z Car Garage we are huge fans of the Nissan 300ZX Twin Turbo, the underdog of 90’s Japanese supercars. Sure the RX7, Supra and NSX get all the attention – but the ’90-’96 Z32 (yes we are biased) represents the best balance of performance, reliability and comfort.  From the intimate feeling of the power leather seats and gauge cluster to the addictive power that evokes a familiar Nissan commercial…

…the Z32 is magical. It is hard to describe how rad these cars are after ZCG has gone through one. Let’s take a look at our customer Patrick’s 1994 Z32 and see of what our 20yrs+ of experience with this chassis can create.

 

Patrick’s Z has been with us for almost a decade, receiving maintenance and upgrades along the way. In 2017 he got into a fender bender and brought it in for repairs. We took this opportunity to replace the control arms, install some loaner Z33 wheels and have William install a full JDM front bumper with sided markers and Powertrix fog light ducts. He also repaired the right front fender and blended existing paint work:

 

Notice the J-spec tail lights, one of our favorite aesthetic mods and it looks so good on the black Z32s.

 

We installed them and the center panel replacing the factory units:

 

William really knocked it out of the park with the paint work.

 

Stoptech Big-Brakes

 

As every Z32 owner knows, the stock brakes just aren’t up to the task. More power exacerbates the issue and you know how we feel at ZCG:  It’s Stoptech Or Don’t Stop At All.  Patrick’s car had larger than factory wheels allowing us to install the 332mm Big-Brake Kit using red calipers and rotors.

 

Stock vs Stoptech

 

At the rear, stock Z32 calipers were paint-matched to the Stoptech red up front.  Sport kit slotted rotors with 309 pads and SS lines throughout:

  

In addition to their function, the Stoptechs look nice too! One of Patrick’s wheels was damaged in the accident we replaced them with a set of SSR GTx-01 18×8.5F and 18.×9.5F. Finished in flat black with center caps running Bridgestone 007a 245/275 tires and Volk Racing lugnuts:

Details

 

Patrick’s interior needed attention with a new passenger side window motor. We also installed new rack bushings and detailed the entire car.

 

Power Upgrades

 

With the front end off it was the perfect time for power upgrades: JWT clutch/flywheel, Ashspec Massive intercoolers,  Selin translator dual MAF and BDE Performance motor mounts to allow for Ashspec 2.5″ inlet piping.

 

Exhaust upgrades included a full SpecialtyZ 2.5″ exhaust with single outlet option:

 

On the dyno Rob tuned the Z making 349hp/375tq to the wheels on 91 octane:

 

Thanks for bringing your 300 to us Patrick and Long Live The (Twin Turbo) Z! More pictures in the gallery below:

…[read more]

 

We have several exciting projects at the shop that will get full reports on zcarblog.com. This is only a brief sample, please tune into our Instagram story for more sights and sounds.

Return of the #46 BRE Datsun 240Z!

 

The BRE #46 Z is back from paint by our man William and it is finally getting the hand-painted livery applied at the shop as I write this. You may recall that the Z was flipped on to its roof with John Morton at the wheel racing at the 2019 Classic 24hr race at Daytona International Speedway

 

The Z will be re-assembled, dyno tuned and tested in a few weeks at Sonoma with our hero John Morton and Rob Fuller! Super amped to see #46 back in fighting form and very happy for owner Randy Jaffe. Check our IG story to see the livery being applied by hand, this is a lost art and incredible to watch.

 

1970 Salt Flat Racer Datsun 240z

This historically significant 1970 Datsun 240z was built by a team of Nissan employees to compete at Bonneville in the F/GT class. In 1976 their efforts resulted in a new land speed record of 166.037 mph, which stood unbroken until 1985. This Z resided in the Nissan Museum and is now in the care of Randy Jaffe. Lots of neat details the Z 432R seats and G-nose. More to come! Big thanks to Randy and Nissan for letting us bring this Z back to life. We just finished the exhaust and dyno tuning,

 One of many Z32s we are working on, Steve’s will get a full report soon as well as the Stillen SMZ:

 

Jim’s 1971 Datsun 240z returned for a Rebello 3.2L with triple-Mikuni carbs on a Harada intake and CD009a 6-speed transmission:

     

Several S30 Z cars are getting our Z Car Garage Big-Brakes (for small wheels) like these two 280zs:

Ed B’s 240z and a pretty 280Z

 

Khang’s Z getting a 3.2L with Jenvey ITB EFI and our Z Car Garage Big-Brakes (for small wheels) plus our Z Car Garage CV Axles.

 

The OMS Pace Car

This is a 1972 Official OMS Pace Car Duplicate. It is at present one of only two known survivors. Fifty were originally produced by Nissan Motors to commemorate the DATSUN 240Z being selected by the Ontario Motor Speedway to Pace the 1972 “U.S.A.C. California 500 Championship”. This one belongs to our long time customer and friend Linda. More to come!

B-Sedan Datsun 510s!

 

Larry Oka’s B-sedan is getting built and prepped with our Z Car Garage CV Axles. The Corky Bell 510 is also scheduled for a full restoration:

 

R32 Skylines!

 

Mike’s R32 GT-R is back for turbo, fueling and exhaust upgrades, full report soon! #TETUESDAY

 

We just got this really clean R32 GTS-T in:

Dyno Tuning your 350z/370z/Q/G

We have been dyno tuning your late model Nissan/Infiniti sports car daily. Bolt-ons, UPREV tuning, “popcorn” maps. Our customers leave happy with more performance. Call us to schedule an appointment! Here are just a few cars:

 

LONG LIVE THE Z! Check out our Instagram story for more updates!

 

Arsia has been coming to Z Car Garage for over 10 years with his 1994 Z32 Convertible. This was his first car and it has been a pleasure helping him maintain and modify it.

“When I first went to ZCG I was incredibly happy to have found a place that I could completely trust with my Z. Working with Rob is like finding a doctor that you trust and listen to any advice they give.” 

  

“I got the Z in 1996 while I was in high school. My parents were open to me getting a sporty car, but nothing too crazy. I have an uncle in San Diego that sold used cars and he told my parents he had a great deal on a used 1994 Convertible Z. Lucky for me, my parents had no idea what type of car this was, but assumed it was something mild given my uncle was recommending it. In high school the car was used in one of our school parades. Today, the Z is still my daily driver and me and my girlfriend love taking the car out together on weekends for a drive or road trip.”

 

Making It His Own

Over the last decade Arsia would come to the shop for little projects, slowly giving the 300 his personal touch and building a really nice convertible. The body received a KarumaZ rear spoiler and we called upon our man William from William’s Auto Body to mold-in the side skirts and correct paint work.

 

Engine

At 93k miles, routine maintenance and upgrades commenced. We fixed all the little things he asked of us and performed timing belt services. Power upgrades included JWT 400 cams, POP charger, JWT ecu (tuned by Rob) rob tune, aftermarket cat and a SpecialtyZ 2.5″ exhaust:

 

With Rob’s dyno tuning the VG30DE made 206hp/185hp at the wheels. Solid gains of 24hp/34tq from baseline!

Suspension

Early on we installed Tokico 5-way shocks with an Eibach pro-kit, SPL T/C Rods, z32 rack bushings, and Stillen sway bars:

 

In 2015  we upgraded to TEIN Street Flex coil-overs with EDFC and GPS active suspension:

 

More maintenance followed with  a new convertible top, smog, fuel hoses, 02 sensors and oil change in 2016.

 

In 2019 we replaced the injectors,  cleaned up wear and tear. The transmission got tired so we did a Level 1 hot rod unit with torque converter. 10 years had passed so we serviced timing belt:

 

Stoptech Big-Brakes

 

As every Z32 owner knows, the stock brakes just aren’t up to the task. More power exacerbates the issue and you know how we feel at ZCG:  It’s Stoptech Or Don’t Stop At All.  Arsia’s Z got the 328mm Big-Brake Kit using red ST40 calipers and slotted rotors. A Stoptech sport kit in back with color matched stock calipers completes the system:

  

Wheels

Wheels make the car. Arsia had a set of  OEM (’05-09) 18″ Z33 wheels on the 300. After much research, in Fall 2019 we ordered a set of Volk CE28N SL 18×8.5 front, 18x 9.5 rear finished in Pressed Graphite:

“Finding the CE28N wheels was a long hard process that honestly took hours of research over many days (thankfully Rob was there to help). I kept looking through tons of sites and hundreds of wheel options. Wheel after wheel either didn’t fit, had been discontinued, or wasn’t available in the color I wanted. I knew that whatever wheel I chose would be on the car for 10+ years, so I wanted to ensure it was high quality, extremely light and matched the aesthetics of a pearl Z. I was soooo happy with the result and the help from Rob to really perfect the look of the car.”

The CE28N wheels are light, at 17.8 lbs and they they look fantastic against the pearl white and gleaming Stoptech calipers behind those iconic spokes.

 

 

An alignment was performed after wheels/tire installation and we also installed center caps. The SL series wheels are not designed to accept a center cap so we used a hub adapter for that icing on the cake:

“The thing that I’ve loved with my journey with Rob is that not only is the car well maintained after being 26yrs old, but that it just keeps getting better. With the addition of Stoptech brakes, TEIN suspension, new cams, transmission upgrade, etc, the car feels better than new, while still being a capable daily driver. Rob really knows what maintenance and upgrades work best!”

Enjoying the Ride

 

Arsia can be found cruising around the Bay Area backroads, top down Enjoying The Ride. We love that after all these years he’s still passionate about his 300. More pictures in the gallery below!

 

“Rob is always super knowledgeable and understands what your goals are. I love the fact that he knows these cars so well and his top priority is having customers drive away with a smile. Every single time I’ve got the car back after service, I feel the same way I did the day I first drove the car….just grinning ear to ear! I really am thankful for the entire ZCG team, if it wasn’t for them, I truly don’t know if I would be able to still have this car today.”

Thank you Arsia, it’s been an absolute pleasure working with you. Long Live The Z!

…[read more]

 

Andreas visited Z Car Garage to get his 1983 Nissan Skyline running correctly. We admire these 80’s gems, working on several DR30 Skylines and with a few tweaks plus dyno tuning Andreas was back on the road in proper form.

The Sixth Generation

 

Not familiar with this right-hand drive specimen? Most Americans are familiar with the classic 70’s Skylines and later GT-R series, but this 6th generation (R30) chassis is often overlooked, yet very special in its own right. Andreas’ model is a ’83 Nissan Skyline RS-X and it’s the first iteration of the distinctive “Iron Mask” front end. This generation also marked introduction of the FJ20 engine, though Andreas’ is an early, non-intercooled model:

 

In Japan the R30 sold well and had a great following with Nissan enlisting the famous actor/racer Paul Newman to appear in ad campaigns. The R30 also formed the basis for the insanely cool SuperSilhouette race car:

   

DR30 Ownership

 

With its angular styling, pillar-less windows, killer graphics and FJ20 power what’s not to like? Andreas had been wanting a DR30 for the past 10+ years and after driving Reid’s DR30, it motivated him to finally get one:

“With the help of The Import Guys, I purchased it from auction in June and picked it up in November in Washington and drove it straight home to Northern California. 2 days, almost 1000 miles and it did it perfectly. I have been fixing a few things here and there like a new front lip, interior trim, suspension, brakes and threw back on some OEM parts but my journey with the car is still young. I have auto-x’ed it already and do have my eyes on potential track days.” 

 

Andreas was having problems with the car not revving properly and recalled his discussion with Reid (thanks!) about his and getting work done at Z Car Garage:

“I reached out to Rob for help. Kind of funny, on the day of the appointment to get this issue checked out my car broke down a mile from the shop and he was nice enough to help me tow it there. I have pretty modest goals, I just want a good looking, fun to drive DR30. This one has its issues like most 35+ year old cars but the idea was to get myself a nice project (but a driver). No need for a beauty queen, and no real need for massive power. Give it a refresh, and then just drive the hell out of it.” 

Skyline Sorting at ZCG

 

Since purchasing, this R30 was not running correctly so we started troubleshooting the fuel system. We figured out some of the issues (bad fuel pump, running extremely lean, no fuel getting to motor) and we got Andreas running.

 

Despite new injectors, fuel filter, fuel pump we kept hitting these limiters. The factory ECU wouldn’t allow it to rev over 5krpm so we called our friends from JWT.  Clark Steppler is the master of all vintage ECUs and he worked his magic on the delicate, vintage unit. As you can see from the dyno plot we have full rev range power/tq.

 

Dyno Tuning

  

Rob dyno tuned the FJ20ET, now with full power available to redline it put down 178hp/158tq to the wheels. Impressive power for the time, with a hot-pipe. Nissan really was special in the 80’s!

 

Enjoy this video of the dyno run and Andreas enjoying the DR30:

 

While the Skyline was here we replaced the front control arm bushings with new Superpro bushings:

 

Andreas was driving the car when he felt a loss in power. We discovered a boost leak in the hot pipe and resolved it. In Andreas’ words “No issues now and car runs like a dream.”

 

Enjoying The Ride

 

With the engine sorted Andreas has been driving his Skyline everywhere, happily boosting. Ps…did we mention how good it looks on the Longchamp wheels?

 

He even made it out to the recent Norcal Skylines Matsuri 2020, an event we were lucky to attend last year:

 

“I want a car I can have fun with and drive hard), not something that I just take to cars and coffee. So I appreciate all the help he gave me to get my car back up and running and back to its former glory!”

 

Thanks for letting us work on your DR30 Andreas. We love the direction you are taking it!

More pictures in the gallery!
…[read more]

 

Z Car Garage is expanding to support our vintage, late model and motorsport work. We are seeking an experienced and skilled automotive technician to join our team with two open positions available. This is not an average automotive job. We work 4-10hr days and offer competitive pay/benefits.

Requirements: Automotive experience, your own set of tools, willingness to learn, and be part of a team.

Nissan/Datsun experience is NOT a requirement, you just need to have passion.

Interested or know someone who might be a good fit? Share this, spread the word and please contact rob@zcargarage.com or call us at (408)452-0350.