We love to see owners installing our Z Car Garage CV Axles on their Datsuns, especially from overseas! Peter installed a set himself on this 1977 Datsun 280Z at his home in Halmstad, Sweden.

 

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 200 CV axle kits on customer cars and we are stoked with all of the positive feedback.

  

Peter has CV axle set #0323 and we are happy to report that he installed them himself with ease:

“The installation was very easy, the axles even came pre-greased ready to bolt in. There was even some red Loctite in the box, great! The axles look very sturdy and I’m sure they are going to last me a life time. An axle failure is the last thing I want, especially since spares are so scarce here in Sweden. Money well spent in my eyes.”

  

He sent us a few pictures before/after replacing his old half-shafts. Nice work!

  

Peter is really happy with the CV Axle performance, under all driving conditions:

“Hi Rob,

I got my car running yesterday. Must tell you that I love your axles! After installing them I’ve got zero vibrations in the drive line. Used to have some at 70mph+, especially during acceleration which I suspected coming from either the prop shaft or drive axles. I’m very happy! 

Have a great weekend”
Peter

 

 

Dreaming of Zs

 

There are around 130 registered S30 Z cars in Sweden, they sold so few that importing is basically the only option, and most registered today are. Peter shared his Z story with us:

“I had dreamt about a S30 for a long time. Driving modern cars on track for the last few years had me longing for something more analogue. S30s are few and far between in Sweden so importing one seemed like the best option. I bought it early 2019 from a car dealer in the UK, they had imported it from Jacksonville, Florida. Here it is after picking it up at the harbour” 

 

Driven Hard with L-Series Magic!

 

The car was a real survivor with almost no rust, but a very worn engine. Peter’s initial plan was to tune the stock engine, but in the end it was easier to buy a complete unit. He had Datsun Spirit build a Stage 4 engine:

“I like their philosophy with low rotating mass and how they build their engines. I had many emails back and forth with DSI discussing how to support the engine, and everything they said turned out to work great. I really believe that the engine is the heart of the car, so any other engine than a L-series was not an option to me.  Jenvey DSI ITB 50mm throttle bodies and fuel injection are controlled by an EMU Classic from ECU Master.”

 

Peter did the engine swap, but the final installation, wiring and tuning was done by a local reputable shop called JMB Optimering in Halmstad, Sweden. With a Kamaeri 6-3-2 header and custom 3″ exhaust they managed to extract 298hp @ 7500rpm at the rear wheels from the DSI Stage 4 3.0l.

 

Backing the ~300whp L-series is a 280ZX 5-speed transmission and upgraded suspension from Techno Toy Tuning. At the rear, an R200 diff with Quaife LSD an our ZCG CV Axles helps put the power down. Sparco Sprint seats keep him in place on the track.

 

Peter has been Enjoying The Ride on the street and track:

“All the work with the car has led to a lot of time spent in the garage, but I took one thing at the time so I have still put around 4000 miles on it since I got it. The idea is to have a summer car that can be used on the track regularly and on the back roads. This season the car will be used in a local sprint cup, consisting of five events, plus a few trackdays. I love driving on the Nurburgring, a place I frequently go to, and the plan is to take the car there as soon as the COVID situation is under control.”

DreamZ Come True at the ‘Ring

 

Peter recently drove his Z on the famous Nürburgring Nordschleife and shared his amazing experience with us. Yet again he put our Z Car Garage CV Axles to work at the magical track. Listen to the Z sing in this video from the Nurburgring and past autocross events, VOLUME UP!

 

Peter’s report from the ‘Ring, enjoy:

“This year I realized a dream. Ever since I bought my 280Z I have wanted to drive it on the Nürburgring Nordschleife. But as usual during the rainy and snowy winter months in Sweden, you try to do all the maintenance and all fixes during that time. And as usual everything always takes longer which means there wasn’t any time for any testing before sending the car to Germany. The trip to the Eifel mountains and Nurburg is around 900 miles for, and this time I put the car on a transporter.“

“So after meeting up we spent some time bleeding the brakes, fixing new harnesses and off I went to the gas station. One of the things changed on the car this year was a new fuel tank from s30 world, and when I started filling up, a lot of fuel was dumped on the ground. Ok, time to get the tools out again, thankfully it was a quick fix with a ventilation hose. All this time I was in a little bit of a hurry because I also wanted to tweak my alignment, and time was running fast to make that appointment.”

 

“On the Nordschleife you want a very stable car due to the high speeds and high loads. You can say that in general a setup with more understeer is preferred, and that’s what most people run. The last thing you want is a car with a nervous rear end going over a crest turning at 150mph. I arrived at the race shop just in time, and the tech doing the alignment notice play in my inner tie rod ends. He says: ‘Don’t drive like this’. Great, I have shipped the car all the way here and it was just a waste of money…After some consulting with some other people I trust I decided to drive, ‘just stay off the curbs!’ Like that’s not going to be in the back of my mind…”

 

“Apart from the play in the steering creating variable toe (which is very interesting to drive with) the car worked great. The power and response is great from the DSI engine, no troubles what so ever. Just check the oil and fuel up! The Z Car Garage CV Axles have been working so well, absolutely no vibrations in the rear end!”

 

As expected, the Z garnered plenty of attention and Peter was shocked at the positive comments. The ‘Ring is also known for an incredible variety of sports cars to admire….

“I’m so happy to have driven the Datsun on the Nurburgring, and it’s a thing I’ve been thinking about constantly since starting this project. I have never gotten so much attention with a car, it just makes everybody happy. In Europe it’s a pretty rare sight, and to drive it on my absolute favorite racetrack is a thing that will be repeated again. I’ve been going to the ‘Ring since 2010 and have a few laps under my belt , and I’ve never had this much fun in a car ever. The Nurburgring is a magical place, there just isn’t any place like it anywhere.”

 

 

Mark your calendars for June 5th to celebrate Z Owners of Northern California (ZONC) 50th birthday at the Blackhawk Museum in Danville!

 

The Z Owners of Northern California (ZONC) is one of the oldest Z car clubs in the nation. In its prime they had over 600 members with close ties to Yutaka Katayama (“Mr. K”) and Nissan USA. Of the many events and fun runs they host throughout the year, the famous Blackhawk Museum will be the venue for the June 6 birthday party.

 

Local Datsun specialists/racers Troy Ermish and Rob Fuller will be displaying their race cars. Datsun and Nissan cars will be on the plaza and lower lots for everyone to see. Z you there!

 

 

 

 

 

Richard W brought his 1971 Datsun 240Z from Eureka, Ca to Z Car Garage for a full mechanical restoration back in 2020. Our Z Car Garage Big-Brakes, Z Car Garage CV Axles and Z Car Garage Heat Shield along with a new drivetrain and full suspension transformed this Series 1 S30.

 

With a few thousand miles on the build Richard visited ZCG earlier this year for routine maintenance. We changed the fluids, resolved a charging issue, checked the driveline and overall health of the Z.

 

While the Z was with us we performed extensive road testing with acceleration, freeway cruising, dyno runs and more all shown in the video below. Turn those speakers up and enjoy!

 

I could not resist taking more photos of the engine, interior and chassis on this gorgeous Sunshine Yellow Series 1. Enjoy some photos from his recent visit and of course zcarblog has the full report on our restoration of Richard’s Z.

 

Drivetrain

 

We got the original L24 with SUs running after sitting for years, but Richard wanted more power and Rob suggested a Rebello 3.1L engine. Supporting parts included an MSA 6-into-1 header, ZCG exhaust system, internally regulated 280ZX alternator, 280ZX gear reduction starter, KOYO race radiator (custom upper hose) and Z Car Garage Heat Shield. Here are a few pictures of the engine build/installation with many more in the gallery:

 

To handle the power from the 3.1L engine we replaced the stock transmission with a Nissan KA24 (FS5W71C) transmission. This was a common swap (before the CD009a came to market) performed by modifying a 280Z L-series bell housing. When we upgraded the transmission we also installed a JWT HD clutch with aluminum flywheel. Helping put the power down efficiently is an OS Giken LSD. The R180 houses a 4.11 R&P and the assembly is setup in-house (by Joshua Corwin).

 

Engine Bay Services

Richard’s Z received a total engine bay restoration. Please visit the gallery below for more pictures documenting the engine bay restoration work, it’s where our efforts shine! Final Before/After in the engine bay:

 

Suspension

Richard’s chassis was treated to a full suspension rebuild with new parts, bushings and a full coil-over (Koni struts with our spring rates) suspension from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff. They make some of the best suspension parts out there for Z cars.

 

Front Suspension refresh with T/C rod, crossmember and steering rack detail: Rear end with T3 lower control arms and ST Sway bar:

         

 

Interior

 

One of our favorite upgrades to the interior of an S30 is our ZCG sound deadening package. Usually found in our full-blown ZCG restorations, the result is a less tinny sound and almost Germanic-like “clunk” when you shut the doors.

  

The stock seats were replaced with Recaro Specialist in black leather, we love these seats for the S30:

  

Please check the gallery below for more detail shots, there are too many to list in this blog post!

Enjoying The Ride

 

It was great to see Richard again and meet his wife this time, recalling how he purchased the Z new in December of 1970! We love that this restoration is out on the road and being enjoyed. It’s also a great example of how no matter how far away you live from Z Car Garage we will help our clients any way we can. Long Live The Z!

“Richard got out of the Z and told me he had bought this Z 50 years ago that week, it’s been with him through alot of stuff and now his kids and grandkids will get to enjoy it. I looked him in the eye and said I’ll be here for their chapters, any time they need me. I’m attached to this Z now too.”

  

…[read more]

 

We love to see clients installing our Z Car Garage Big-Brakes on their Z Cars! This is Mike’s 1972 240Z with original matching L24. It was bone-stock and sitting for 16 years outside until he rescued it year and a half ago. Mike is a professional automotive paint technician and this Z will be restored with correct 115 metallic blue paint.

 

Client’s often ask if their wheel will clear the ZCG Big-Brakes and we offer a a caliper template to help with fitment. Sometimes it’s best to physically test fit the actual wheel desired. Mike sent us a pretty rad Star Shark wheel from Washington and we confirmed clearance of the Big-brakes:

 “I chose the Colin Project Star shark wheel 14×8-13 for some JDM nostalgia, the look, and a bit more aggressive stance. They are wrapped in BF Goodrich 225/60r14 tires. I very much wanted to upgrade the brakes with the Z Car Garage Big-Brake Kit after seeing Larry Chen’s Ole Orange Bang done by Rob and ZCG team. Sent Rob a wheel for an accurate verification of fitment, and Huzzah!! They Fit! Very, very excited about this. You can’t just put any brake kit on this car. This is a kit that you can have confidence in because the research and development has been done.”

 We are really stoked to see Mike’s restoration progress. Thanks for your support Mike and Long Live The Z!  You can see more information on our Z Car Garage Big-Brakes and see a list of clients (over 100!) using them on our blog.

 

 

Z Car Garage is proud to bring this 1972 Datsun 240Z OMS Pace Car back to life for our long-time client and friend Linda Williams. Only 50 of these Ontario Motor Speedway (OMS) “duplicates” were created and this is one of only two known survivors .

 

Join us as we revive this historically-significant Z from its slumber to make it a nice driver for Linda while retaining its survivor status. In addition to documenting ZCG’s work we will look at this Z’s history, our relationship with Linda and share her Enjoying the Ride.

  

History and Acquisition

 

Before we dive into the OMS Pace car story let’s take a look at Linda’s Z-car story. We first met Linda in 2008 when she reached out to Z Car Garage for work on her low-mileage 1978 Datsun 280Z:

 

“I had just bought my blue 1978 280Z and had taken it over to Steven’s Creek Nissan Parts Department to have a replacement key made. One of the guys came out and suggested I show it to “Rob” at Z Car Garage.  It was my lucky day as ZONC was having a meeting and a Dyno Day at Z Car Garage! Of course, I didn’t know who Rob was and he was busy but took a few minutes to look at my Z. That’s how I met Rob and began a great friendship and a wonderful working relationship. I also joined Z Owners of Northern California (ZONC) that day too!

Linda became a big part of the local Z car community and eventually became (currently) President of ZONC, one of the oldest Z car clubs in the nation. We have enjoyed helping her keep her Z cars on the road over the years, from Car Show prep to routine maintenance:

 

“Rob has taken very good care of my car and I have a lot of respect for him as a business person. He is honest, open and I don’t feel pressured to do anything on the car that isn’t necessary. In 2012, Rob called and asked if he could ‘borrow my car’ and of course I said ‘yes’, but can you please explain? He then told me he wanted to display it at the San Jose Auto Show in January 2013. I felt honored having it displayed with another restoration Z Car Garage had done, along with many other client Z’s.” 

 

The OMS Pace Car Duplicates

 

Nissan Motors created 50 “Pace Car Duplicates” to commemorate the Datsun 240Z being selected by the Ontario Motor Speedway to Pace the 1972 U.S.A.C. California 500 Championship (shown above). The cars were originally brought over from Japan by Mr. K and were all white with red interior. The blue livery was added here in the states with the “O” that represented the Ontario Motor Speedway. After the race, the cars were given to Datsun Dealerships in the Los Angeles area as a promotion and later sold to the public.

 

Fast forward to 2021 and Linda has located one of the Pace Cars: (shown above) The OMS Pace Car in a period photo from the previous owner in Glacier National Park, and on the day Linda purchased it:

“In August of 2020, a gentleman from Porterville, CA who was handling his father’s estate contacted me and asked if our car club (ZONC) would like to have a car (actually 3 cars) donated to us. I had to explain that we were a 501(c)7 and not a 501(c) 3 and would not be able to accept them, but I was personally very interested in the Z and that began the quest to acquire it.”

 

We told Linda this was a “must buy” as the car advertised had original paint/interior, 45k miles and above all it was 1 of those 50 “tribute” cars made by Nissan. Of those 50 cars, it is currently one of only two known survivors! You might be wondering what happened to the actual OMS Pace car? This is what makes Linda’s tribute Z special, beyond its rarity…as per Carl Beck and other noted Z-car historians, the original OMS Pace Car car was this Z shown below (L):

 

Above (R) is a photo of Mr. K presenting the keys to the Datsun 240Z Pace Car to Mr. John Cooper, President of Ontario Motor Speedway. This Z was used as the Official Pace Car for the ” California 500″ held on Sept. 3, 1972. It really is a small Datsun world and amazingly this exact car is in our shop at Z Car Garage…it is none other than the Joel Anderson #49 IMSA GTU 240Z !

 

After running as the official OMS Pace Car in 1972, it was purchased by Joel Anderson from the Datsun Competition Dept. for $1.00 and Joel picked it up at Sears Point from Bob Bondurant in 1979. Joel prepared the Z for IMSA GT-U competition sporting wide aero and his iconic black livery. Yes, #49 still has the checkered flag holder in the driver’s rear quarter panel from its OMS career. We are stoked to have both Tribute and original OMS Pace Cars at the shop!

Z Car Garage Revival

 

Linda had the OMS tribute towed to Z Car Garage and we sat down to discuss the future of the car. We both agreed to keep it as original as we could, while updating critical parts to bring it back to life and make it a safe, fun car to drive. Our goal was to have it ready for the 34th Annual Z Car Convention (ZCON) in August of 2021.

“My plans are to drive the car and enjoy it as a ‘survivor car’. It draws a lot of attention and I love sharing it with the car community, and telling her story to those that haven’t heard anything about the Tribute cars. I have the paperwork back to the original owner, many invoices that corroborate the mileage and original Warranty Book with the ‘credit card’ warranty card.”

Indeed, Linda has a treasure box of period photos/records all relevant to her OMS tribute Z:

    

Engine

 

The Z had not been running since 2006 so we went through the fuel and cooling systems, suspension, brakes and supporting parts to make it a fantastic driver. Starting with the engine bay, we performed general clean-up of the inner fender/firewall areas.

 

A fresh set of Z therapy SU carbs were installed along with an MSA 6 to 1 header and full ZCG exhaust system:

 

All coolant hoses were replaced and radiator refurbished:

 

Fuel tank refurbishment with new hoses and all new evap lines:

 

On the dyno, the stock L24 made 120hp/125tq at the wheels:

 

Enjoy this video of the dyno run and a walk-around of the Z after our revival:

 

Chassis

 

With respect to the low mileage of this chassis and provenance we performed a “sympathetic” refresh to make it road-worthy. The suspension was removed and replaced with new hardware and bushings throughout. New parts from Techno Toy Tuning included adjustable T/C rods and rear lower control arms. Before/after shots below with more in the gallery.

   New tie-rods, rack bushings, and engine mounts. KYB strut inserts, Eibach lowering springs trimmed Macpherson bumps stops for full travel and a ST sway bar set:

 We rebuilt and replaced all factory brake components including new calipers with Stoptech rotors, rear drums/shoes+wheel cylinders, new wheel bearings front and rear:

     

Fresh brake master cylinder and booster:

 

 

New drum brake components:

 

Details

 

Finishing touches for Linda’s Z included completing the OMS livery. We did not repaint the car because of its survivor status. A cut/buff was sufficient, and “O” decals were sourced/applied just before heading to ZCON. As it arrived (L) and after (R):

 

Interior

 

The original interior was refreshed with a nicer set of seats from fellow ZONC members Paul and Ann Devor:

 

All weatherstripping was replaced from hatch to doors.

 

Small details like a a new shifter gasket, heater core/ducting refurbishment and window regulator sorting make driving enjoyable:

 

Enjoying The Ride

 

Linda drives her Datsuns. We got the OMS Pace Car tribute in great mechanical shape and she has been driving it everywhere on local runs and gatherings. Most recently on April 10 she joined fellow Z owner Bryan for a local Bay Area drive and the odometer turned 47,000 miles!

 

In March she completed a 300-mile Breakfast Club Rally with us in Sonoma, CA. The OMS Pace Car ran like a champ, handling the twisty roads with zero mechanical issues:

 

In August 2021 we finished preparing the Z just in time for the 34th Annual Z Car Convention (ZCON) hosted by ZCCA in Colorado Springs. The OMS car was well-received at the show, Pete Brock approved!

   

At ZCON with the new Z and track laps!

 

Photographer  Larry Chen and Rob Fuller highlighted Linda’s Z in their walk-around from ZCON, enjoy:

 

 

Did we mention that this Z gets driven?!

 

The OMS Pace Car tribute joining us at the 2023 New Z Viewing Event:

 

Linda has been all smiles:

“When I bought the car, I did not drive it due to it not being operated for so many years. The last thing that I wanted to do is possibly damage it before I even got to drive it. When I delivered the car to Rob, he went through it and did everything he could to maintain the ‘Tribute Car’ provenance, yet give me a car that I could enjoy driving. She is kept garaged, but she’s driven and enjoyed. The car drives like a “Z” and I am so thrilled that Rob did his magic with her.”

 

Thank You!

 

Z Car Garage thanks Linda for her unwavering support. We love your passion Linda and how you wave the flag for Nissan/Datsun history. The OMS Pace Car tribute is in great hands for the next generation to appreciate. From Rob:

“We live for this. Finding these hidden gems that have been sitting and bringing them back to life because Datsuns are Driven.  Linda’s Z became a wonderful driver that puts a smile on my face not only when I’m behind the wheel but when I hop out and look  back at it. How small and magical is this Datsun world where we can have the actual pace car (1 of 3) and tribute (1 of 50) in the same shop and work on them both. Thanks to Linda for believing in ZCG”

More pictures in the gallery below and…LONG LIVE THE Z!

…[read more]