Our Z Car Garage Big Brakes have been winning over Z-car enthusiasts locally and globally. Jason purchased a set for his 1974 Datsun 260Z and performed the installation himself. Before we go into his Big-Brake experience let’s hear his Z-story…

 

JASON: “I first heard about Z Car Garage by following Larry Chen’s 240z build on his YouTube Channel. I saw his various interviews with Rob Fuller and was really impressed with his knowledge and passion for the Datsun 510 and s30 chassis. Quickly, I started researching more about the pain points of the s30’s, and noted the lack of support from many other companies in the area of suspension and braking locally. The kits available were Wilwood, Endless, Star Road, among others. No complete kits that were torture tested and raced like what Z Car Garage was doing with their ZCG CV Axles , Brake Kits and other components they were selling. Research and development are key to me, and I was thrilled to see ZCG taking this on themselves. In addition, Rob is a real human being who’s on top of answering questions via email and in person at Z car events. That’s a HUGE deal to me, and it’s so rare to meet someone that of course is just as passionate about his cars as the enthusiasts building them.”

 

“My 1974 Datsun 260z is an Early model s30. When I purchased it, a few years ago I quickly removed the stock seats and reupholstered Recaro LX vintage seats in Black. I loved the netted headrest, and the clean recaro stitching at the center of the seat. I also removed the Greddy Oni wheel that was originally in the car and swapped it out with a new old stock Nardi Nismo Deep steering wheel with a Black and Gold finish. I went through the interior and purchased a NOS Datsun center console, and replaced the stock door cards with Skillard flat cards with leather pull straps.”

 

“In addition to the door cards, I added Skillard powder coated heel plates. The car came with BC adjustable coil-overs and Swift Springs which I will be updating in the near future. The BC Coilovers are perfectly fine for the street applications I’m using the car for currently. My suspension underneath the car is the full T3 catalog including the power cradle, control arms, bushings, and even their steering elements. It’s finally sorted, and I really enjoy driving the car the way it currently feels.”

 

“The car is equipped with a L28, ZX 5 Speed transmission, and 44pHH Mikuni triple carbs built by Taka at Kyusha House. The header and exhaust system are Fujitsubo Legalis R. The engine has since been updated in every way from the ignition system, oil pump, spark plug cables, and brake new seals and belt. The oil pan was replaced with a Moroso baffled racing pan with higher oil capacity.” 

  

“I have two sets of wheels and tires for the car. One set is Volk Racing TE37v custom gold 15×9 at 0 offset on Toyo Proxes R888 205/50/15, and the other set is Work Racing Equip 03 15×8.5 at -3 offset custom bronzed lip, and Gold Center on Falken Azenis RT660 205/50/15. The front bumper is a carbon MSA, and the rear tail light bezels are carbon fiber made by Vintage Carbon. The wing is a Carbon Fiber BRE spoiler.”

 

You can see Jason’s Z in action in the video below:

 

Z Car Garage Big-Brakes

  

As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:

Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)

Rotors: 280mm x 20.6 with Alum 7075 hats

Pads: Stoptech 309 sport street pads

Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.

  

Big-Brake Kits Available For DIY Install!

Z Car Garage is proud to offer our Big-Brake Kit to Z-Car owners that want to perform the installation themselves. We can ship worldwide and each kit contains everything needed with a comprehensive (40-page) installation guide. Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE. Enjoy these pictures of Jason’s beautiful S30 and his ZCG Big-Brake installation:

 

Our ZCG Big-Brake kit ships with everything needed to install and retains the factory parking brake function. Jason successfully installed the BBK on his Z with PitstopMotorTuning, and they look great behind both the Work Equip 03 and Volk TE37 wheels:

    

Beyond ease of installation and quality components, our Big-Brakes perform by offering superb pedal feel…everyone that drives our demo Z confirms! This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. Jason shares his feedback after replacing his existing Wilwood brakes with the ZCG BBK:

JASON: “The Stoptech ZCG Big-Brakes are really a solid kit. The lead time was pretty rough, but again Rob reassured me every month over the course of a year of waiting that it would be worth it. He was right! These brakes do not disappoint. Once the kit was completely bedded and broken in, I quickly put the brakes to the test on Angeles Crest highway here in Los Angeles. I know this road well, and that’s where I usually push the car at a safe limit, and see where the pain points lie. The ZCG brakes are worth every penny. They are precise, they are confidence inspiring, and also feel great under late braking situations. I had a blast carving around the canyon knowing my brakes would safely hold up. My next test would be to get a couple of track days on them, and see how they hold up under extreme conditions and multiple sessions.”

 
What’s in store for Jason’s Z?

“The goal for the 260z is to refine my current setup. The paint is a bit rough since it was a garage paint job, and I would love to repaint the whole car including the interior. At the moment, I’m building a high compression 3.1L stroker motor with Jenvey 50mm ITB being managed by a Haltech Elite 750 stand alone ECU. My goals long term are for big power, but with street car reliability. I would love to confidently do a track day, but also be comfortable driving my wife to car shows, and even to grab a cup of coffee together. The engine has a custom designed valve cover designed by myself, and commissioned to be created by BSpeed in New Zealand. Big updates to come in the new year!”

 

Thanks for your support Jason we love that you are Enjoying The Ride and Long Live The Z! More photos in the gallery below

The Last Stop in Braking for your Z

 

Z Car Garage Big Brakes are one of the best systems available for your S30 Z Car with over 200 kits sold worldwide and unanimous positive feedback. See our ZCG Big-Brakes on client cars HERE and enjoy the photos below: