We love to see owners installing our Z Car Garage CV Axles in their vintage Nissans and Datsuns. B&T Performance Retro in Thailand is running a set in three of their iconic, right-hand drive cars: a 1971 Skyline 2000GT, Fairlady Z and Kenmeri Skyline:

 

Z Car Garage is proud to offer a CV axle conversion kit for your Datsun S30 and 510. We have sold over 200 sets of axles globally, with customers installing and enjoying them on everything from street cars to full-blown IMSA racers. These CV axles will help transmit power to the ground and ensure smoother operation compared to your standard half shafts.

   

For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft. These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars. Each axle has a serial # for peace of mind and the kit comes with everything you need to install on your car.

Hakosuka Skyline

 

This 1971 Nissan Skyline 2000GT-X was restored by B&T Performance Retro featuring a 3.0L L-Series with triple-Weber induction:

  

Owner Longlom Bunnag sent us a few photos the Z Car Garage CV Axles installed:

 

We love his motto of “This is built to be driven hard, not just for taking still pictures”. Indeed, this Hakosuka sees regular track time. Enjoy this short video clip of the Hako in action:

 

Fairlady Z

 

This RHD FairladyZ features a stroker L-Series with triple-Weber induction and Z Car Garage CV Axles. Like the Hako above, it is also driven in anger:

 

Kenmeri

 

B&T Performance Retro also restored this 1973 “Ken and Mary” or “Kenmeri” Skyline. It features a similar-spec’d 3L L-Series and 5-speed transmission with Z Car Garage CV Axles. More photos in the gallery below:

 

We love seeing our parts installed and enjoyed, thank you B&T Performance Retro for your support! You can see more of their work on Facebook , and read below for more information on our ZCG CV Axles:

ZCG CV Axles

Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. These are 100% bolt-in replacing your half-shafts and does not use aluminum adapters commonly found in aftermarket units. We have over 200+ CV axle kits on customer cars and we are stoked with all of the positive feedback.

  For years we have used aftermarket CV axles that utilize an aluminum adapter prone to loosening up over time. Despite efforts to keep things tight (Loctite, hardware changes) we had to keep an eye on them. We developed a better solution that eliminates the need for aluminum adapters and remains 100% bolt-in like a factory half-shaft.

 Designed and manufactured locally with KAD Models, the ZCG CV axle kit works in both R180 and R200 configurations.

 These are the beefiest CV axles on the market. They have been tested on the track by our vintage racing customers and also in high hp* street cars (powershifting, clutch dumps, etc.). Each axle has a serial # for peace of mind:

The CV axle kit is available now from ZCG for 1595.00 + freight and they come with everything you need to install on your car. Contact us at 408-452-0350 or send Rob an e-mail rob@zcargarage.com to purchase. Installation is just like doing a half-shaft: there is even a marking that shows you where to line up bolts and special hardware:

The ZCG CV Axles in action

The video below demonstrates the “looseness” associated with aftermarket CV axles that use adapters compared to the ZCG axles without adapters. Several customer race/street cars running our CV axles are also shown. Enjoy!

 

Enjoy this video made by our client Hazel. She installed our ZCG CV Axles on her Hazel’s 1970 Datsun 240Z

 

Over 200 sets of our ZCG CV Axles are installed in client’s cars all over the world:

Supermachine in Tokyo, Japan is running our Z Car Garage Big-Brakes and Z Car Garage CV Axles in their Series Datsun 240Z:

 Race car driver, restorer and Datsun Historian Glenn Chiou is running our ZCG CV Axles in this IMSA GTU 260z race car!

 Racer Brad H is running ZCG CV Axles in his IMSA GTU race car:

 Race car driver and restoration specialist Jim Froula of Racecraft is running ZCG axles in several of his cars:Set #246 – installed May 2018 on the “Harry Stewart #52” Datsun 510:

 Set #247 – installed April 2018 on the 260z

 Set #248 – installed on Adam Carolla’s “Greg Sorrentino #90” Datsun 510.

  …[read more]