At Z Car Garage we love keeping Z’s on the road. From concours-level restorations to light refurbishments, helping a client realize their vision is our passion. CJ shipped his 1971 Datsun 240Z from Durango, Colorado for final mechanical sorting, ZCG-style. Our Z Car Garage Big-Brakes, Z Car Garage CV Axles and Z Car Garage Heat Shield along with a new drivetrain make this the Z of CJ’s dreams.
CJ’s Z Story
Before we dive in to the project let’s hear how CJ got his Z car…
CJ: “When I was in my teens I was a huge WRC fan, and rally led to my passion for Japanese cars. Video games like Sega GT and Gran Turismo also helped. I think my first exposure to classic Z cars was when I was about 17 and it was probably in a bootleg Wangan Midnight VHS that my buddies and I found at a Japanese video rental place. I’ve loved the aesthetic of the S30 since that time. It’s not an exaggeration to say I’ve dreamed of an S30 with factory fender flares, an air dam, and a 432 style wing for over half my life, but I never had an opportunity to own one.”
In 2017 CJ acquired his best friend Travis’ 1971 project car that hadn’t run since the 1990s. Over the next four years, and with significant help from his wife, the duo restored or refurbished just about every part of the car.
CJ: “We fully refurbished the dash, redid the entire interior, and mechanically refreshed the brakes and drivetrain. The exterior received new factory matching paint, new gaskets, tail lights and corner lights I refurbished, RS Watanabe wheels, and flares from Marugen Shoukai. The car also got BC coilovers, Techno Toy Tuning arms and subframe components. The L24 was replaced with an L28 and triple Mikunis, assembled in my garage. There are so many good memories wrapped up in the restoration of this car and it was a blast to learn new skills throughout the process.”
In October 2020, with the engine he built with his Dad the car drove under its own power. CJ was proud, and the moment was satisfying and exhilarating, right up until it wasn’t. He had been building drift cars since the early 2000s but the first drive of this car made it clear that if he wanted a car that was sturdy, reliable, and confident to take on road trips, he’d need to get some help from a specialist…
CJ: “And that’s where Z Car Garage came in. I’d been an avid reader of the Z Car Blog throughout the restoration and had even spoken to Rob occasionally about various issues. There was never any question as to where I wanted to send the car for finishing school. So in Spring of 2021 I shipped the car from my small Colorado mountain town to San Jose. The initial plan was to have Rob and the crew bring it that extra 10% to completion. Thankfully Rob understood my vision and suggested additional work to ensure I actually wound up with the car I’d been dreaming of for so long.”
After discussions with CJ we took on his project and he signed on to get our Z Car Garage Big-Brakes, Z Car Garage CV Axles and bring his Z to the finish line.
Drivetrain
After sorting the engine and installing brakes/suspension we were stoked to get CJ’s car running. Before hitting the dyno we always do a test drive on the street and we noticed low oil pressure on the dash gauge, despite lack of obvious noises or behavior. Low oil pressure unfortunately was confirmed with our own gauge, and so we were at a crossroads with this 2.8 engine that CJ assembled together with his Dad. A decision was made to send it to Rebello Racing for a 3.0L build and it really came alive. CJ already provided the ph44 Mikuni carbs and we installed what every triple-carbed L-series needs: a ZCG Heat Shield!
A Moroso competition baffled oil pan prevents oil starvation with high cornering loads:
Cj was having header fitment issues. We ensured clearance was no longer an issue with a Fujitsubo exhaust system from manifold to muffler. These newer units have better fitment, but every car is different. More photos of the exhaust system in the gallery below:
Driveline Upgrades
With the 3L engine in we focused on the transmission and rear axle. To handle the power from the 3L engine we replaced the stock 4-speed with a Nissan KA24 (FS5W71C) transmission. This was a common swap (before the CD009a came to market) performed by modifying a 280Z L-series bell housing. When we upgraded the transmission we also installed a JWT HD clutch with aluminum flywheel:
As CJ mentioned, he is avid reader of our zcarblog and no stranger to the “Butters” phenomenon: clients desire a similar setup for their own S30s. Our 1971 shop demo Z Mrs. Butters proudly features our Z Car Garage Big-Brakes, Z Car Garage CV Axles, ZCG Heat Shield, 6-speed transmission, full KW suspension (releasing soon) and 3.2L engine with triple-Mikuni induction. Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 200 CV axle kits on customer cars and we are stoked with all of the positive feedback.
We replaced the existing CV Axles (left) with ZCG units (Right). CJ received set #00395. Also visible are the T3 control arms:
Dyno Tuning
Rob dyno tuned the Rebello 3L engine with jetting, A/F and performance in mind as CJ would be driving this Z at 6,500ft above elevation. It put down a stout 261hp/220tq to the wheels:
Enjoy the L-series music in this extended video of CJ’s Z including dyno runs, test drive with Rob and engine/exhaust sounds…volume up!
ZCG Big-Brakes
We are proud to have several of our ZCG products on CJ’s 240z. We installed our Z Car Garage Big-Brakes (for small wheels) which have the been standard on numerous ZCG builds. As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with engineers at Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel (and some 14″ wheels) and retaining factory emergency brake lever.
We removed the stock brakes and installed our ZCG Big-Brake kit. Not only do they perform, they look great behind the 15×8 Watanabe wheels!
Details
Cj’s project involved more than installation of our ZCG performance upgrades and dyno tuning. We nut and bolted the entire car, installed T3 RCAs to fix suspension geometry up front, set the ride height, scaled and aligned it. The gas tank was removed and all fuel recovery hoses replaced along with a new fuel pump. The clutch pedal was removed to allow welding-up of the pivot hole that had wallowed-out. This ensures proper clutch travel to work with his new KA24 transmission/clutch combo. The master cylinder, slave and hose were replaced with all new Nissan OEM components.
Driving is Believing
CJ’s Z was shipped back to Colorado in November and we are happy to report he is Enjoying the Ride in his dream Z…
CJ: “Like so many project cars, the goals of the build evolved and the car grew into something significantly more impressive than the onset of the build. Throughout the car’s time at ZCG Rob was great to work with and he always understood my vision and explained how to make it real. By the time the car came back to me in November of 2022 it may have still looked like the car I sent away, but the similarities were skin deep. From the brakes to the drivetrain the guts of the car were totally new and upgraded.”
CJ was impressed with the upgrades from Z Car Garage:
CJ:“The car is incredible now. It is an absolute animal when you give it full beans and the sounds and sensations it creates for me as a driver are like nothing I’ve ever experienced in a car. It is well mannered and drivable at low speeds and can cruise comfortably and quietly in 5th on the highway, but the instant you open up the right pedal it will shove you back in your seat with a massive grin on your face. The best thing about the car to me is the way each piece is set up to work together. The new ZCG brakes and axles work with the new transmission, OS Giken diff, suspension set up, and stout Rebello 3L to deliver a driving experience that is both exciting and confidence inspiring.”
CJ: “One of the coolest things about these old Z cars is the variety of people who love them. When I am out for drives I am just as likely to encounter a 19 year old kid who loves the car as I am to encounter a 79 year old with the same enthusiasm.”
We enjoyed working with you CJ, thank you for your support! Enjoy the photo gallery below.
Rob: “We enjoyed working with CJ, not only does he have a bitchin’ Z car, he’s fun to work with, very responsive and we had great conversations. He did not hold back in communicating his needs and we were happy to deliver the goods like we always try to. Honored to have folks locally and globally that want to work with ZCG. Thank you so much CJ, Long Live The Z.”
Related Articles
No user responded in this post