The stories behind every Z car and their owner play a huge part in our love for keeping them on the road. The Nunes family has owned this 1978 Datsun 280Z 2+2 from new, starting with Gilbert and soon to be passed on to his son Dillon. This S30 was treated to a ZCG-style mechanical restoration including a new drivetrain, engine bay restoration, our Z Car Garage Big-Brakes and Z Car Garage CV Axles, total suspension rebuild and more.
.
We admire the 280z cars (see Cece, Greg and the Roth’s builds) and met with Gilbert to discuss his needs. Updating the Z while preserving the exterior patina was the vision. First, let’s take a look at the Nunes’ family history with their Z.
From Father to Son to Grandson
Gilbert recalls how he got the Z:
“It was Christmas of 1977 and my parents decided to reward me for doing good during my first year of College at San Jose State. On Christmas Day by surprise I was handed a little box with keys in it. They knew I wanted a sporty car, but they had their own requirements. My dad wanted it to be an automatic, and he wanted a back seat so our whole family could fit in the car. The first attempt at buying a 280z didn’t work because of a dumb salesman at Downtown Datsun…
…They went there and asked to look at the Z’s however the salesman didn’t want them to buy a Z thinking they were too old for one. So they went to Stevens Creek Datsun and found a salesman who was dying to sell a car since Christmas was close. So in no time at all they found a automatic 280Z 2+2. I had no idea of the color or exactly what I was getting when I pulled up to the dealership, but I was very happy with the car.”
Gilbert would daily drive the Z that he got from his parents for 30+ years. His son Dillon grew up in the back of the 2+2 and has fond memories:
“My dads 280 is actually still in his possession, it will be left to me some day. I have a lot of stories from growing up in this car, mainly being a little kid and my dad letting me ride in the backseat with no booster seat because the seats are small enough. I remember of my dad driving my sister through a decent sized flood making sure she made it to her piano recital, all in the Z…
…I was very excited about getting my Dad’s car restored (it’s something we have literally talked about for 20 years). I’m not sure how he heard of Z Car Garage but I know I have been going there almost all my life. My earliest memory at ZCG was at a Friday car meet (Our 5th Anniversary gathering) where bbq burgers and hotdogs were being served. I was about 12 years old, and loved seeing all the Z’s and other Nissans, especially the GT-Rs.”
The Nunes family dropped off their beloved 280Z at the shop and the transformation started.
Drivetrain
Gilbert’s Z received a total engine bay restoration along with upgrades to the driveline for smoother driving and improved torque. Please visit the gallery below for more pictures documenting the engine bay restoration work, it’s where our efforts shine!
Engine
A fresh 2.8L “street” engine with replaced the tired L28 (above), new L28 below:
Intake manifold cleaned up and powdercoated:
An MSA exhaust header was installed. Powdercoated and plated parts laid out for installation. We bag/tag every nut and bolt:
All new hydraulic lines, emissions plumbing and more engine bay clean-up (full re-paint by our man William) before/after. More pics in the gallery!
More detail work:
Engine bay restoration, before/after:
Suspension
Gilbert wanted a fantastic driver that was worry-free. We replaced all of the hydraulics and front/rear suspension assemblies to match the new driveline. All suspension was either zinc’d or powdercoated:
We installed KYB strut inserts with lowering springs, Suspension Techniques sway bars, Techno Toy Tuning adjustable rear lower control arms, TC rods, and rack bushings, all new wheel bearings and new ball-joints. We do offer a full coil-over setup for track day/performance-oriented customers, and this spring/strut upgrade for those that want a better stance with improved handling without getting beat up.
Suspension refresh with T/C rod and steering rack detail:
Rear end with T3 lower control arms in:
ZCG Big-Brakes and CV Axles
As fellow S30 owner/racer Glenn C mentioned in his review, on top of braking performance, pedal feel is extremely important and our Big-Brakes deliver. This is a direct result of working with Stoptech to create a totally bolt-in solution requiring no M/C change or additional proportioning valve/adjustments. All fitting behind a 15″ Watanabe or Panasport wheel and retaining factory emergency brake lever! A few details below:
Calipers: Stoptech ST42 4-piston front & rear race calipers (Alum 6061 mil-spec Type III anodized)
Rotors: 280mm x 20.6 with Alum 7075 hats
Pads: Stoptech 309 sport street pads
Blog posts documenting all of our customers running the ZCG Big-Brakes can be found HERE.
A few closer detail shots of the calipers, rotors and hardware:
We went ahead and got Gilbert dialed in with the ZCG big-brake kit for small wheels with parking brake and a new brake booster/master cylinder. More pics in the gallery!
Front brake installation:
Our Z Car Garage CV Axles help transmit power to the ground and ensure smoother operation compared to your standard half shafts. We have over 130+ CV axle kits on customer cars and we are stoked with all of the positive feedback.
Gilbert’s standard half-shafts shown on left and ZCG CV Axles on right. Also note plated brake lines:
Panasport Wheels
Our ZCG Big-Brakes also look great behind Panasport wheels in our offset allowing us to run 225/50/16 tires (Bridgestone S-007a). Gilbert really wanted black so we had the spokes powdercoated in black with the polished lips cleared…they look sharp!
Details
The little things are what we excel at. The rear differential was refurbished. All electrical connections re-done. The original A/C system was retrofitted to use R134a refrigerant and made to blow super cold. New battery cables and wiper blades. We also replaced all of the fuel vapor hoses in the hatch. Please check the gallery below for more detail shots, there are too many to list in this blog post!
Enjoying The Ride
Gilbert’s son Dillon came down to ZCG pick up the 280. He was impressed:
“As far as how the car performs, its amazing. I have taken the car on a few drives and from my perspective the car corners like its on rails and stops on a dime. I took it up Sierra road and had a blast, still waiting to take it up highway 9. I was also surprised by how smooth it was driving on the freeway to a car meet at the USS hornet. With the stiff suspension I expected an unpleasant ride all the way to Alameda but was pleasantly surprised at how smooth it was cruising at 85mph on 880. My only complaint is the auto trans, I would personally prefer to have it converted to a 6 speed that I have seen on your blog but my dad hates manuals:(“
Dillon and the Z at the local VALT Cars and Coffee in Alameda:
Here is a short video from Dillon shortly after picking the Z up:
Gilbert is enjoying the Z as well!
Thank you Gilbert for letting us re-birth your Z car. It makes us happy to see it being driven and soon passed on to your son Dillon. ZCG is honored to help keep the family Z on the road.
LONG LIVE THE Z!
Related Articles
No user responded in this post