At Z Car Garage we love keeping Z’s on the road. From concours-level restorations to light refurbishments, making a client’s goals reality is our passion. Richard W brought his 1971 Datsun 240Z from Eureka, Ca for a full mechanical restoration, ZCG-style. Our Z Car Garage Big-Brakes, Z Car Garage CV Axles and Z Car Garage Heat Shield along with a new drivetrain and full suspension transformed this Series 1 S30.

  

In 2017 Richard contacted us to inquire about restoration work. He understood we were booked, and we spoke again later, but this time he visited the shop with a photo album filled with photos of his beautiful, Sunshine Yellow Z.

“I did my due diligence and researched what ZCG could do, and arranged for a meeting with Rob to discuss my car. I asked if he would be interested in restoring my 1970 240 Z.  He was pretty adamant, ‘I don’t restore those rust buckets anymore.’ A little disheartened but I persisted. Would you take a look at the album I have of my car? He flipped through he pages and you could see him light up and the enthusiasm came forth. He said, ‘Where is the rust?’. I told him there was none as the car has been indoors for the last 40 years.”

 

Rob and Richard agreed that since the exterior was in great shape ZCG would perform a mechanical restoration. Richard is in his 70’s and still practices dentistry in the small town of Eureka. After being parked for decades he trailered the Z down and arrived at ZCG in January 2018 . Here is VIN #12291, with 63k original miles:

 

He bought this Z brand new 12/70 and absolutely adores it, being an integral part of his life for half a century! We love the story behind Richard’s Z lets’ take a look before going into the mechanical work…

Life With The Z

 

“We all have defining moments in our lives and those moments need to be prioritized. The marriage to my wife of 50+ years is of course the most important moment. She provided the resources to live in San Francisco and was so supportive of my graduation from college. That same year she became pregnant with our first born. We moved to Eureka at the same time. I was able to start my own business in 1970 and begin an adult life. All the important hurdles were checked off. We moved to Eureka with $300 in our pocket and a mountain of debt. But wait, there was one more hurdle…”

 

“…From across a parking lot, in Eureka no less, stood a bright yellow Ferrari. Upon closer inspection I was even more baffled. What was a Datsun 240Z?  I went to the local Datsun agency, long before Nissan came along and made my inquiry. Yes, the new 240Zs are very special and very desirable. They were being shipped in but there is a waiting list. Just add my name.  Sure enough they called a few weeks later and said there was an Orange Z on the lot. They made the mistake of letting me wring that car out and I was sold. While I was in school in San Francisco, I saw Cobras and Porsches that cost $6 – $7,000. Way out of my league but I could afford the $3,600 Z. Even if it meant borrowing $1,200. In early December 1970 I took possession of my Z. It became my car and my identity. It has remained just that for the last 50 years.“

 

“My oldest son was born the following February. Now all the pieces for my life fell into place. Marriage, college, moving to a permanent home, birth of our son and the final piece, my sports car. Being a young family in the ‘70s was simple. We just put Jason between our two seats the Bull Dog in the back and off we drove. No thought of a car seat. Before he was six months old, we had been the 700 miles to San Diego and the 700 miles to Canada. Not a care in the world and a wonderful way to see the country.” 

 

“My car was a daily driver. For the next 20 + years that was my car. As my boys grew up and learned to drive, I needed to provide a car for them for high school. Well, not my car.  So, I bought them an upgraded and modified ’71 240Z. I bought the Z because I felt they would be safer in that car. I didn’t want a larger car they would put a lot of friends in. Later on, I heard they actually had put 5 guys in the Z car.” 

 

Of course, over time, tastes changed and Richard succumbed to buying a 1992 Corvette. You know, the ones you fall into and climb out of. Fast forward to 2015 and his 240Z is in the garage, covered with the things a guy collects in a garage. The ‘vette became useless and the family all preferred the Z. This is where ZCG becomes part of Richard’s Z car journey. Let the mechanical restoration begin on this Series 1 that has not run since 1985…

Drivetrain

 

We got the original L24 with SUs running after sitting for years, but Richard wanted more power and Rob suggested a Rebello 3.1L engine. Supporting parts included an MSA 6-into-1 header, ZCG exhaust system, internally regulated 280ZX alternator, 280ZX gear reduction starter, KOYO race radiator (custom upper hose) and Z Car Garage Heat Shield. Here are a few pictures of the engine build/installation with many more in the gallery:

 

Powdercoated and plated parts adorn the engine:

 

Induction is handled by triple-Mikuni PH44 carbs on a Harada intake manifold.

   

Beneath the triple-Mikunis is our Z Car Garage Heat Shield, serial #00250:

 Before/After the engine bay restoration, more details below:

 

To handle the power from the 3.1L engine we replaced the stock transmission with a Nissan KA24 (FS5W71C) transmission. This was a common swap (before the CD009a came to market) performed by modifying a 280Z L-series bell housing. The KA24 unit is significantly stronger than early S30 transmissions.

 When we upgraded the transmission we also installed a JWT HD clutch with aluminum flywheel. Helping put the power down efficiently is an OS Giken LSD. The R180 houses a 4.11 R&P and the assembly is setup in-house (by Joshua Corwin). Rounding out the drivetrain upgrades are a set of Z Car Garage CV Axles (shown below)

  

Engine Bay Services

Richard’s Z received a total engine bay restoration. Please visit the gallery below for more pictures documenting the engine bay restoration work, it’s where our efforts shine!

 

With the engine/transmission removed we focused our efforts on restoring the engine bay.  Everything was cad plated or powdercoated.  All new fuel hoses, every cooling hose and all new hydraulic lines. Every nut/bolt is bagged and tagged before re-plating.

    

The Z’s body had been painted once before but the engine bay was left un-touched. We called upon our man William from William’s Auto Body re-spray the 919 Sunshine Yellow and it turned out fantastic. Before/After:

     More before/after shots showing fuel pump, hydraulic an coolant lines:

   

With the new engine/transmission even more detail work was performed:

 

Final Before/After in the engine bay:

 

Our ZCG Exhaust system using 2.5″ piping to a stainless resonator and Magnaflow muffler with slash-cut tip. Listen to the sound in the video below!

Dyno Tuning

 

Rob dyno tuned the Rebello 3.1L engine making a stout 199hp/221tq to the wheels. Enjoy the L-series music in this extended video of Richard’s Z including dyno runs, test drive with Rob and drive-bys:

 

Suspension

 

Richard’s chassis was treated to a full suspension rebuild with new parts, bushings and a full coil-over (Koni struts with our spring rates) suspension from Techno Toy Tuning. T3 finishes the suspension in our signature color and we really appreciate Gabriel and his staff. They make some of the best suspension parts out there for Z cars.

  

New parts included the T3 adjustable T/C rods, T3 rear control arms, T3 front/rear strut tower bars, new ball joints, new front bushings, all new bearings and seals and ST sway bars. Richard wanted a fantastic driver that was worry-free. We replaced all of the hydraulics and front/rear suspension assemblies to match the new driveline.  All suspension was either zinc’d or powdercoated:

 

Front Suspension refresh with T/C rod, crossmember and steering rack detail:

       
Rear end with T3 lower control arms and ST Sway bar:

 

 

Richard was ecstatic. It was the reaction we live for at ZCG: