Brian K is an avid Datsun fan and talented machinist. He is also the man behind our Z Car Garage CV Axles. When he’s not enjoying Datsuns, Brian owns/operates KaD Models machine shop in Berkeley, CA. In addition to the fully restored yellow S30 shown above, here are a few cars in his stable:
We are proud of Brian as his 1967 Nissan Patrol was displayed last weekend at the Pebble Beach Concours d’Elegance! Brian visited Z Car Garage for a few things on his Z including our Big-Brakes for small wheels, door seals and dyno tuning.
Finding the ’72
Let’s start with a brief history of Brian’s 240z. It’s an early ’72 built in 11/71, early enough to still have vertical defrosters and elastic strapped seats. Brian bought the car with the intention of doing a period correct restoration with some current tech modification.
In June of 2016 I found a very good candidate for this build. A factory 112 colored 240z. The car was purchased in Los Altos and driven home. For 5 months I drove the car and made notes of trouble areas. In December I stripped it, sent the body to the body shop and engine to Rebello.
Meanwhile I had my 1967 Datsun 2000 to build so I was happy knowing I had storage. The body work took a solid 14 months and the engine was ready in about the same time. The engine is a numbers matching “purists” build making 302hp on the engine dyno. The transmission is a zx 5 speed…a rebuilt Craigslist find:
The clean aesthetic and details in the engine bay showcase Brian’s restoration skills:
Z Car Garage CV Axles
With significantly more power than stock, upgrading the stock half shafts adds piece of mind as well as smoother operation. Power is sent to an open 3.54 R200 courtesy of Junkyard Jenn, and transferred to the rear wheels via Z Car Garage CV Axles. Brian installed the CV axles himself (with our blessing) 🙂 Note the Z story exhaust, more on this later:
Brian visits Z Car Garage
Upon completion of my ’67 Datsun 2000 I had the opportunity to meet Rob at ZCG for a dyno tune that Alvin set up. This was my first face to face with their shop. What I found was a lot of Datsun/Nissan passion and a shop that is well presented. I found many similarities in speaking with Rob. When researching brakes for Z cars I found many types…and because of the web I found all sorts of confusing and conflicting arguments. I knew ZCG made a big brake kit but my temporary Konig Rewinds were to be replaced with my still in process 15″ Volk Racing centerlocks.
ZCG Big Brakes for Brian’s 240z
A couple months later there was a write up on Glenn Chiou’s Fairlady 240Z-L…this was about big brakes for small wheels and that’s all I needed to hear. From what I know of Rob and ZCG, they don’t sell things until they are sure to perform better than other options with little chance of failure. My car wasn’t yet running but I made an appointment for the install.
Brian came in to ZCG and we installed the ZCG Big Brakes, replacing the factory disc/drum setup:
Front:
Rear, including the fully-functioning parking brake:
A few more detail shots of the 4-wheel discs:
Brian also had a few things on his mind and we took care of them:
When I arrived at Zcar Rob asked if there was anything else he should be aware of or I was concerned about. Mind you I had had the car together for all of 8 days and 78 now 134 miles. I gave him a list: Speedo drive is not engaging, precision rubber door seals are making me cry, one stripped rear stud and exhaust hitting things issue.
The Z story exhaust system was hitting the chassis so we re-aligned it eliminate rubbing:
ZCG Door Seals
Brian was having trouble with door fitment so we put the ZCG door seals on it:
All doors were aligned to make it open/close nicely. Before/after:
Brian was happy with the results and he doesn’t let just anyone work on his cars. Actually, he’s always done it himself:
I was a Honda then Chrysler ASE mechanic prior to becoming machinist. This was the first time I was leaving my car in the hands of another shop aside from Factory maintenance on my late model cars. Was I worried…. slightly. I left though in a loaner. I received pictures throughout the day on status and was invited to pick the car up and run a dyno tune. There were some issues that I was sent away as homework so the dyno tune although showing a healthy 235 whp was full of scatter.
You can watch the dyno run and hear the Z story exhaust in this video below:
Getting Brian back on the road
Brian was heading back to our shop for a quick dyno tune on his way to the Mt. Shasta Datsun Roadster Meet when a last minute setback occurred:
I was invited to return the following Wednesday before the annual Mt Shasta Datsun roadster meet. I’d opted to bring the 112 z and my 67.5 2000. The previous weekend I I had driven many miles, had done a Fun Run had put an additional 600 miles on the car. While running down 880 I was zipping along in 5th gear and just before exiting to ZCG I was in neutral. I knew right away…. someone forgot to stake the nut. It was 730AM and the day was not going well. I arrived at Z car and Rob greeted me and said let’s do this… I said I have bigger problems. 5th isn’t with us anymore but I think the nut backed off and I am pretty sure it’s okay but no dyno. Rob said “ do you want me to yank it and put it back together today?”
Brian indeed had an early Z 5-speed and they are known to have the mainshaft nut back off resulting in 5th gear loss:
We removed and replaced the transmission, got on the dyno at 3pm and put him back on the road to Shasta where the Z won 2nd in its class! Thanks for trusting us to work on your freshly restored beauty. More pictures in the gallery below and you can follow Brian on Instagram. Enjoy The Ride Brian!
For reports on other customer cars running Z Car Garage Big Brakes and CV Axles, please visit the links below: